Spectech T230 Addi User Manual

WARNING

Please read and follow all of the instructions & safety precautions detailed below prior to using

this product. Failure to do so may result in serious personal injury and / or property damage.

Safety Precautions

 Do not expose this product to heat sources (including open flame or direct sunlight)
 Do not expose this product to water or liquids. If liquid enters the product, immediately

unplug the product from any connected power sources or devices.

 Do not disassemble or modify the product
 Avoid dropping this product (or any other heavy impact which might damage the internal

circuit)

 In the unlikely event of any abnormalities (such as strange odor, overheating, leaking,

color change, etc.), discontinue use immediately.

 Avoid cleaning this product using liquids or chemical substances (use dry cloth only)
 Only use attachments/accessories specified by the manufacturer
 Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt

to incinerate it)

 Do not leave this product unattended while it is in use or while it is being charged
 This product is not a toy: KEEP AWAY FROM CHILDREN

 Only re-charge this device using a USB port wall adapter (not included)
 Do not re-charge via USB port on a computer

 Do not use this product while it is being charged
 When not being used for prolonged periods of time please charge every 3 months to

avoid damaging the battery

T230 ADDI USER MANUAL

The T230 Addi speaker is a powerful, quality Bluetooth V4.1 CSR speaker. Please read
product specifications and user guide below.

T230 Addi Specifications

Battery Type: Lithium Polymer
Battery Duration/Lifespan: 300 times
Capacity: 520 mAh
Power Input & Current: 5V/0.5A
Sound Output: 3W x 1 speaker
Sensitivity: 95 dB
Frequency Response: 20Hz - 20KHz
Distortion Rate: 0.5%
Bluetooth Version: V4.1 CSR
Range of Bluetooth Communication: 10 meters
Charge Time (0-100%): 2 hours
Playback Time: 10 hours

Accessories included: Micro or Mini USB charging cable & 3.5 mm AUX cable
Product Size: 60mm x 60mm x 50mm
Net Weight: 230g

To charge the T230

1. Insert the mini USB tip of the charging cable into the T230 & connect USB output to a

wall adapter (not included)

2. Red Led light indicates the speaker is in charging mode. Red Led will turn off when
speaker is fully charged. (charge time is approximately 2 hours)

Operation

Bluetooth Mode

1. Pairing the T230 with your audio device
a. Push the T230 on switch to the LEFT to activate the Bluetooth function (LED light will

flash blue/red to indicate the speaker is ready for pairing)

b. Turn on the Bluetooth on your audio device
c. Device name is Spector T230 (no pairing password required)
d. Blue LED light will flash once connected

** To re-activate a Bluetooth connection with a previously paired Bluetooth device, press the
button immediately when the speaker is turned on (switch button to the LEFT). Bluetooth
connection will resume.

NOTE: To disconnect Bluetooth, press & hold the button

2. Operation in Bluetooth mode
a.

Quick Press: Play next song

Long Press: Volume increase

b.
Quick Press: Play last song

Long Press: Volume decrease

c.

Music mode: Quick Press to Play/Pause
Call mode: Quick press to Answer/End a call/ Long press (hold for 2 seconds) to reject
incoming call/ Double-quick press to redial last number

NOTE:
After a call is terminated, the T230 will resume to previous working status.
Red LED light will flash to indicate low battery

AUX in Mode

1. Push the T230 on switch to the RIGHT to activate AUX mode (green LED light will

remain lit in AUX mode)

2. Connect the AUX cable to the speaker & to your audio device

3. When in AUX mode you must use your audio device to operate the speaker (play/pause

skip songs/volume control & answer/end phone calls)

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

 Consult the dealer or an experienced radio/TV technician for help.

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.