Spectra Logic T-Series Spectra T50 Quick Start Manual

Components Shipped with the Library

Tabletop Configuration

Rack Mount Configuration (Optional)

Preparing the Library

Spectra T50 Library

Quick Installation

Before You Begin ...

Become familiar with the
items that shipped with your
library.

Prepare the library for
tabletop or rack mount
configuration.

1

2

3

Stylus

TeraPack Magazines
(minimum of two)

Terminator

Power
Cord

14 in. (35.6 cm)

CCAAUUTTIIOONN

:

The library must
be installed on a
ssttrroonngg,, ssttuurrddyy,,
lleevveell ssuurrffaaccee

.

Nothing should
ever be placed
directly on top
of the library.

Rubber
Feet

4

Position the mounting brackets on the front of
the library with brackets’ square cut-outs aligned
at the bottom edge of the library. Secure the
brackets using four Phillips screws.

Plug the power
cord in to the
library and in to
a power outlet.

Press the power
button to power
on the library.

su

Type

ssuu

in the
User field, then
select

LLooggiinn

.

(No password
until one is set.)

LLIIBBRRAARRYY IINNFFOORRMMAATTIIOONN::

PPaarrtt NNuummbbeerr:: ________________________________________________

SSeerriiaall NNuummbbeerr:: ______________________________________________

S

Seerrvviiccee LLeevveell:: ________________________________________________

2 in. (5.1 cm)
from each side

8.75 in.

(22.2 cm)

Option Activation Keys (on Paper)

P.N. 90970002 Revision E

Slide the left rail
into the rail
bracket.

Slide

the right
rail into the
rail bracket
on the right
shelf piece.

Use two screws to attach the brackets
on the front of the library to the front of
the rack.

Attach the left rail bracket to the left
side of the rack with four screws.

Attach the right rail bracket to the
right side of the rack with four screws.

For Assistance,

Contact Support

U.S. and Canada:
Phone: [phone]
E-Mail: [e-mail]

Mexico, Central America,
South America, Asia, Australia,
and New Zealand:
Phone: [phone]
E-Mail: [e-mail]

Europe, Middle East, and Africa:
Business Hours: [phone]
After Hours: [phone]
E-Mail: [e-mail]

Note on After-Hours Service:

Only customers with valid
around-the-clock telephone
service contracts receive
after-hours assistance.

Cabling : SCSI

Preparing the Library for Operation

Initial Configuration

Importing TeraPack Magazines

6

Select the
GGeenneerraall

menu.

Then select
IImmppoorrtt//EExxppoorrtt

.

Insert TeraPack
magazines as
shown, with the
opening outward.

Powering Off the Library and Host

Power off
the library.

Power off the host.

Cabling : Fibre Channel

7

or

Drive 1

Drive 2
(if installed)

1 Full-Height Drive or 1 Half-Height Drive 2 Full-Height or 2-4 Half-Height Drives

Daisy-Chaining

2 Full-Height or 2-4 Half-Height Drives

9

Type

ssuu
in the
User field,
then
select
LLooggiinn

.

(No
password
until one
is set.)

Power
on the
library.

Check for
visibility.

5

AAuuttoommaattiiccaallllyy ccrreeaattee aa ppaarrttiittiioonn
assigns all library resources to
one partition.

MMaannuuaallllyy ccrreeaattee aa ppaarrttiittiioonn
allows

you

to assign library

resources to the partition.

For more information on
partitioning, see the

Spectra T50 Library User
Guide

, available online at

www.SpectraLogic.com.

If you have a
CCooDD
aaccttiivvaattiioonn
kkeeyy
(shipped
with your
library),
enter it here.
Otherwise,
select

SSkkiipp

.

Power on the host.

8

Cabling : iSCSI

or

Select

MMeennuu >> CCoonnffiigguurraattiioonn

>> OOppttiioonn KKeeyyss

.

Type in the
SSeerrvviiccee KKeeyy
(shipped
with your
library).

In the
Option Keys
screen,
select

NNeeww

.

Install device drivers.
Go to

wwwwww..SSppeeccttrraaLLooggiicc..ccoomm

>> SSuuppppoorrtt
>> FFiirrmmwwaarree && DDrriivveerrss

su