Spectrum 55263 Assembly Instructions Manual
Assembly Instructions:
(4) 052605
1/4-20 x 15mm JC Bolt
(8) 026073
#8 x 3/4" PHSM
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
5 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
Attach Folding Brackets to Shelf Support
1.
A. Attach the (2) Folding Brackets to the Shelf Support with (6) 8-32 x 1/2" PHM Screws and Locknuts (3 per bracket) as shown in Figure 1.
Tighten securely.
Folding Bracket
(6) 021587
8-32 x 1/2" PHMS
(1) 039622
2" Grommet
(6) 029019
8-32 Locknut
Tools Required:
Phillips Screwdriver
Adjustable Wrench
Media Director V2 Flip-Up Shelf
#55263
8-32 Locknut
Shelf Support
8-32 x 1/2" PHMS
(3 per Bracket)
Figure 1
0103308X Page 1 of 2
Attach Shelf Support/Bracket Assembly to the Lectern
1/4-20
15mm JC Bolts
2.
A. Determine the preferred side of the lectern to locate the shelf.
B. Attach the Shelf Support/Bracket Assembly to the Lectern using (4) 1/4-20 x 15mm JC Bolts. This assembly can be mounted at
several different heights depending on the application. Figure 2. (This Shelf is shown in the upper position.)
Note: If you are mounting the Flip-up Shelf to a lectern with a
Handle, the Shelf and Handle can be on the same side if
Shelf Support/Bracket
Assembly
Figure 2
preferred, but the Shelf needs to be mounted in the middle or
lower position.
2" Grommet
x
Attach Shelf to Folding Brackets
3.
(4 Req'd)
#8 x 3/4" PHSM Screws
Shelf
Folding Bracket
(4 per Bracket)
A. Attach the Shelf to the (2) Folding Brackets with (8) #8 x 3/4" PHSM Screws
(4 per bracket) as shown in Figure 3. Tighten securely.
B. Install the 2" Grommet.
Figure 3
0103308X Page 2 of 2
Loading...