Spectralink S500 A8 1G9 User Manual
Technical Guide – KIRK Wireless Server 500 1G9
How to Register a MASTER Handset:
When turning on the KIRK Wireless Server 500 1G9, it will automatically go into registration mode for a period of 15 min. In this period you can register the MASTER
handset (it’s only possible to login 1 MASTER on each system. The first handset is
automatically the MASTER handset).
It is now possible to register the first handset (it will automatically be configured to
channel 00).
1. Press the
menu key.
2. Press the
< key
twice
3. The menu will now show
”LOGIN ”
4. Press the
key
– the menu will show
”Select login ”
5. Press the
> key
once – then press- the menu will now
show:
Subscription search ID:
The handset will start searching for ”your” KIRK Wireless Server 500. When the
handset finds a system, a number will appear in the display.
The handset might detect more than one number
(This only happens if the handset
detects another system nearby. It does not mean that your- or the other system
communicates! There are no safety problems attached to this indication)
If the handset detects more than one system, a black triangle will appear in the bottom of the display, indicating that you can press the
< key
or the
> key.
It is now possible to scroll between the numbers in the display by pressing the
< or
the >key.
It is important that the number shown in the display is identical to the number which
you find on your KIRK Wireless Server 500. The number is indicated as an ARI (indicated on the label on the back of the base station).
When you are certain to have indicated the correct number, press the
key
and the
handset will be configured as the MASTER handset of the system.
Now you have to allocate an extension number to the handset:
You can now enter the Serial Number of the new handset (found inside the handset )
1. Press the
”menu”
key.
2. Press the
>
key once.
3. The menu must now show
”EXT. Service”
4. Press the
key. The menu will now show
” Clip Stack ”
5. Press the < key twice
”Read/Write userdata
” appears in the dis-
play
.
6. Then press the
key
.
The Serial Number of the MASTER handset will now show in the display.
Press the
key.
Right after this has been done, the handset will ask for an extension number. Simply
enter the extension number already used by the user of the handset
(Can be the ” old ” extension number used on the corded phone. Or alternatively any
number available in the PABX, in the case the DECT handset is the only phone used
by the user ).
Right after this, the handset will have to be turned off and then on again. In the display ”system 500” will show.
Referring to this handset as ”MASTER” means that you can configure more handsets on the system by use of this handset.
Registering
Additional Handsets via Master Handset
It is now possible to register additional handsets via your MASTER handset.
If you want to register a handset, the MASTER handset must ”allow” you to do so.
1. Press the
”menu”
key.
2. Press the
>
key once.
3. The menu must now show
”EXT. Service”
4. Press the
key The menu will now show
” Clip Stack ”
5. Press the
<
key twice
”Read/Write userdata
” appears in the dis-
play.
6. Then press the
key
.
The Serial Number of the MASTER handset will now show in the display.
If you press the
> key
, you will have 7 additional positions (channel 01 – 07) to
which you can configure handsets.
If the position is empty, the display will show the following
” _________________”
You can now enter the Serial Number of the new handset (found inside the handset
on the label under the battery). Key in the number in the line ”_______________”
shown in the display followed by pressing the key.
Right after this has been done, the handset will ask for an extension number. Simply
enter the extension number. Then press the key (can be the ”old” extension number used on the corded phone. Or alternatively any number available in the PABX).
The MASTER handset has now ” allowed ” the system to register the new handset to
the system. You can now register the handset following the procedure used when
registering the MASTER handset.
By pressing
<
once you will return to the registration menu.
More handsets can be registered following the same procedure.
How to Delete a Registered Handset:
Enter the menu ”
EXT.Service”.
The menu is called
”Delete_user_info”
When choosing this menu, you will see the same menu structure as above.
Instead you choose the Serial Number to be deleted and press the
key.
How to Register a Repeater:
If you want to expand the coverage area of the system, this is done by adding
Repeaters to the system. As indicated by the name, it adds a larger area to the already existing coverage area.
Please note! It does not add capacity, ie. more channels, but only a larger coverage
area! Also please note, that the Repeater can only be registered into the system
when placed within the coverage area of the Base Station ( Please read the
Repeater deployment note on the CD-ROM for further information on different types
of Repeaters).
In general terms, KIRK Wireless Server 500 1G9 contains 6 available speech channels in the coverage area of the base station.
There are 2 simultaneous speech channels in the coverage area of each Repeater.
These 2 channels are ”borrowed” from the base station, and are not an addition to
the system’s 6 channels.
Each handset uses one channel when making a call – internal or external. Thus, in
total 6 handsets can be in use at the same time.
Loading...