Speco Technologies VM-2001B User Manual

VM-2001B

20” High Resolution B/W Monitor

Specifications

General Construction Steel cabinet with plastic front panel
Weight N.W./G.W.: 19.5kg/22kg
Electrical Input Voltage 96~256 Vac 50/60Hz
Power Consumption 48w
Input Signal 0.5 to 2.0 Vp-p composite video,

negative synchronization
Input Impedance 75 ohms or high (switchable)
Bandwidth 100 Hz to 10 MHz
Video Gain 30 db
Center Resolution 1,000 lines
Corner Resolution 800 lines
Horizontal Linearity 15% maximum
Ve rtical Linearity 10% Maximum
Overscan <10%

Operation System

Horizontal EIA 15,750 Hz ± 400 Hz
Ve rtical EIA 60 Hz
Horizontal CCIR 15,625 ± 400 Hz
Ve rt i cal CCIR 50 Hz
Video (In/Out) Connections BNC x 2
Audio (In/Out) RCA Jack x 2
Audio Input Signal 10 ~ 150mVp-p
Audio Amplifier 1W/8 ohm (Inc. a speaker)

Environmental

Operation Temperature 14 to 122˚F
Storage Temperature -4 to 158˚F
Humidity 30-90%RH
Dimensions 18.6” (W) x 18.7” (H) x 14.2” (D)
Front Control Power On/Off push button switch

H-Hold/V-Hold/Contrast/Bright: rotary control

Vo lume: rotary control
Certifications UL, CE, CSA, FDA, FCC, CUL, TUV

Specifications subject to change

For more information contact us at:

Speco Technologies 200 New Highway, Amityville, NY 11701 Web: www.specotech.com

Toll Free: 1-800-645-5516 In Metro NY: 631-957-8700 Fax: [phone] or 631-957-3880

The VM-2001B is a high resolution monochrome
video monitor perfect for security and
surveillance applications. It is intended for use in
CCTV applications requiring a large screen display
and the resolution of fine image detail. This
monitor provides crisp, clear, large-screen images
that allow you to observe the details in smaller
video inset boxes common on quad and
multiplexer displays. The cabinet is made of steel
for ruggedness and durability. The VM2001B also
features looping video input/output. Controls for
brightness, contrast, horizontal hold, vertical hold
and AC power on/off are conveniently located
behind a protective front panel door.