Page 1
Quickstart Guide
Flex Active Flip Table
37319
™
Important
Before using this product:
• Read this manual
• Comply with all safety and operating instructions
• Ensure all parts and correct quantities are included
Any parts damaged during shipment must be reported within 5
days of receipt. To report information regarding missing parts or
damage, to purchase parts or accessories, or if you have any
questions, please contact us.
Thank you for purchasing Spectrum products!
??
Owner’s Manual
Le manuel du propriétaire
El manual del propietario
Important
Avant d’utiliser ce produit:
• Veillez à lire ce guide
• Respectez les consignes de sécurité et d’utilisation
• Vériez que vous disposez de toutes les pièces
nécessaires à l’installation
Les pièces endommagées pendant le transport doivent faire
l’objet d’un rapport dans les 5 jours de leur réception. Veuillez
prendre contact avec nous si des pièces manquent ou sont
abîmées, si vous avez des questions, ou encore pour acheter
des pièces ou des accessoires.
Merci pour votre achat d’un produit Spectrum!
www.spectrumfurniture.com
Specs
Spécications
Especicaciones
Importante
Antes de utilizar este producto:
• Lea este manual
• Cumpla con todas las instrucciones de prevención de
accidentes y operativas
• Revise que todas las partes y las cantidades correctas
estén incluidas
Si alguna parte se dañó durante el embarque, deberá reportarla
en un lapso de 5 días a partir de la recepción. Para reportar
cualquier información sobre partes faltantes o dañadas, para
adquirirlas o comprar accesorios, o bien, si tiene alguna duda,
póngase en contacto con nosotros.
¡Gracias por adquirir productos Spectrum!
Video
Vidéo
Vídeo
800-235-1262
0191038 Page 1 of 4
Page 2
Cove Module
(may or may not
be included)
Components
(1) Worksurface assembly
Hardware
(4) 0105662
Stem Caster 60mm
(8) 026064
1/4-20 x 5/8” PHMS
5/16-18 x 1”
Important Safety and Care Instructions
• Read this owner’s manual before assembly or operation.
• Do not allow children to move the table.
• For indoor use only. Do not install or store the table where it will be
exposed to moisture.
• Do not block the ventilation openings.
• Do not allow anyone to sit, stand, or climb on the table.
• Use a damp, soft-cloth, or sponge, with mild soap or detergent solution
to clean dirty surfaces. Do not use harsh solvents or abrasives.
• This table is intended for institutional use. It does not have any userserviceable parts or user-maintenance requirements. If servicing is
necessary, please contact Spectrum Industries for assistance.
Warning - Relocating audio and/or video equipment to furniture not specifi cally
designed to support audio and/or video equipment may result in death or
serious injury due to the furnishing collapsing or over turning onto a child.
Warning - Death or serious injury may occur when children climb
on audio and/or video equipment furniture. A remote control or toys
placed on the furnishing may encourage a child to climb on the
furnishing and as a result the furnishing may tip over on to the child.
(2) 0141220
Flex Active Flip leg
(4) 051070
Cable clip
General Electrical Safety:
• Keep power switches in the OFF position before plugging or
unplugging from the wall outlet.
• Be sure total device / equipment load does not exceed 12-amps.
• Do not plug power cords into an extension cord.
• Inspect power cords for damage before each use. Do not use cords
that are damaged.
• Unplug power cord from electrical outlet by gripping the cord-do not
unplug by pulling only on the cord.
• Do not step on, drive over, drag, or place objects on power cords.
• For added safety, plug into a grounded outlet controlled by a GFI
(Ground Fault Interrupter) circuit breaker.
• Damaged electrical components can create signifi cant hazards to
users and is not covered by the warranty. Repairs should always be
performed by a qualifi ed electrician.
• Electrical devices are not toys. Children are often unaware of the
hazards associated with electrical devices. This table must always
be used by adults or with adult supervision.
(4) 026073
#8 x 3/4” PHSM
0191038 Page 2 of 4
Page 3
Assembly
Attach legs to worksurface assembly1
Leg
4
1/4-20 x 5/8” PHMS
(4 per leg)
2
Install casters
Leg
1
3
2
Worksurface Assembly
1
”
/
2
3
Secure any power cords
X 4
#8 x 3/4” PHSM
X 4
Cable clip
Power cord
Worksurface
Pilot hole
0191038 Page 3 of 4
Page 4
4
Place upright
X 2
5
Flipping worksurface
1
2
6
Casters
7
Nesting
© 2018 Spectrum Industries Inc., All rights reserved.
0191038 Page 4 of 4
Loading...