Regulatory Guide
Link 3000 Master Control Unit (MCU)
Link 150 M3 Master Control Unit (MCU)
NetLink 150 Telephony Gateway
SpectraLink Open Applications Interface (OAI) Gateway
72-1402-00-A
Regulatory Guide SpectraLink Corporation
Notice
SpectraLink Corporation has prepared this document for use by SpectraLink personnel and customers.
The drawings and specifications contained herein are the property of SpectraLink and shall be neither
reproduced in whole or in part without the prior written approval of SpectraLink, nor be implied to
grant any license to make, use, or sell equipment manufactured in accordance herewith.
SpectraLink reserves the right to make changes in specifications and other information contained in this
document without prior notice, and the reader should in all cases consult SpectraLink to determine
whether any such changes have been made.
The terms and conditions governing the sale of SpectraLink hardware products and the licensing of
SpectraLink software consist solely of those set forth in the written contracts between SpectraLink and
its customers. No representation or other affirmation of fact contained in this document including but
not limited to statements regarding capacity, response-time performance, suitability for use, or
performance of products described herein shall be deemed to be a warranty by SpectraLink for any
purpose, or give rise to any liability of SpectraLink whatsoever.
In no event shall SpectraLink be liable for any incidental, indirect, special, or consequential damages
whatsoever (including but not limited to lost profits) arising out of or related to this document, or the
information contained in it, even if SpectraLink has been advised, knew, or should have known of the
possibility of such damages.
Trademark Information
SpectraLink®
LinkPlus
Link
NetLink
SVP
Are trademarks and registered trademarks of SpectraLink Corporation.
The SpectraLink logo is a registered trademark in the United States of America and in other
countries.
All other trademarks used herein are the property of their respective owners.
SpectraLink Corporation
5755 Central Avenue
Boulder, CO 80301
303 440 5330 or
800 676 5465
www.spectralink.com
Copyright © 2007 SpectraLink Corporation. All rights reserved
Information in this document is subject to change without notice and does not represent a commitment
on the part of SpectraLink Corporation. The software described in this document is furnished under a
license and may only be used pursuant to the terms of (1) SpectraLink's software license agreement
available at http://www.spectralink.com/softwareUpdates
OR (2) the terms and conditions previously
agreed to in writing between the user and SpectraLink Corporation OR (3) the terms and conditions
previously agreed to in writing between the user and an authorized SpectraLink reseller (each, the
“Agreement”). The software may be used only in accordance with the terms of the Agreement. No part
of this manual, or the software described herein, may be reproduced or transmitted in any form or by
any means, electronic or mechanical, including photocopying and recording, for any purpose except for
the sole intent to operate the product or without the express written permission of SpectraLink
Corporation.
Page 2 PN: 72-1402-00-A.doc
SpectraLink Corporation Regulatory Guide
Introduction
The Link150 M3 MCU, Link 3000 MCU, OAI Gateway and NetLink Telephony Gateway are stateof-the-art networking and communication devices that utilize radio wave technology to send and
receive voice transmissions.
Registered Model Numbers
This document covers these components:
Link 3000 MCU MCS300
Link 150 M3 MCU SCA416
NetLink 150 Telephony Gateway TGA116
SpectraLink OAI Gateway MOG500, MOG600, MOG7xx
TUV Rheinland of North America is a Nationally Recognized Testing Laboratory
(NRTL) in the United States and is accredited by the Standards Council of Canada to
test and certify products to Canadian National Standards. Clients can demonstrate
compliance for both U.S. and Canadian markets through a single mark (cTUVus) on
their product(s) which denotes compliance to U.S. and Canadian National Standards.
WARNING: Changes or modifications to this equipment not approved by
SpectraLink Corporation may cause this equipment to not comply with part 15 of the
FCC rules and void the user’s authority to operate this equipment.
WARNING: SpectraLink products contain no user-serviceable parts inside. Refer
servicing to qualified service personnel.
Please visit Spectralink.com to view regulatory declarations.
Note concerning shielded cable
SpectraLink recommends the use of shielded cable for all external signal connections
in order to maintain FCC Part 15 emissions requirements.
Made in the USA.
Warranty and Repair Service Center
If you experience trouble with this telephone equipment, please contact SpectraLink Corporation for
information on obtaining service or repairs.
SpectraLink Corporation
5755 Central Avenue
Boulder, CO 80301
303-440-5330
PN: 72-1402-00-A.doc Page 3
Regulatory Guide SpectraLink Corporation
FCC Certification
Link 3000 MCU
MCS300: IYGUSA-33400-PX-E
Ringer Equivalence: 0.3B
Link 150 M3 MCU
SCA416: IYGUSA-33816-PX-E
Ringer Equivalence: 0.3B
NetLink 150 Telephony Gateway
TGA116: IYGUSA-33816-PX-E
Ringer Equivalence 0.3B
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
This equipment complies with Part 68 of the FCC Rules. On the back of this equipment is a label that
contains, among other information, the FCC Registration Number and Ringer Equivalence Number
(REN) for this equipment. If requested, this information must be given to the telephone company.
This equipment uses RJ-21 connectors.
The REN is useful to determine the quantity of devices you may connect to your telephone line and still
have all of those devices ring when your number is called. In most, but not all, areas, the sum of the
RENs of all devices connected to one line should not exceed five (5.0). To be certain of the number of
devices you may connect to your line, as determined by the REN, you should contact your local
telephone company to determine the maximum REN for your calling area.
If your telephone equipment causes harm to the telephone network, the telephone service may
discontinue your service temporarily. If possible, they will notify you in advance. But if advance notice
isn’t practical, you will be notified as soon as possible. You will be informed of your right to file a
complaint with the FCC.
The telephone company may ask that you disconnect this equipment from the network until the
problem has been corrected or until you are sure that the equipment is not malfunctioning. There are no
user serviceable parts in this equipment.
This equipment may not be used on coin service provided by the telephone company. Connection to
party lines is subject to state tariffs.
SpectraLink OAI Gateway
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Page 4 PN: 72-1402-00-A.doc
SpectraLink Corporation Regulatory Guide
Industry Canada (IC) Notice
Link 3000 MCU
MCS300 Certification number IC: 2128-9508 A
REN: 0.3B
Link 150 M3 MCU
SCA416 Certification number IC: 2128-9760 A
REN: 0.3B
NetLink 150 Telephony Gateway
TGA116 Certification number IC: 2128-9760 A
REN: 0.3B
The Industry Canada (IC) label identifies certified equipment. This certification means that the
equipment meets telecommunications network protective, operational, and safety requirements as
prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The
department does not guarantee the equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier.
Any repairs or alterations made by a user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility,
telephone lines and internal metallic water pipe system, if present, are connected together. This
precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should contact the
appropriate electric inspection authority, or electrician, as appropriate.
Notice: The Ringer Equivalence Number (REN) assigned to each terminal device provides as indication
of the maximum number of terminals allowed to be connected to a telephone interface. The
termination of an interface may consist of any combination of devices.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 due Canada.
SpectraLink OAI Gateway
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 due Canada.
PN: 72-1402-00-A.doc Page 5
Regulatory Guide SpectraLink Corporation
European Union Directives Conformance Statement
NetLink 150 Telephony Gateway
Hereby, SpectraLink Corporation declares that the NetLink 150 Telephony Gateway is in compliance
with:
• EMC Directive 2004/108/EC
• LVD Directive 2006/95/EC
• R&TTE Directive 1999/5/EEC
• Restriction of Hazardous Substances (RoHS) 2002/95/EC
• Waste Electrical and Electronic Equipment (WEEE) 2002/96/EC
Please visit http://www.spectralink.com/consumer/resources/compliance.jsp to view the Declaration
of Conformity as allowed by the European Commission Interpretation of Directive 1999/5/EC.
For more information, please visit http://europa.eu.int/comm/enterprise/rtte/tcam5.htm#tcam5.
Note concerning the power adapter for the NetLink Telephony Gateway
The power adapter must have the capacity to connect to the country AC power mains
with the proper AC power plug.
The power adapter shall have an output voltage of 24V DC +/-5% with a current
rating of at least 1.0 Amp and rated at least 33 watts.
The DC plug shall adhere to the following dimensions 5.5 x 2.1 x 8mm. The plug
length shall be 11mm +/- 1.0mm. The barrel outer diameter shall be 5.5mm +/-
0.1mm. The inner barrel diameter shall be 2.1mm +/-0.1mm and shall be positive in
voltage.
Page 6 PN: 72-1402-00-A.doc
SpectraLink Corporation Regulatory Guide
Notes:
PN: 72-1402-00-A.doc Page 7
72-1402-00-A.doc
Loading...