Speco Technologies HFB4M, HFD4M Users guide
INSTRUCTION
4MP Flexible Intensier Technology
TVI Motorized Zoom Focus Camera
MANUAL
HFB4M
(Bullet Camera)
HFD4M
(Dome Camera)
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specications without notice and without incurring any obligation.
Speco(Fit).indd 1 2020-05-21 오전 9:52:03
Rev. 01/01/2020
Contents
◑
Contents ...................................................... 2
◑
Precautions ................................................. 3, 4
◑
Safety Instructions ...................................... 5
◑
Package Contents ....................................... 6
◑
Camera Installation ..................................... 7-10
◑
Specications .............................................. 11,12
◑
Camera Dimension ..................................... 13
◑
Features ...................................................... 14
◑
OSD Menu Details ...................................... 15- 28
◑
Trouble Shooting ......................................... 29
- 2 -
Speco(Fit).indd 2 2020-05-21 오전 9:52:03
Precautions
Do not install the camera in
extreme temperature conditions.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
Never keep the camera pointed
directly at strong light.
Do not install the camera under
unstable lighting conditions.
Severe lighting change or flicker can
cause the camera to work improperly.
Do not drop the camera or subject
it to physical shocks.
Do not touch the front lens of the
camera.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
Do not expose the camera to
radioactivity.
It can cause malfunctions to occur.
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.
Housing damage can compromise
weatherproof ratings.
NOTE
If exposed to radioactivity the CCD
will fail.
- 3 -
Speco(Fit).indd 3 2020-05-21 오전 9:52:07
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION : To prevent electric shock and risk of fire hazards:
ō
Do NOT use power sources other than those specified.
WARNING - To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
In USA and Canada, Use Class 2 Power Supply Only
Speco(Fit).indd 4 2020-05-21 오전 9:52:10
- 4 -
Safety Instructions
Precautions for use
This camera should be installed by qualied personnel only
◑
There are no user serviceable parts inside
◑
Do not disassemble this camera other than to make initial adjustments
◑
Use a UL approved regulated 24 volt AC or 12 volt DC power supply
◑
Use appropriate low voltage power cable to prevent re or electrical shock
◑
Please insure that your installation area can support the weight of the camera
◑
Please handle this camera carefully :
Do not use a strong or abrasive detergent when cleaning the camera
◑
Do not install near cooling or heating device
◑
- 5 -
Speco(Fit).indd 5 2020-05-21 오전 9:52:10
Package Contents
Please make sure that the following items are included in the Package:
1) HFB4M Included Junction Box
• 1 Power Jack
• 1 Mount Base Sticker
• 1 Wrench
• Set Screw
- 3 Tapping Screws 4x25
- 4 Hexagon Socket Screws M4x14
- 3 Plastic Anchor
2) HFD4M Included Junction Box
• 1 Power Jack
• 1 Chameleon Cover
• 1 Junction Box Sponge
• 1 Wrench
• Set Screw
- 4 Tapping Screws 4x25
- 3 MachineScrews M4x15
- 4 Plastic Anchor
- 6 -
Speco(Fit).indd 6 2020-05-21 오전 9:52:10
Camera Installation
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500mA)
2. WHEN USING 24 VOLTS AC (40 Volt Amps)
3. CONNECT VIDEO CABLE
CONNECT BLACK COLOR BNC CABLE TO THE BNC JACK.
DC 12V Powe r Supply
Power In put :RED
Center : (+)
LBACK:(-)
RED(+)
Power Supply
AC 24V
- 7 -
Speco(Fit).indd 7 2020-05-21 오전 9:52:11
Compatibility
1) HFB4M
Camera Installation
INTCM
2) HFD4M
INTCMINTWM
- 8 -
Speco(Fit).indd 8 2020-05-21 오전 9:52:14
1. HFB4M
Camera Installation
WALL
ANCHOR, WHT, 6X30, PLASTIC, 4EA
JUNCTION BOX
SCREW-TAP, SLV, SUS, BH_4X25, TP1, 3EA
SCREW-MS, WHT, SUS, PH_M4X10, 3EA
SCREW-MS, WHT, SUS, PH_M4X14, 4EA
- 9 -
Speco(Fit).indd 9 2020-05-21 오전 9:52:15
2. HFD4M
Camera Installation
- 10 -
Speco(Fit).indd 10 2020-05-21 오전 9:52:15
Loading...