Speco Technologies HT-7816DNV User Manual

◈

FEATURES

1. Long IR range at night. (50m Max. indoors, 40m Max. outdoors)

2. Adjustable level for LED activation and filter change according to light level as follows: Level 1 Level 2 Level 3

LED ON LED OFF

Example: If selecting "Level2":

- LED turns on under 5 lux automatically

- Filter changed into B/W mode at 5 lux,

2 seconds after becoming 5 lux.

- Filter changed into color mode at 15 lux,

5 seconds after becoming 15 lux.

3. This camera uses split glass technology to prevent IR

light reflection.

4. This camera has a vari-focal IR lens to prevent focus shift

under IR lighting.

5. The IR cut filter is removed at night to receive IR light.

6. This product is weather proof to resist rain, snow and

other weather factors (IP67)

7. This product is made of a corrosion-free material to resist

rust and corrosion for extended periods of time.

8. Built-In sunshield helps give good picture quality under

various lighting conditions.

9. Day/Night mode, Mirror, Phase shift, BLC, ALC/ELC, FLK,

Color bar chart and AGC functions are controllable from an OSD menu structure.

10. Power & video cables are concealed for extra security

(Cable through the mount).

11. Easily mount and adjust from wall and ceiling

installations.

12. Dual voltage operation. You can connect 24V AC or 12V

DC regardless of polarity. The Line-Lock function is available when you use 24V AC

13. Adjustable IR output level to meet all conditions.

14. Built-In heater allows the camera to operate at all

temperatures.

-Heater ON/OFF temperature. ON OFF 1st Heater

2nd Heater

*ON/OFF point of heater is subject to the environment.

◈

CONFIGURATION

8Lux 5Lux 3Lux

18Lux 15Lux 13Lux

73.5℉ 82.5

℉

◈

WALL MOUNT INSTALLATION #1

CEILING MOUNT INSTALLATION #1

1. Make a hole Ø30mm in diameter for routing cable.

2. Using the mounting plate, drill four holes on the wall.

3. Insert the anchors.

4. Attach the screws.

◈

WALL MOUNT INSTALLATION #2

1. Adjust horizontal angle.

1) Loosen the bolt to adjust the horizontal angle of the camera.

2) Use the WRENCH to tighten the bolt after adjusting the camera.

℉

2. Adjust vertical angle

1) Loosen a bolt to adjust vertical angle of the camera

2) Use the WRENCH to tighten a bolt after adjusting the camera.

1. Make a hole Ø 30mm in diameter for routing cable.

2. Using the mounting plate, drill four holes on the ceiling.

3. Insert the anchors.

4. Attach the screws.

◈

CEILING MOUNT INSTALLATION #2

1. Adjust horizontal angle.

1) Loosen the bolt to adjust the horizontal angle of the

camera.

2) Use the WRENCH to tighten the bolt after adjusting the camera.

2. Adjust vertical angle

1) Loosen the bolt to adjust the vertical angle of the camera.

2) Use the WRENCH to tighten a bolt after adjusting the camera.

◈

FUNCTIONS

[ SETUP FOR CAMERA FUNCTIONS ]

- Function setting combination

OSD MENU

- dn(DAY&NIGHT) : DAY&NIGHT mode setting

- R(MIRROR) : Reversed image ON/OFF

- P(V-PHASE) : The Line-Lock Phase can be adjusted

- B(BLC) : Back Light Compensation mode setting

- L(ALC/ELC) : Iris mode selection(ALC-Auto Iris Lens /ELC-Electronic exposure) *ALC mode is recommended

- F(FLK) : Flickerless ON/OFF

- C(Chart) : Color bar chart mode setting.

- G(AGC) : AGC mode setting.

- T(Turbo) : Turbo AGC mode setting.

- EXT.VIDEO : Plug your video test monitor in here. You can use the included RCA cable.

- IRIS : Adjust video output level of DC lens

- LED: LED level adjust(*Factory default is MAX.) * Caution : When adjusting "IRIS" or "LED", do not use

excessive force.

CAMERA FUNCTION SETTING

◈

DIMENSIONS

◈

SPECIFICATIONS

Type

Image Sensor Effective Pixel Cell size Horizontal Resolution TV Type Sync. Type Scanning System

Scan Freq. (HOR.)

Scan Freq. (VERT.)

Video Output

Gamma Characteristic

Min. Illumination

S/N Ratio 50dB or more (AGC OFF) Mirror On / Off Flickerless (FLK) On / Off IRIS Auto Iris Day/Night function Automatic (Selectable) Reverse polarity protection External Control Yes Shutter Speed (Electronic) Tes t Illuminance Area

Power Supply

Consumption Current

Operation Temp LED 30PCS

LENS

Dimension 3.1”W x 3”H x 6.8”L Weight 3.3Ibs.

* The specification is subject to change without any prior

notice to improve the quality.

Weatherproof True Day/Night ICR Color Camera 1/3” Sony Super HAD CCD

768(H) x 494(V)

6.35㎛(H) x 7.4㎛(V) Color: 550 TV-LINES

B/W: 600 TV-LINES NTSC Internal / External (Line-Lock)

2:1 Interlace

NT:15.734KHz L/L:15.750KHz INT:59.94Hz L/L: 60Hz

1.0Vp-p (Sync-Negative) Termination 75Ω

r =0.45 Typical

0 Lux (40M Range): LED ON

0.05 Lux (F/1.2) : LED OFF

Active

1/60~1/100,000 second

Average test illumination by front view 12VDC / 24VAC DUAL VOLTAGE

Max.950mA

-14℉~+ 122℉

Auto Iris Varifocal Lens (3.8 – 9.5mm)