Speco Technologies WDRB1 User Manual

◈FEATURE

1. Long visible range at night.(50m Max. indoors, 40m Max. outdoors)

2. This camera uses split glass technology to prevent IR light reflection.

3. This camera has a vari-focal IR lens to prevent focus drift under IR lighting.

4. The IR cut filter is removed at night to receive maximum available light.

5. This product is weather proof to resist rain, snow and other environmental factors.(IP65)

6. This product is made of corrosion-free materials to resist rust and corrosion for extended periods of time.

7. The built-in sunshield helps the camera produce clear pictures under a variety of lighting conditions.

8. Power & video cables are concealed for extra security.(Cable through the mount).

9. Unique bracket allows the camera to be fully adjustable from both wall and ceiling mounting positions.

10. This camera is incredibly to install with its 3-axis

camera construction, which makes the camera ceiling, wall or slope mountable.

11. Mechanical filter exchange(True Day & Night),

built-in WDR function.

12. Supreme resolution.(690 TV-Line)

◈DIMENSION

◈CONFIGURATION

◈WALL MOUNT INSTALLATION #1

1. Make a hole Ø30mm in diameter for routing cable.

2. Using the mounting plate, drill four holes on the wall.

3. Insert the anchors.

4. Attach the screws.

◈WALL MOUNT INSTALLATION #2

1. Adjust horizontal angle.

1) Loosen the bolt to adjust the horizontal angle of the camera.

2) Use the WRENCH to tighten the bolt after adjusting the camera.

2. Adjust vertical angle

1) Loosen a bolt to adjust vertical angle of the camera.

2) Use the WRENCH to tighten a bolt after adjusting the camera.

WDRB1

◈CEILING MOUNT INSTALLATION #1

1. Make a hole Ø30mm in diameter for routing cable.

2. Using the mounting plate, drill four holes on the ceiling.

3. Insert the anchors.

4. Attach the screws.

◈CEILING MOUNT INSTALLATION #2

1. Adjust horizontal angle.

1) Loosen the bolt to adjust the horizontal angle of the camera.

2) Use the WRENCH to tighten the bolt after adjusting the camera.

2. Adjust vertical angle

1) Loosen the bolt to adjust the vertical angle of the

camera.

2) Use the WRENCH to tighten a bolt after adjusting

the camera.

◈SPECIFICATION

Model No.

WDRB1

Image Sensor

1/3" PIXIM DPS SENSOR - SEAWOLF

Effective Pixel

758(H) X 540(V) PIXEL

Resolution

690 TV- Line

TV Type

NTSC

Sync. Type

Internal / External

Scanning System

Progressive scan

Video Output

1.0 Vp-p(Sync. Negative) Termination 75Ω±10%

Gamma Characteristic

γ = 0.45(Selectable)

White Balance

ATW / AWC / MANUAL(2,000 ~ 11,000°K)

Min. Illumination

0.1 Lux(Sense up X64) 0 Lux(131ft range at LED high)

S/N Ratio

More 50 dB(AGC OFF)

SDNR

Backlight

WDR / BLC / OFF

DNR

True D&N(AUTO / COLOR / BW)

Day & Night

AUTO / MANUAL

Shutter Speed

Max. X64(X2, X4, X8, X16, X32, X64)

Test Illuminance Area

Average test illuminance by front view

Reverse Polarity Protection

Regulated 12V DC or 24V AC

Power Supply

Max. 500mA(at 12V DC) Max. 510mA(at 24V AC)

Current Consumption

Yes

LENS

Vari focal auto iris lens

Operation Temp.

14 °F to 122 °F

Preservation Temp.

-4 °F to 140 °F

Dimension

3.1”(W) X 3”(H) X 6.8”(L)mm

Weight

3.3 Ibs.

※AII specifications are subject to change without notice to

improve the quality.

◈FUNCTIONS

1. Setup for camera functions

①Setup : Press "SETUP" button to go to the menu. ②Up, ③Down : Use "UP" or "DOWN" button to

navigate.

④Left, ⑤Right : Use "RIGHT" or "LEFT" button to

navigate

⑥EXT-VIDEO : Test monitor connection.

2. Camera function setting

OSD

Select menu

Sub

Summary

LENS SELECT

Lens type selection (Fixed iris lens or Vari-focal auto iris lens)

MANUAL

EXPOSUR E…

MANUAL

*Preset mode for common application to speed up installation

PRESETS CUSTOM

User setting value

INDOOR

For indoor

WINDOW

Maximizing WDR function

OUTDOOR

For outdoor

WDR LOW

Although the subject had a bright light behind of it, you can see the subject clearly as well as background

NORMAL

MEDIUM

HIGH

BLC OFF

Determines that use BLC(Back Light Compensation) function or not

AGC CUSTOM

- -

AGC level selectable (CUSTOM - - LIMIT : 60)

LOW(24)

MEDIUM (30)

HIGH(36)

SENSEUP

Determines that use the SENSE-UP function or not and SENSE-UP level selectable

OFF

No use sense-up mode

AUTO - -

Use sense-up mode automatically in low illumination (Limit : 2X ~ 64X)

MANUAL

- -

Sense-up level selectable between x2 ~ x64

FLICKERL ESS

OFF

Optimized mode for flicker (If user choose CRR2 mode, AWC mode is not available on the White Balance menu)

WHITE BALANCE

ATW

CRR

Balances the color automatically depending on the source of light from 2,000°K ~ 11,000°K

AWC

CRR2

Move the camera lens toward to white paper then press the enter button to find the optimal white balance for current environment (User can not use this mode when Flickerless is CRR2)

MANUAL R/B - -

Adjust the Red or Blue values to shift the color of the object

KELVIN - -

Adjust color temperature

DAY& NIGHT

AUTO

INPUT DELAY (Sec)

The camera automatically detects lighting condition and selects the mode accordingly

COLOR

The picture is always displayed in Color

B/W

The picture is always displayed in Black and white

IMAGE ADJUS T…

GAMMA

25 ~ 45 ~ 100

Change the GAMMA of the screen(Default : 45)

SHARPNE SS

MIN ~ MAX

Change the sharpness of the screen(Default : Max)

COLOR GAIN

-8 ~ 0 ~ 8

Change the color gain of the screen(Default : 0)

FLIP

OFF

Normal image(No image inversion)

HORIZ

Set a horizontal image inversion

VERT

Set a vertical image inversion

BOTH

Set horizontal and vertical image inversion

ZOOM

OFF

Normal image(No Zoom)

Max 4x digital zoom available

PAN, TILT : Zoomed in image can be moved to horizontal and vertical

MOTION

OFF No use motion detection function

ON…

REA SELECT

Select motion detection area up to 4 area

AREA 1 ~ 4

- Adjust position & size of motion detection area

- Press the enter button to move into the motion area setting section, whenever you press the enter button, the mask color is changed.

- When the mask color is white you can set the position of mask by up, down, left and right button.

- When the mask color is green and red you can adjust the size by 4 buttons.

- Press the enter button for a few second to escape.

PRIVACY

OFF No use privacy mask function

ON - MASK

1~12

- Allow you to mask certain areas of the screen, support 12 privacy zone

- Press the set button to move into the privacy mask setting section, whenever you press the set button, the mask color is changed.

- When the mask color is white(or black or RED) you can set the position of mask by up, down, left and right button.

- When the mask color is blue, you can adjust the size by 4 buttons.

- Press the set button for a few second to escape.

MASK COLOR

Select mask color (WHITE, BLACK, RED)

FUNCTION SETUP..

CAMERA ID SETUP ID DISPLAY

Display the camera ID on the screen

CAMERA ID

Change the camera ID

ID POSITION

Select the position to display the ID on the screen

SYNC INT

Internal Sync with 12V DC power

L.L External Sync with 24V AC power

(Dual power only)

V-PHASE

Phase contollable at 24V AC input(L/L mode)

ㆍThe ' ' icon appeared with desired function, press the set

button to move sub menu.

ㆍThe '- - -' icon appeared with function that is unavailable

according to function setting.

ㆍUser can control the menu by using PELCO-D, 2,400bps

only

3B15000A

WDRB1

Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 7/5/11.