Spectrum 3D2GO Assembly Instructions Manual
Assembly Instructions
3D2GO™ Printer Cart
37133
Important
Before using this product:
• Read this manual
• Comply with all safety and operating instructions
• Ensure all parts and correct quantities are included
Any parts damaged during shipment must be reported
within 5 days of receipt. To report information regarding
missing parts or damage, to purchase parts or accessories, or if you have any questions, please contact us.
Thank you for purchasing Spectrum products!
925 First Avenue, Chippewa Falls, WI 54729 USA
??
Spectrum Industries, Inc
800 235 1262
715 723 6750
www.spectrumfurniture.com
http://www.spectrumfurniture.com/en/products/3d2go-printer-cart
i
Information Specs
800-235-1262
0190572R2 Page 1 of 6
Important Safety and Care Instructions
• Read this owner’s manual before assembly or operation.
• Do not allow children to operate.
• For indoor use only. Do not install or store where it will be exposed to moisture.
• Do not block the ventilation openings.
• Do not allow anyone to sit, stand, or climb on the unit.
• Use a damp, soft-cloth, or sponge, with mild soap or detergent solution to clean
dirty surfaces. Do not use harsh solvents or abrasives.
• This unit is intended for institutional use. It does not have any user-serviceable
parts or user-maintenance requirements. If servicing is necessary, please
contact Spectrum Industries for assistance.
Warning - Relocating audio and/or video equipment to furniture not specically
designed to support audio and/or video equipment may result in death or
serious injury due to the furnishing collapsing or over turning onto a child.
Warning - Death or serious injury may occur when children climb on audio
and/or video equipment furniture. A remote control or toys placed on the
furnishing may encourage a child to climb on the furnishing and as a result
the furnishing may tip over on to the child.
Components
Note: Depending on conguration ordered, not all components below may be included.
Worksurface Option
(1) Worksurface-plain - 0134251 (1) Worksurface with surround - 0134984
Electrical Safety:
• Keep the power switches in the OFF position before plugging or unplugging
from the wall outlet.
• Turn OFF the devices before plugging them in.
• Ensure total device / equipment load does not exceed 12-amps.
• Do not plug the power cord into an extension cord.
• Inspect the power cords for damage before each use. Do not use power
cords that are damaged.
• Unplug power cord from electrical outlet by gripping the cord. Do not unplug
the power cord by pulling only on the cord.
• Do not step on, drive over, drag, or place objects on the power cord.
• For added safety, plug the cart into a grounded outlet controlled by a GFI
(Ground Fault Interrupter) circuit breaker.
• Damaged electrical components can create signicant hazards to users
and is not covered by the warranty. Repairs should always be performed by
a qualied electrician.
• Electrical devices are not toys. Children are often unaware of the hazards
associated with electrical devices. This unit must always be used by adults
or with adult supervision.
Electrical Option
(1) 0135039 - Cover (1) 0190043 -
Power Switch
(1) 0190047 - 8’ IEC
Power Cord
Cart Hardware
(2) 0116530
Cord Wrap
(4) 0101382
#14 x 7/8”
PHSM
Leg Option
(2) 0135884 - Glide-length leg (2) 0133958 - Caster-length leg
(4) 037779 - 5/16-18 Glide
(4) 0190564
1/4-20 x 2-1/2”
PHMS
(4) 0190100
5” Balloon
Wheels (BW)
(1) 039622
2” Grommet Cover
(4) 050033
4” Heavy-Duty
Casters (HD)
(1) 059984
2” Grommet
(12) 026064
1/4-20 x 5/8”
PHMS
(1) 0133970 - Rear bracket (1) 0133969 - Front bracket
(1) 0133982 - Steel Panel
(4) 0106543
1/4-20 Keps
Nut
(1) 051070
Clip
(3) 026057
#10 x 3/4”
PHSM
(16) 041943
1/4-20 Locknut
(16) 026064
1/4-20 x 5/8” PHMS
0190572R2 Page 2 of 6
Loading...