Speco Technologies HT7715DNVW, HT7715DNV User Manual

HT7715DNV (Grey Housing) HT7715DNVW (White Housing)
560 Line Color Bullet Camera Weatherproof, Day/Night High Resolution Wall & Ceiling Mountable
Please read this manual thoroughly before operation and keep it handy for further reference.
WARNING & CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAU TIO N : TO RE DUCE T HE RIS K OF ELE CTRIC SHOCK
The ligh ting flash with an arrowhead symbol, within an equilateral triangle is
Intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of ele ctric sho ck to persons____ ___________________ _____________
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (serving) instructions
in th e l iter atu re a cco mp an yi ng th e a pp li an ce__ __ __ __ ___ __ __ ___
I NF OR MA T I ON -Th is e qui pm en t h as b e en t e ste d a n d f o u n d t o c om pa n y w it h
l im i t s f or a c l a s s a d i g i t al d ev ic e P ur su a n t t o p ar t 1 5 o f t h e F CC r ul es.
T h e s e l i m i t s a re d es ig n e d t o p ro vi de re as on ab le pr ot ec t i on a g a in st h ar mf ul
I nt er fe re n c e W he n t he e qu ip m e n t s o pe rat ed i n a c om me rc ia l e nv ir o n m e n t .
T his e q ui pm en t g en er at es , u ses, an d C an Ra di at e r ad io fr eque nc y ene rg y an d if no t i nst al led an d u se d in ac co rd an ce w it h t he i ns tr uct io n man ua l, m ay C aus e
Ha rm fu l i nt er fe re nc e to ra di o c om mu ni ca t io ns. Op er at io n of th is e qui pme nt i n a
r e s i d e n t i a l a r e a i s l i k e l y t o c a u s e h a r m f u l i n t e r f e r e n c e i n w h i c h
Ca se t he us er w i ll be re qui re d t o c or re ct th e i nt er fe re nc e a t h is o wn ex pe ns e.
WARNI NG – C hange or modifica tion not expressl y approved by the manufacturer could void
th e u ser ’s au th ority to op erate th e e qu ip ment _____ __ __ __ ___ ___ ___ ___ ___ ___ _____
CAUTION : To prevent electric shock and risk of fire hazards.
DO NOT use power sources other than that specified.______
DO NOT expose this appliance to rain or moisture.000
D O N O T R E MO V E C OV E R ( OR BA C K) .
N O U S ER S ER VI CE A BL E PA R TS I N SI DE
R E F E R S E R V I C I N G T O Q U A L I F I E D
S ER V IC E P ER SO NN E L. __ __ __ __ __ __ _ __
This installation should be made by a qualified service person and should conform to all local codes.
2
CONTENTS
Package Contents
Precautions
Features
Camera Installation
LED Pattern
Specifications
Dimensions
Warranty
4
5
6
7-11
12
13
14
15
3
PACKAGE CONTENTS
Please make sure that the following items are included in the package:
1 HT7715 Camera Series
3 Mounting Screws
1 Video test Connector
1 Wrench
Please leave this manual with the end-user for future
reference.
4
PRECAUTIONS
THIS CAMERA SHOULD BE ONLY INSTALLED BY QUALIFIED
PERSONNEL
TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE
PROPER POWER CABLE
DO NOT CELAN THE COVER WITH AN ABRAISIVE CLEANING
MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO CLEAN THE COVER
THERE ARE NO USER-SERVICEABLE PARTS INSIDE.
PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN TO MAKE INITIAL ADJUSTMENTS
PLEASE USE A UL APPROVED REGULATED 24 VOLT AC OR
12 VOLT DC POWER SUPPLY
PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE
TO PREVENT FIRE OR ELECTRICAL SHOCK
PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
SUPPORT THE WEIGHT OF THE CAMERA
PLEASE HANDLE THIS CAMERA CAREFULLY:
- DON’T USE A STRONG OR ABRASIVE DETERGENT WHEN CLEANING THE CAMERA.
- DON’T EXPOSE THE CAMERA TO DIRECT SUN
5
FEATURES
1/3” SONY Super-Had HQ-1 , 560 TV lines of resolution
Spilt Glass Technology – avoids IR reflections
Auto iris DC Varifocal Lens (4mm – 9mm)
LUX level dip switch adjusts day/night settings
to your requirements
Dual voltage operation
Video Test Connector for easy installation
Built-in 18 IR LEDs (80’ Range)
and CDS sensor for day/night performance
Controls for BLC,ELC,F/L and L/L
Weatherproof operation
Built-in heater extends operating range
and avoids condensation
Excellent low light level performance
0.03 Lux in existing light , 0.0 Lux with IR LEDs
Insulated mount reduces ground loops
Cable runs through the mount for protection
6
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500 mA)
Power Input :RED
Center : (+)
DC 12V Power Supply
2. WHEN USING 24 VOLTS AC (40 Volt Amps)
RED(+)
BLACK:(-)
AC 24V
Power Supply
3. CONNECT VIDEO CABLE
-Connect BNC Cable To The BNC Jack.
7
CAMERA INSTALLATION
Inner Controller Details
1.Function
2.V-Phase
3.Video Test
4.LUX Level
5.Zoom Controller
5.Focus
7.DC Lens Level
6.Heater
Controller
8
1.Function * DIP SWITCH
OFF
CAMERA INSTALLATION
ON
1234
(1)ELC (2)BLC (3)F/L (4)L/L
(1) ELC- Electronic Light Compensation
ON : Camera is in Electronic Shutter Mode OFF: Electronic Shutter is fixed at 1/60 and Auto Iris mode
is active
(2) BLC-Back Light Compensation.
BLC: If there is a strong light behind an object
the object may appear as a shadow. Activating the BLC will minimize this effect. The Coverage of the BLC is center plus bottom.
(3) F/L- Flicker-Less
ON : Use when the LUX changes often OFF: Use under normal circumstances
(4) L/L- Line Lock
Locks the camera to the 60 Hz of the wall outlet. Only operates in the 24 Volt AC mode
9
CAMERA INSTALLATION
2. V-Phase Level (UP/Down)
When desired, the vertical phase may be adjusted to synchronize the vertical phase of the camera with other cameras in the system. This feature is only available in 24 Volt AC operation
3. Video Test Connector
Allows the connection of a Local Monitor to make initial adjustments to the camera
4. Lux Level
Tells the camera when to switch to the B/W night mode. : Only one switch can be in the “on”position at a time.
OFF
ON
1 23
4
#1 STEP - The camera will switch at 1/2 lux #2 STEP - The camera will switch at 1 lux #3 STEP - The camera will switch at 3 lux #4 STEP - The camera will switch at 5 lux
5. Zoom Controller / Focus Controller
6. Heater
7. DC Lens Level
Fine tune the Auto IRIS Lens
10
CAMERA INSTALLATION
COMPATIBILITY
CVCTPLATE
CVCTPEXT“A” type Box “B” type Box
Original Mounting
Flange Should be removed to use CVCTPLATE
[CVCTPLATE Hole Description]
Hole 1 : CVCTPEXT
Hole 2 : Electrical Box “B” type
Hole 3 : Electrical Box “A” type
11
LED PATTERN
4-9mm VF lens 18 Mini IR LEDs (80’ Range)
12
SPECIFICATIONS
ITEM HT7715DNV Series Image Sensor 1/3” Sony Super-Had HQ-1 DSP CCD
Resolution 560 TV Line
Minimum illumination 0.03lux (IP Off) 0.00 LUX (IP on)
Lens Type
CDS Sensor Photoconductive Cells, Adjustable
Electronic Shutter
Video Output 1.0vp-p into 75 ohms composite
TV System NTSC
Scanning System 2 : 1 Interlace
Sync System Line Locked / Adjustable V-Phase. Line Lock/Internal On-Off
S/N Ratio More than 60db
IR Cut Filter Mechanical – Auto Adjusts when required
Gamma Characteristic 0.45
Power Supply 24 Volts AC, 12 Volts DC – Dual Voltage
Power consumption 600mA
Operating Temperature - 29~ +50( - 20℉ ~122℉)
Dimensions 2.4”W x 2.25”H x 7”L
Weight 1 lbs
Warranty 5Years
DC Auto Iris 4mm – 9mm (Varifocal)
1/60 – 1/1000,000 seconds
13
DIMENSIONS
Front View
Side View
14
WARRANTY
15
200 New Highway
Amityville, NY 11701
631-957-8700
www.specotech.com
VER. 090509
This manual is based on the date as shown in the right and specifications are subject to Change without notice for quality improvement.
Loading...