Spectralink DECT Repeater
Safety and Handling Information
14099100-IG, Edition 3.0
December 2018, Original document
Copyright Notice
© 2017 - 2018 Spectralink Corporation All rights reserved. SpectralinkTM, the Spectralink logo and
the names and marks associated with Spectralink’s products are trademarksand/or service marks of
Spectralink Corporation and are common law marks in the United States and various other countries. All other trademarks are property of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, for any purpose other than the recipient’s
personal use, without the express written permission of Spectralink.
All rights reserved under the International and pan-AmericanCopyright Conventions. No part of this
manual, or the software described herein, may be reproduced or transmitted in any form or by any
means, or translated into another language or format, in whole or in part, without the express written
permission of Spectralink Corporation.
Do not remove (or allow any third party to remove) any product identification, copyright or other
notices.
Notice
Spectralink Corporation has prepared this document for use by Spectralinkpersonnel and customers. The drawings and specifications contained herein are the property of Spectralink and shall
be neither reproduced in whole or in part without the prior written approval of Spectralink, nor be
implied to grant any license to make, use, or sell equipment manufactured in accordance herewith.
Spectralink reserves the right to make changes in specifications and other information contained in
this document without prior notice, and the reader should in all cases consult Spectralinkto determine whether any such changes have been made.
NO REPRESENTATION OR OTHER AFFIRMATION OF FACT CONTAINED IN THIS
DOCUMENT INCLUDING BUT NOT LIMITED TO STATEMENTS REGARDING CAPACITY,
RESPONSE-TIME PERFORMANCE, SUITABILITY FOR USE, OR PERFORMANCE OF
PRODUCTS DESCRIBED HEREIN SHALL BE DEEMED TO BE A WARRANTY BY
SPECTRALINK FOR ANY PURPOSE, OR GIVE RISE TO ANY LIABILITY OF SPECTRALINK
WHATSOEVER.
Warranty
The Product Warranty and Software License and Warranty and other support documents are available at http://support.spectralink.com/.
Contact Information
US Location
+ 1 800-775-5330
Spectralink Corporation
2560 55th Street
Boulder, CO 80301
USA
info@spectralink.com
UK Location
+44 134 4206 591
Spectralink Europe UK
329 Bracknell, Doncastle Road
Bracknell, Berkshire, RG12 8PE
United Kingdom
infoemea@spectralink.com
Denmark Location
+45 75602850
Spectralink Europe ApS
BygholmSøpark 21 E Stuen
8700 Horsens
Denmark
infoemea@spectralink.com
Contents
About This Guide 4
Model Numbers Covered by this Guide 4
Spectralink DECT Repeater: 4
Spectralink References 4
To Go to a Specific Product Page 5
Safety Information 6
Product Compatibility 6
Explosive Device Proximity Warning 9
Appropriate RF Safety/Installation Information 10
Note: 10
Warning - Qualified Personnel 10
Important Safety Instructions 11
Intrinsic safety 12
Exposure to sunlight, heat and moisture 12
Spare parts and accessories 12
RF compliance information 12
14099100-IG, Edition 3.0
December 2018, Original document
SpectralinkDECT Repeater Safety and Handling Information
About This Guide
This guide explains how to use your device safely.
Model Numbers Covered by this Guide
Spectralink DECT Repeater:
K018, K018B, K018C
Spectralink References
All Spectralink documents are available at http://support.spectralink.com/products.
Regulatory information is available online at http://support.spectralink.com/products.
14099100-IG, Edition 3.0
December 2018, Original document
4
SpectralinkDECT Repeater Safety and Handling Information
To Go to a Specific Product Page
1. Under Product Resources, select the Product Category and Product Type from the lists,
and then click Find.
2. Under Documents & Downloads, click the relevant product from the list.
3. All resources for that particular product are displayed by default under the All tab.
Documents, downloads and other resources are sorted by the date they were created so the
most recently created resource is at the top of the list.
You can further sort the list by the tabs across the top of the list to find exactly what you are
looking for.
4. Click the title to open the link.
14099100-IG, Edition 3.0
December 2018, Original document
5
Spectralink DECT Repeater
Spectralink DECT Repeater 1G8, 2 channels, with
connector for external antenna
K018B (02440000)
Spectralink DECT Repeater 1G9, 2 channels, with
connector for external antenna
K018B (02441000)
Spectralink DECT Repeater 1G8, 2 channels,
without connector for external antenna
K018 (02441100)
Spectralink DECT Repeater 1G9, 2 channels,
without connector for external antenna
K018 (02441200)
Spectralink DECT Repeater 1G8, 4 channels, with
connector for external antenna
K018 (02441600)
Spectralink DECT Repeater 1G9, 4 channels, with
connector for external antenna
K018 (02440200)
Spectralink DECT Repeater 1G8, 4 channels,
without connector for external antenna
K018C (02334601)
External Antenna (with 1 m connection cable) 02319507
Connection cable for External Antenna, 7.5 m 14002706
Power Supply (9.0V DC, 350mA) 84642602
Repeater Programming Kit 02509210
SpectralinkDECT Repeater Safety and Handling Information
Safety Information
Product Compatibility
If you have any questions about product compatibility, contact your system administrator.
You can use the SpectralinkDECT Repeater with other Spectralink products as identified by the
type approval model ID and/or part number located on the label of the product.
14099100-IG, Edition 3.0
December 2018, Original document
6
Spectralink Base Station
Spectralink IP-DECT Base Station 1G8 K005
Spectralink IP-DECT Base Station 1G9 K005
Spectralink Digital DECT Base Station 4 channels K007
Spectralink Digital DECT Base Station 8 channels K007
Power Supply, 8.0V DC (only SpectralinkIP-DECT
Base Station)
84642600
External Antenna (with 1 m connection cable) 02319507
Connection cable for External Antenna, 7.5 m 14002706
Spectralink Server
Spectralink IP-DECT Server 200 K005 (72345600 / 72345601)
Spectralink IP-DECT Server 400 K005 (02344500 / 02344501)
Spectralink IP-DECT Server 6500 K006 (02350000)
Spectralink DECT Server 2500 K017 (0270xxxx)
Spectralink DECT Server 8000 K016 (023389xx)
Power Supply, 8.0V DC (only Server 200 and
Server 400)
84642600
External Antenna (with 1 m connection cable) (only
Server 200 and Server 400)
02319507
Connection cable for External Antenna, 7.5 m (only
Server 200 and Server 400)
14002706
Power Supply, 19.0V (only Server 2500) 84769905
Power Supply, 19.0V (only Server 8000) 84769902
Cable for Power Supply: AU version 84687011
Cable for Power Supply: DK version 84687012
Cable for Power Supply: EU version 84687013
Cable for Power Supply: UK version 84687014
SpectralinkDECT Repeater Safety and Handling Information
14099100-IG, Edition 3.0
December 2018, Original document
7
Spectralink DECTMedia Resource
Spectralink DECTMedia Resource (only Server
6500)
K006
SpectralinkDECT Repeater Safety and Handling Information
14099100-IG, Edition 3.0
December 2018, Original document
8
SpectralinkDECT Repeater Safety and Handling Information
Explosive Device Proximity Warning
Warning:
Do not operate your wireless network device near unshielded blasting caps or in an explosive
environment unless the device has been modified to be especially qualified for such use.
Waarschuwing
Gebruik dit draadloos netwerkapparaat alleen in de buurt van onbeschermde ontstekers of in een
omgeving met explosieven indien het apparaat speciaal is aangepast om aan de eisen voor een
dergelijk gebruik te voldoen.
Varoitus
Älä käytä johdotonta verkkolaitetta suojaamattomien räjäytysnallien läheisyydessä tai
räjäytysalueella, jos laitetta ei ole erityisesti muunnettu sopivaksi sellaiseen käyttöön.oen.
Attention
Ne jamais utiliser un équipement de réseau sans fil à proximité d'un détonateur non blindé ou
dans un lieu présentant des risques d'explosion, sauf si l'équipement a été modifié à cet effet.
Warnung
Benutzen Sie Ihr drahtloses Netzwerkgerät nicht in der Nähe ungeschützter Sprengkapseln oder
anderer explosiver Stoffe, es sei denn, Ihr Gerät wurde eigens für diesen Gebrauch modifiziert und
bestimmt.
Avvertenza
Non utilizzare la periferica di rete senza fili in prossimità di un detonatore non protetto o di esplosivi a meno che la periferica non sia stata modificata a tale proposito.
Advarsel
Ikke bruk den trådløse nettverksenheten nært inntil uisolerte fenghetter eller i et eksplosivt miljø
med mindre enheten er modifisert slik at den tåler slik bruk.
Aviso
Não opere o dispositivo de rede sem fios perto de cápsulas explosivas não protegidas ou num
ambiente explosivo, a não ser que o dispositivo tenha sido modificado para se qualificar especialmente para essa utilização.
¡Advertencia!
No utilizar un aparato de la red sin cable cerca de un detonador que no esté protegido ni tampoco
en un entorno explosivo a menos que el aparato haya sido modificado con ese fin.
Varning!
Använd inte den trådlösa nätverksenheten i närheten av oskyddade tändhattar eller i en explosiv
miljö om inte enheten modifierats för att kunna användas i sådana sammanhang.
14099100-IG, Edition 3.0
December 2018, Original document
9
SpectralinkDECT Repeater Safety and Handling Information
Appropriate RF Safety/Installation Information
The equipment is intended to be installed by authorized personal. The equipment shall be installed in
accordance with FCC rules.
The EUT is considered as a mobile device according to OET Bulletin 65, Edition - 97 - 01. Therefore
distance to human body of min. 20 cm is determined. The internal / external antennas used for this
mobile transmitter must provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or transmitter.
Note:
This equipment has been tested and found to comply with the limitsfor a class B digital device, pursuant to local regulations. These limitsare designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, usesand can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
l Reorient or relocate the receiving antenna.
l Increase the separation between the equipment and receiver.
l Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected.
l Consult the dealer or an experienced radio/TV technician for help.
Warning - Qualified Personnel
l Only qualified service personnel may install this equipment. The instructions in this manual are
intended for use by qualified service personnel only.
l The installation and service of this hardware is to be performed only by servicepersonnel hav-
ing appropriate training and experience necessary to be aware of hazards to which they are
exposed in performing a task and of measuresto minimize the danger to themselves or other
persons.
l Electrical shock hazards from the telecommunication network and AC mains are possible with
this equipment. To minimize risk to service personnel and users, the system must be connected to an outlet with a third-wire Earth.
l Service personnel must be alert to the possibility of high leakage currents becoming available
on metal systemsurfaces during power line fault events near network lines. These leakage
currents normally safely flow to ProtectiveEarth via the power cord. Therefore, it is mandatory
that connection to an earthed outlet is performed first and removed last when cabling to the
unit. Specifically, operations requiring the unit to be powered down must have the network connections (exchange lines) removed first.
14099100-IG, Edition 3.0
December 2018, Original document
10
SpectralinkDECT Repeater Safety and Handling Information
Important Safety Instructions
Before using your telephone equipment, you should always follow basic safetyinstruction to reduce
the risk of fire, electrical shock and injury to persons, and damage to property.
l Read and understand all instructions.
l Follow all warnings and instructions including those marked on the product.
l Unplug this product before cleaning. Do not use liquid cleaners or aerosol cleaners. Use damp
cloth for cleaning.
l Do not install the telephone equipment in the bathroom or near a wash bowl, kitchen sink, or
laundrytub, in a wet basement, or near a swimming pool.
l Slots or openings in the equipment are provided for ventilation to protect it from overheating.
These openings must not be blocked or covered.
l The equipment should be operated only from the type of power source indicated on the instruc-
tions. If you are not sure of the type of power supply, consult your dealer or local power company.
l Do not overload wall outlets and extension cords as this can result in fire or electrical shock.
l Never push objects of any kind into this product through cabinet slots as they may touch dan-
gerous voltage points or short out parts that could result in fire, electrical shock, or injury.
Never spill liquid of any kind into this product.
l To reduce the risk of electrical shock or burns, do not disassemble this product. Opening or
removing covers may expose you to dangerous voltages, dangerouselectrical current, or
other risks. Incorrect reassemble can cause electrical shock when the appliance is subsequently used. If the product need repair, consult your dealer.
l This equipment does not support connections to outside plant.
l Refer servicing to qualified service personnel under the following conditions:
l If liquid has been spilled into the product.
l If the product has been exposed to rain or water.
l If the product does not operate normallywhen following the operating instructions in the
manual. Adjust only those controls that are covered by the operation instructions. Improper
adjustment of other controlsmay result in damage and will often require extensive work by
qualified service personnel to restore the product to normal operation.
l If the product has been dropped or cabinet has been damaged.
l If the product exhibits a distinct change in performance.
WARNING
l Avoid using telephone during an electrical storm. There may be a risk of electrical shockfrom
lightning.
l Do not use the telephone to report a gas leak in the vicinity of the leak.
l Do not place the device near microwave ovens, radio equipment, or non-ground connected
televisions. These appliances may cause electrical interference to the base station or handset.
14099100-IG, Edition 3.0
December 2018, Original document
11
SpectralinkDECT Repeater Safety and Handling Information
l The unit must be installed on a hard, plane surface and connected to a functional 120 volt AC
power net adapter, that must be plugged into the power outlet.
l Installation must be performed in accordance with all relevant national wiring rules.
l Plug acts as Disconnect Device - The socket outlet to which this apparatus is connected must
be installed near the equipment and must always be readily accessible.
l The system will not operate in the event of a blackout. Please keep a backup phone for emer-
gencies.
Intrinsic safety
Do not install the device in conditions where there is a danger of electrically ignited explosions.
Exposure to sunlight, heat and moisture
Do not expose the deviceto direct sunlight for long periods. Keep away from excessive heat and
moisture.
Spare parts and accessories
Use only approved spare parts and accessories. The operation of non- approved parts cannot be
guaranteed and may even cause damage.
RF compliance information
The user manual or instruction manual for an intentional or unintentional radiator shall caution the
user that changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
14099100-IG, Edition 3.0
December 2018, Original document
12
Loading...