Spectech T310 User Manual

WARNING

Please read and follow all of the instructions & safety precautions detailed below prior to using this product. Failure

to do so may result in serious personal injury and / or property damage.

Safety Precautions

 Do not expose this product to heat sources (including open flame or direct sunlight)
 Do not expose this product to water or liquids. If liquid enters the product, immediately unplug the product

from any connected power sources or devices.

 Do not disassemble or modify the product
 Avoid dropping this product (or any other heavy impact which might damage the internal circuit)
 In the unlikely event of any abnormalities (such as strange odor, overheating, leaking, color change, etc.),

discontinue use immediately.

 Avoid cleaning this product using liquids or chemical substances (use dry cloth only)
 Only use attachments/accessories specified by the manufacturer
 Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt to incinerate it)
 Do not leave this product unattended while it is in use or while it is being charged
 This product is not a toy: KEEP AWAY FROM CHILDREN

 Only re-charge this device using a USB port wall adapter with (not included)
 Do not re-charge via USB port on a computer

 Do not use this product while it is being charged
 When not being used for prolonged periods of time please charge every 3 months to avoid damaging the

battery

T310 USER MANUAL

The T310 Wireless V4.1 earbuds are the ideal on-the-go audio companion. They are comfortable, well designed &
conveniently packaged in a zippered travel case. Please read below product specifications and user guide:

Specifications:

Battery Type: Grad A non-recycled Lithium polymer battery
Battery Duration/Lifespan: 300 times
Capacity: 120 mAh
Power Input & Current: DC 5V/100 mAh
Sound Output: 3MW x 2 speakers
Sensitivity: 94 +/- dB
Frequency Response: 20Hz - 20KHz
Distortion Rate: ＜10% @ 1kHz
Wireless Version: 4.1
Range of Wireless Communication: 10 meters
Charge Time (0-100%): 2 hours
Playback Time: 7.5 hours
Accessories: Micro USB charging cable
Product Size: 4¼” x 2¼” x 1¾”
Net Weight: 53g

T310 Product Map

T310 Operation

1. On: press & hold the button for 4 seconds until the LED flashes BLUE (LED will flash blue every 5
seconds to indicate the T310 is ON). Headset is now in STANDBY mode.

NOTE: previously paired devices will automatically connect to the T310 headphones when turned on

2. Press and buttons simultaneously while in standby mode to hear the remaining battery power
percentage (English voice prompt)

3. Off: press & hold the for 4 seconds until the LED light flashes RED

NOTE: T310 will power off automatically after 10 minutes if not used in standby mode

T310 Wireless Pairing

1. Pairing: Make sure T310 is OFF. Press & hold button for 7 seconds until LED light flashes blue & red
(blue/red flashing LED indicates the device is ready for pairing)

2. Enable Bluetooth function on your electronic device. Search Spector T310 & pair the devices (blue LED
will flash once every 10 seconds when paired)

NOTE: To DISCONNECT from Bluetooth pairing, press & hold & buttons until you hear an audio prompt and
see the LED flash blue & red again.

T310 Operation in Wireless Mode

1. Answer/End calls & Play/Pause function: quickly press the button

2. Rejecting a call: press & hold the button

3. Redialing last outgoing call: in standby mode, double click

4. To answer an incoming call while already on a call, double click (double click again to return to

original call)

5. To switch call from T310 to connected phone, press & hold during a call

6. button: quick press to skip songs / press & hold to increase volume

7. button: quick press to previous song/ press & hold to decrease volume. While on a call, quick press

to mute/unmute microphone.

T310 Voice Dialing

1. Enable voice dialing feature on your connected phone

2. In standby mode, short press & simultaneously to activate voice dialing (then say whom you would like to
call)

To Charge the T310

1. Insert micro USB into the T310 & plug the USB into a wall adapter (not included)

2. Red LED indicates the device is charging (LED will turn blue once fully charged)