Spectech T1036, SP8186 User Manual

WARNING

Please read and follow all of the instructions & safety precautions detailed below prior to using this

product. Failure to do so may result in serious personal injury and / or property damage.

 Read all the instructions before using the product.
 Power bank main unit contains an internal lithium ion battery. Upon initial use or after a prolonged

storage period, fully charge it once. The unit’s full performance is achieved only after 2 or 3

completed charge and discharge cycles.

 Power banks are not allowed in checked luggage on commercial airline flights. Handle with care

and dispose of in accordance to local regulations. Carry-on only.

 To reduce the risk of injury, close supervision is necessary when the product is used near

children.

 Do not put fingers or hands into the product.
 Do not expose power bank to rain, snow, water or liquids.
 Use of a power supply or charger not recommended or sold with power bank manufacturer may

result in a risk of fire or injury to persons.

 Do not use the power bank in excess of its output rating. Overload outputs above rating may

result in a risk of fire or injury to persons.

 Do not use the power bank that is damaged or modified. Damaged or modified batteries may

exhibit unpredictable behavior resulting in fire, explosion or risk of injury.

 Do not disassemble the power bank. Bring unit to a qualified service person when service or

repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.

 Do not expose a power pack to fire or excessive temperature. Exposure to fire or temperature

above 100°C may cause explosion. The temperature of 100°C is equivalent to the temperature of
212°F.

 Have servicing performed by a qualified repair person using only identical replacement parts.

This will ensure that the safety of the product is maintained.

 Do not charge an electronic device while the power bank unit is being charged.
 Disconnect charging cable from the power bank when not in use

T1036 USER MANUAL

The T1036 is a UL 2056 Certified 4,400 mAh rubberized power bank. Please see below product
specifications & user guide.

T1036 Specifications

1. Item No.: T1036

2. Model: SP8186

3. Battery Type: UL Certified lithium Ion battery

4. Battery Duration/Lifespan: 500 times

5. Battery/Cell Capacity: 1x DC 3.7V / 4,400 mAh; 15.84Wh

6. Product Capacity: 1x DC 5V / 2,600 mAh; 13Wh

7. Power Input: DC 5V/1.5A

8. Power Output: DC 5V / 1x 1A & 1x 2.1A

9. Maximum Current Input: 2A

10. Operating temperature: 0~45˚C for Charging
0~45˚C for Discharging

11. Product Size: 3 3/8” X 1 11/16” X 15/16”

12. Net Weight: 124g

13. Charge Time: up to 6 hours

14. Accessories: Micro-USB/USB re-charging cable

15. Product Name: Power Bank

T1036 Product Map

To Recharge T1036

1. Insert the micro USB output of the charging cable into the T1036 & connect USB output to a

power supply (wall adapter with DC 5V output – not included).

2. Red LED lights will flash while charging & will remain solid red once power bank is fully charged.

To charge electronic devices using the T1036

1. Insert the following cable into the T1036 USB output:

a. To charge Android devices: use the micro-USB/USB cable included with the T1036.

No

Description

1

Micro-USB input port

2

USB outport port (DC 5V/1A)

3

USB outport port (DC 5V/2.1A)

4

ON/OFF Power Button

5

LED indicator

b. To charge IOS devices: use the certified charging cable accessory that came with your

smart phone/electronic device.

2. Turn the power bank ON (press power button once).

3. Blue LED lights will remain lit while your device is being charged (the T1036 will automatically

power off once your device is fully charged)

4. To stop charging, double press the power button & disconnect the charging cable

NOTE: if the LED light is turned off, the charging process will be disconnected

ITE: Accessories Lithium Ion battery

CAUTION:

Risk of Fire and Burns, don’t open, crush, disassemble and dispose of in fire. Accessible surfaces held or
touched for short periods only. Don’t heat above 50 °C or Incinerate. Follow Manufacturer’s Instructions

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received,
including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.