![](/html/47/4746/4746c87de2fd1ed6db9d517aeb66fea5582c1581ba4552f599c6ee147e73c7c5/bg1.png)
Owner’s Manual
Freedom One Sit-to-Stand (S2S) Workstation
For Sprout 1.55 by HP
55368-Q45
55368-Q46
®
, and Sprout Pro G2
Important
Before using this product:
• Read this manual
• Comply with all safety and operating instructions
• Ensure all parts and correct quantities are included
Any parts damaged during shipment must be reported
within 5 days of receipt. To report information regarding
missing parts or damage, to purchase parts or accessories, or if you have any questions, please contact us.
Thank you for purchasing Spectrum products!
Spectrum Industries, Inc
925 First Avenue, Chippewa Falls, WI 54729 USA
800 235 1262
715 723 6750
www.spectrumfurniture.com
0190103R2 Page 1 of 8
![](/html/47/4746/4746c87de2fd1ed6db9d517aeb66fea5582c1581ba4552f599c6ee147e73c7c5/bg2.png)
IMPORTANT SAFETY INSTRUCTIONS:
Important Safety and Care Instructions
DANGER - Read all instructions before using
DANGER - General Safety:
1. SAVE THESE INSTRUCTIONS
2. Do not allow children to move.
3. Do not leave unit unattended in areas where children have access.
4. Keep unit locked when unattended.
5. Proceed slowly and carefully when moving.
6. Close supervision is necessary when this furnishing is used by, or
near children, invalids, or disabled persons.
7. For indoor use only. Do not install or store where it will be exposed to
moisture.
8. Do not block the ventilation openings.
9. Avoid uneven loading of the equipment into the unit. Uneven weight
distribution could cause unit to tip when mobile.
10. Do not allow anyone to sit, stand, or climb on the unit.
11. When loading, place heavier objects near the bottom of the unit to
avoid tipping.
12. To clean dirty surfaces, use a damp, soft-cloth, or sponge, with mild
soap or detergent solution. Do not use harsh solvents or abrasives.
13. Never drop or insert any object into any opening.
14. This unit is intended for institutional, commercial use only.
15. Use this furnishing only for its intended use as described in these
instructions. Do not use attachments not recommended by the
manufacturer.
16. This unit does not have any user-serviceable parts. If servicing is
necessary, please contact Spectrum Industries for assistance.
DANGER - To reduce the risk of electric shock:
1. This furnishing is only to be used with the power supply unit provided.
2. Always unplug this furnishing from the electrical outlet before cleaning.
3. For added safety, plug the cart into a grounded outlet controlled by a
GFI (Ground Fault Interrupter) circuit breaker.
4. Keep the power switch in the OFF position before plugging or
unplugging from the wall outlet.
5. Turn devices OFF before plugging them in.
6. This furnishing has a polarized plug (one blade wider than the other).
This plug will t into a polarized outlet only one way. If the plug does
not t fully into the outlet, reverse the plug. If it still does not t,
contact a quali ed electrician to install the correct outlet. Do not alter
the plug in any way
7. Do not plug the power cord into an extension cord.
8. Inspect the power cord for damage before each use. Do not operate if
cord or plug has been damaged, or has come into contact with water.
9. To disconnect power, turn all controls to the OFF position, then
remove plug from outlet. Do not pull on cord.
10. Disconnect power before adding or removing components.
11. Do not run power cords across hallways or classrooms. Do not step
on, drive over, drag, or place objects on cord. Keep cord away from
heated surfaces.
12. If servicing is necessary, please contact Spectrum for assistance.
13. Damaged electrical components can create signi cant hazards to
users and is not covered by the warranty. Repairs should always be
performed by a quali ed electrician.
14. Electrical devices are not toys. Children are often unaware of the
hazards associated with electrical devices. This cart must always be
used by adults or with adult supervision.
WARNING
Relocating audio and/or video equipment to furniture not speci cally
designed to support audio and/or video equipment may result in serious
injury or death due to the furnishing collapsing or over turning onto a child.
WARNING
A remote control or toys placed on the furnishing may encourage a child
to climb on the furnishing and as a result the furnishing may tip over
onto the child. Serious injury or death could occur when children climb
on audio and /or video equipment furniture.
CAUTION
• Always unplug workstation before working under the worksurface.
• Do not place anything under worksurface when operating lift.
• Use caution when raising or lowering the worksurface!
• Be sure workstation movement does not interfere with objects
or people
Moving and parking the workstation
• Before moving, unplug and secure all power cords.
• Close and lock doors.
• Remove any items from the top of the worksurface.
• Unlock the casters.
• Push slowly and carefully. Do not move over uneven or irregular surfaces.
• Do not allow children to move.
• Lock the casters after moving.
CAUTION
Risk of Electric Shock. This unit may have multiple power cords. Unplug
all power cords before moving or servicing this furnishing.
WARNING
To reduce the risk of burns, re, electric shock,
or injury to persons, unplug from outlet(s)
before installing or removing components
• Do not park unit in areas of heavy trafc.
• Do not run power cords across hallways, classrooms, or other areas
where they will be walked on.
• Do not leave unit unattended in areas where children have access.
• Keep doors closed and locked whenever unit is unattended or parked.
• Keep casters locked whenever the workstation is unattended.
0190103R2 Page 2 of 8
![](/html/47/4746/4746c87de2fd1ed6db9d517aeb66fea5582c1581ba4552f599c6ee147e73c7c5/bg3.png)
Hardware
(1) 0103500
2.5” Plug
See separate instructions for installation instructions
(1) 0131416
Silver rear security bracket
(Designed exclusively for
Sprout 1.55 by HP)
(1) 0132920
Black rear security bracket
(Designed exclusively for
the Sprout Pro G2)
(1) 0132918
Black plastic retainer bracket
(slotted holes)
(Works with Sprout 1.55 by HP,
and Sprout Pro G2
(4) 0114470
3/8-16 x 5/8” Bell glide
(4) 0102297
7mm x 30mm JCWS
(2) 026059
1/4” Flat steel washer
(1) 025039
4mm Hex wrench
0190103R2 Page 3 of 8