Pub. 0100223-02 A
Installation Instructions
English Section
InView P22R Adapter Plate
Catalog Number 2706-PNR2
Publication 2706-IN020A-EN-P - January 2004
Installation Instructions
English Section
InView P22R Adapter Plate
(Catalog Number 2706-PNR2)
Overview
For additional information, refer to:
• InV
iew User Manual, publication 2706-UM016.
• InView P22R Installation Instructions, publication 2706-IN014.
• The
InView publications can be found in the Manuals-On-Line section of
www.ab.com or theautomationbookstore.com.
Adapter Plate Mounting
The following steps provide instructions for installing the adapter plate in an
existing DL40 Plus four-line display panel opening.
1. Dril
l the appropriate mounting holes in the enclosure or panel.
Drill Holes
0.25 in (6.35 mm)
Drill Holes
0.25 in (6.35 mm)
2. Remove the six mounting nuts from the hardware bag provided with the
plate.
3. Pos
ition the adapter plate (2706-PNR2) in the panel or enclosure mounting
hole.
4. Inst
all nuts and alternately tighten the nuts to a torque of 0.904 Nm (8 in-lb).
Publication 2706-IN020A-EN-P - January 2004 PN 41061-345-01(1)
Supersedes Publication XXXX-X.X.X - Month Year Copyright © 2004 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
InView Display Mounting
The following instructions provide panel cutout dimensions for the InView P22R
Panel Mount Display.
The InView P22R mounts in a custom panel or enclosure. When it is properly
inst
alled, the faceplate provides a NEMA Type 12, 13, and 4X(indoor) rating. To
install the InView Display:
1. Cut
and drill the appropriate mounting holes in the enclosure or panel.
2. Rem
ove the six mounting nuts from the hardware bag provided with the
display.
3. Pos
ition the InView Display in the panel or enclosure mounting hole.
4. Install nuts and alternately tighten the nuts to a torque of 0.904 Nm (8 in-lb).
Panel Cutout Dimensions
Cutout 345.9 (13.62)
Cutout
173.0 (6.81)
98.4
(3.88)
352.3 (13.87)
Cutout
88.9
(3.50)
176.3 (6.95)
4.8 (0.19)
4.8 (0.19)
6.4 (0.25)
Diameter
Hole
6 places
2706-P22R Display
All dimensions are in millibeters (inches)
Loading...