Spectralink K022A, K022B Users Manual

14226300.fm Page 1 Wednesday, April 29, 2015 2:09 PM

Spectralink

7522/7532

Handsets

The User Guides for the handsets
are available for download at:
www.spectralink.com

Safety and Regulatory Instructions

The handset has been marked with
the CE mark. This mark indicates
compliance with EEC Directive
1999/5/EC. The handset also
complies with EEC directives 2006/
95/EC LV, 2004/108/ED EMC and
201 1/65 EC (RoHS II). A full copy of
the Declaration of Conformity can
be obtained from Spectralink
Europe ApS, Langmarksvej 34,
8700 Horsens, Denmark.

K022

14226300.fm Page 2 Wednesday, April 29, 2015 2:09 PM

The WEEE Marking on this
equipment indicates that the
product must not be disposed of
with unsorted waste, but must be
collected separately.

Visit www.spectralink.com/

ery-recycling for further

batt
guidance on battery recycling.

Important Safety Instructions

Before using your telephone
equipment, you should always
follow basic safety instruction to
reduce the risk of fire, electrical
shock and injury to persons, and
damage to property.

• Read and understand all
i

nstructions.

• Follow all warnings and

ctions including those

instru
marked on the product.

• Unplug this product before

ing. Do not use liquid

clean
cleaners or aerosol cleaners.
Use damp cloth for cleaning.

• Do not install the telephone
eq

uipment in the bathroom or

near a wash bowl, kitchen sink,

2

14226300.fm Page 3 Wednesday, April 29, 2015 2:09 PM

or laundry tub, in a wet
basement, or near a swimming
pool.

• Slots or openings in the
equipment are provided for
ventilation to protect it from
overheating. These openings
must not be blocked or
covered.

• The product should be
operated only from the type of
power source indicated on the
instructions. If you are not sure
of the type of power supply,
consult your dealer or local
power company.

• Do not overload wall outlets
and extension cords as this
can result in fire or electrical
shock.

• Never push objects of any kind
into this product through
cabinet slots as they may
touch dangerous voltage
points or short out parts that
could result in fire, electrical
shock, or injury. Never spill
liquid of any kind into this
product.

• To reduce the risk of electrical
shock or burns, do not
disassemble this product.

3

14226300.fm Page 4 Wednesday, April 29, 2015 2:09 PM

Opening or removing covers
may expose you to dangerous
voltages, dangerous electrical
current, or other risks.
Incorrect reassemble can
cause electrical shock when
the appliance is subsequently
used. If the product need
repair, consult your dealer.

• Refer servicing to qualified
service personnel.

• Avoid using telephone during
an electrical storm. There may
be a risk of electrical shock
from lightning.

• Do not use the telephone to
report a gas leak in the vicinity
of the leak.

• Do not place the base or
charger near microwave
ovens, radio equipment, or
non-ground connected
televisions. These appliances
may cause electrical
interference to the base or
handset.

• The charger must be placed on
a hard, flat surface and
connected to a functional
power source depending on
the country of use.

4

14226300.fm Page 5 Wednesday, April 29, 2015 2:09 PM

• This telephone will not operate
in the event of a blackout.
Please keep a backup phone
for emergencies.

• Installation must be performed
in accordance with all relevant
national wiring rules.

• Plug acts as Disconnect
Device - The socket outlet to
which this apparatus is
connected must be installed
near the equipment and must
always be readily accessible.

• This device and its antenna
must not be co-located or
operating in conjunction with
any other antenna or
transmitter.

• Warning: The earpiece and
loudspeaker region on the
handset can attract and retain
small metallic objects.

Intrinsic safety

Do not use the handset in
conditions where there is a danger
of electrically ignited explosions.

5

14226300.fm Page 6 Wednesday, April 29, 2015 2:09 PM

Exposure to sunlight, heat and
moisture

Do not expose the wireless phone
to direct sunlight for long periods.
Keep the wireless phone away
from excessive heat and moisture.

Spare parts and accessories

Use only approved spare parts and
accessories. The operation of non­approved parts cannot be
guaranteed and may even cause
damage.

Power failure

In the event of a power failure or
flat battery, you cannot use the
handset to make or receive calls.

Battery Precautions

• Periodically clean the charge
contacts on both the charger
and handset.

• Exercise care in handling
batteries in order not to short
the batteries with conducting
materials such as rings,
bracelets, and keys. The
batteries or conducting
material may overheat and
cause burns or fire.

6

14226300.fm Page 7 Wednesday, April 29, 2015 2:09 PM

• Do not open or mutilate the
batteries. Released electrolyte
is corrosive and may cause
damage to the eyes or skin.
The electrolyte may be toxic if
swallowed.

• During charging batteries heat
up. This is normal and not
dangerous.

• Lithium cell installation Caution

- Danger of Explosion if Battery
is incorrectly replaced.
Replace only with the same or
equivalent type recommended
by the manufacturer. Dispose
of used batteries according to
the manufacturer’s
instructions.

Notices

Before installing this equipment,
users should ensure that it is
permissible to be connected to the
facilities of the local
telecommunications company.
The equipment must also be
installed using an acceptable
method of connection. The
customer should be aware that
compliance with the above
conditions may not prevent
degradation of service in some
situations.



7

14226300.fm Page 8 Wednesday, April 29, 2015 2:09 PM

Repairs to certified equipment
should be coordinated by a
representative designated by the
supplier. Any rep airs or alterations
made by the user to this
equipment, or equipment
malfunctions, may give the
telecommunications company
cause to request the user to
disconnect the equipment.



Users should ensure for their own
protection that the electrical
ground connections of the power
utility, telephone lines and internal
metallic water pipe system, if
present, are connected together.
This precaution may be particularly
important in rural areas.

EMC CAUTIONS:

Users should not attempt to make
such connections themselves, but
should contact the appropriate
electric inspection authority, or
electrician, as appropriate.
If your telephone equipment
causes harm to the telephone
network, the telephone company
may ask you to disconnect the
system from the line until the
problem has been corrected or
they may discontinue your service
temporarily. If possible, they will
notify you in advance, but if

8



14226300.fm Page 9 Wednesday, April 29, 2015 2:09 PM

advance notice is not practical, you
should be notified as soon as
possible. You will be informed of
your right to file a complaint with
the FCC.



Your telephone company may
make changes in its facilities,
equipment, operations, or
procedures that could affect the
proper functioning of your
telephone system, If they do and it
is possible, you will be notified in
advance to give you an opportunity
to maintain uninterrupted
telephone service. If you
experience trouble with this
telephone system, disconnect it
from the network until the problem
has been corrected or until you are
sure that the equipment is not
malfunctioning.

Note:

This equipment has been tested
and found to comply with the limits
for a class B digital device,
pursuant to local regulations.
These limits are designed to
provide reasonable protection
against harmful interference in a
residential installation. This
equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in

9

14226300.fm Page 10 Wednesday, April 29, 2015 2:09 PM

accordance with the instructions,
may cause harmful interference to
radio communications. However,
there is no guarantee that
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be
determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:

• Reorient or relocate the
receiving antenna.

• Increase the separation
between the equipment and
receiver.

• Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.

• Consult the dealer or an
experienced radio/TV
technician for help.

FCC Note

This device complies with part 15
of the FCC rules. Operation is
subject to the following two
conditions: (1) This device may not

10