Speco Technologies DVR-16TS, DVR-16TN, DVR-8TN, DVR-4TN, DVR-16TT User Manual

DVR-4TN

DVR-8TN DVR-16TN DVR-16TS

DVR-16TT

Triplex+ Digital Video Recorder Family

With Network/DDNS Video Server

DVR-4TN/8TN/16TN/16ST/16TT Series SPECO TECHNOLOGIES 01/06

www.specotech.com

User’s Manual

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

Caution and Preventive Tips

• Take care not to drop the unit or subject the unit to major shocks or jolts.

• Do not place this unit on an unstable stand, bracket or mount.

• This unit is designed for indoor use only. Do not place the unit near water or in other

extremely humid conditions.

• This unit should not be placed in a built-in installation unless proper ventilation is provided.

• Please check the type of power source available before you plug and operate the unit.

• If the clearing is necessary, note to plug the unit from the outlet before uncovering the top

cover. Do not use liquid cleaners or aerosol cleaners. Use only a damp cloth for cleaning.

• Always power down the system prior to connecting and disconnecting accessories, with

the exception of USB devices.

• Lithium battery: Danger of explosion if battery is incorrectly replaced. Replace with

the same type of battery or equivalent type recommended by the battery manufacturer.

Dispose of used batteries according to the battery manufacturer’s instructions.

• Do not block the fan on the bottom of the unit – enough airflow is needed to protect the unit from overheating.

This symbol intends to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the

appliance.

This symbol intends to alert the user to the presence of unprotected “Dangerous

Voltage” within the product’s enclosure that may be strong enough to cause a

risk of electric shock.

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

Important Information

Before proceeding, please read and observe all instructions and warnings in this manual.

Retain this manual with the original bill of sale for future reference and, if necessary, warranty

service. When unpacking your unit, check for missing or damaged items. If any item is missing, or if

damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your dealer for

assistance.

Rack Mounting

Consult with the supplier or manufacturer of your equipment rack for the proper procedure and

hardware for mounting this product in a safe fashion. Avoid uneven loading or mechanical instability

when rack-mounting units. Make sure the units are installed to get enough airflow for safe operation.

The maximum temperature for rack-mounted units is 104 °F/40 °C. Check product label for power

supply requirements to assure that no overloading of supply circuits or over current protection

occurs. Main grounding must be reliable and uncompromised by any connections.

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

Table of Contents

1. Overview .....................................................................................................................10

1.1 Product Key Features ........................................................................................11

1.2 Product Application Diagram..............................................................................12

2. System Setup..............................................................................................................12

2.1 Position the Unit.................................................................................................13

2.2 Selecting Video Format......................................................................................13

2.3 Connecting Devices to the Unit..........................................................................13

2.4 Rear Panel Connections....................................................................................14

3. General System Setup ...............................................................................................17

3.1 Front Panel Introduction ....................................................................................17

3.1.1 LED Definition ......................................................................................18

3.1.2 Functional Keys....................................................................................19

3.2 Install HDD to the Unit .......................................................................................22

3.3 Power Up / Down the Unit .................................................................................23

3.4 Entering OSD Setup Menu ................................................................................24

3.5 System Date / Time Setting ...............................................................................25

3.5.1 Set Date / Time.....................................................................................25

3.5.2 Daylight Saving Time............................................................................26

3.6 Record Schedule / Quality Setting .....................................................................27

3.6.1 Record Mode........................................................................................27

3.6.2 Schedule Setup....................................................................................28

3.6.3 Preset Record Configuration ................................................................28

3.6.4 Per Camera Configuration....................................................................29

3.6.5 To Record Event Video Only ................................................................30

4. Basic Operation..........................................................................................................30

4.1 Viewing Live / Playback Video...........................................................................30

4.1.1 Viewing Modes .....................................................................................30

4.1.2 Digital Zoom .........................................................................................31

4.1.3 Viewing Live Cameras..........................................................................31

To Freeze Live Image..............................................................................31

4.1.4 Viewing Recorded Video ......................................................................32

Key Usage in Playback ...........................................................................32

Pause Playback and Single Step Forward..............................................33

Viewing Live Image in Playback Mode....................................................33

4.1.5 Dual Main Output (For DVR-16TT Only) ..............................................33

4.2 Sequence Setup ................................................................................................34

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

4.2.1 Sequence on Main Monitor.................................................................34

4.2.2 Call Monitor Control............................................................................34

4.3 Searching Recorded Video................................................................................35

4.3.1 Searching by Time................................................................................36

4.3.2 Searching by Event ..............................................................................36

4.4 Video Export ......................................................................................................37

4.4.1 Export from OSD Setup Menu..............................................................37

4.4.1.1 Select the External Device......................................................38

4.4.1.2 Select Video for Exporting.......................................................39

4.4.1.3 Digital Signature......................................................................40

4.4.1.4 Erase Disc...............................................................................40

4.4.2 Quick Video Export through Front Panel ..............................................40

4.4.2.1 ezBurn Introduction.................................................................41

4.4.2.2 To Export Normal Video ..........................................................41

4.4.2.3 To Export Event Video.............................................................42

4.5 Deleting Recorded Video...................................................................................43

4.6 Dome Control.....................................................................................................44

4.6.1 Dome Connection.................................................................................44

4.6.2 Dome Protocol Setup ...........................................................................45

4.6.3 RS485 Setup........................................................................................45

4.6.4 Dome Controlling Key ..........................................................................46

4.6.5 Setting Preset Points............................................................................48

4.6.6 Calling Preset Points ............................................................................49

5. Advanced System Configuration..............................................................................49

Key Usage in OSD Menu...................................................................................50

Key Usage in Virtual Keyboard..........................................................................50

5.1 System Setup ....................................................................................................51

5.1.1 Version .................................................................................................52

5.1.1.1 Model Name & Version ...........................................................52

5.1.1.2 Software Upgrade via Local Device ........................................52

5.1.1.3 Software Upgrade via Internet ................................................53

5.1.2 Language .............................................................................................53

5.1.3 Date / Time...........................................................................................54

5.1.3.1 Date / Time Setting .................................................................54

5.1.3.2 Date / Time Display.................................................................54

5.1.3.3 Date Display Mode..................................................................55

5.1.3.4 Time Display Mode .................................................................55

5.1.3.5 Date/Time Order .....................................................................55

5.1.3.6 Daylight Saving Time ..............................................................55

5.1.3.7 DST Start / End .......................................................................55

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

5.1.3.8 DST Bias.................................................................................56

5.1.4 Unit Name ............................................................................................56

5.1.5 Password .............................................................................................57

5.1.5.1 Admin / User Password(s) ......................................................57

5.1.5.2 Enable Password ....................................................................57

5.1.5.3 Load Factory Password ..........................................................58

5.1.6 Network Setup......................................................................................58

5.1.6.1 LAN Select ..............................................................................59

5.1.6.2 LAN Setup...............................................................................59

- DHCP......................................................................................59

- IP ............................................................................................60

- Netmask..................................................................................60

- Gateway..................................................................................60

- DNS ........................................................................................61

- PPPoE Account.......................................................................61

- PPPoE Password....................................................................62

- PPPoE Max Idle......................................................................62

- Connect At Booting .................................................................62

- Network Restart ......................................................................62

5.1.6.3 Dial-in Setup ...........................................................................62

- Dial-in Service.........................................................................63

- Dial-in Account........................................................................63

- Dial-in Password .....................................................................64

- Server IP.................................................................................64

- Client IP ..................................................................................65

- Dial-in Idle Time ......................................................................65

- Dial-in Max Time .....................................................................65

5.1.6.4 Dial-out Setup .........................................................................65

- Dial-out DHCP ........................................................................66

- Dial-out IP ...............................................................................66

- Dial-out Netmask ....................................................................67

- Dial-out Gateway ....................................................................67

- Dial-out DNS ...........................................................................67

- Phone Number........................................................................67

- Dial-out Account......................................................................68

- Dial-out Password...................................................................68

- Dial-out Idle Time....................................................................69

- Dial-out Max Time...................................................................69

- Connect ..................................................................................69

5.1.6.5 Trigger Port.............................................................................69

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

5.1.6.6 Email Address .........................................................................69

5.1.6.7 SMTP Setup............................................................................70

- Email via SMTP ......................................................................70

- SMTP Server ..........................................................................71

- SMTP Port ..............................................................................71

- SMTP Account ........................................................................72

- SMTP Password .....................................................................72

5.1.6.8 DDNS Setup ...........................................................................72

- Enable DDNS..........................................................................73

- Host Name..............................................................................73

- DDNS Port ..............................................................................74

- Submit/Update ........................................................................74

5.1.7 RS485 Setup........................................................................................74

5.1.7.1 Unit ID.....................................................................................74

5.1.7.2 Baud Rate...............................................................................74

5.1.7.3 Bits..........................................................................................75

5.1.7.4 Stop.........................................................................................75

5.1.7.5 Parity.......................................................................................75

5.1.8 Audio Output ........................................................................................75

5.1.9 Key Beep..............................................................................................75

5.2 Monitor Setup ....................................................................................................76

5.2.1 Show Camera Title...............................................................................76

5.2.2 Monitor Brightness..............................................................................76

5.2.3 Monitor Contrast...................................................................................76

5.2.4 Monitor Chrominance...........................................................................76

5.2.5 Screen Center Adjust ...........................................................................77

5.2.6 Show Color Bar ....................................................................................77

5.2.7 VGA Resolution....................................................................................77

5.3 Camera Setup....................................................................................................78

5.3.1 Camera Select......................................................................................78

5.3.2 Dome Protocol......................................................................................78

5.3.3 Dome ID...............................................................................................78

5.3.4 Camera Title.........................................................................................79

5.3.5 Covert...................................................................................................79

5.3.6 Termination...........................................................................................80

5.3.7 Brightness ............................................................................................80

5.3.8 Contrast................................................................................................80

5.3.9 Saturation.............................................................................................80

5.3.10 Hue.......................................................................................................80

5.3.11 Audio Association .................................................................................81

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

5.4 Record Setup.....................................................................................................81

5.4.1 Record Mode........................................................................................82

5.4.2 Schedule Setup....................................................................................82

5.4.2.1 Day / Night Time Start / End....................................................83

5.4.2.2 Weekend Schedule.................................................................83

5.4.2.3 Weekend Start / End ...............................................................83

5.4.3 Preset Record Configuration ................................................................83

5.4.4 Per Camera Configuration....................................................................84

5.4.4.1 Camera Select ........................................................................84

5.4.4.2 Normal PPS ............................................................................84

5.4.4.3 Normal Qlty .............................................................................84

5.4.4.4 Event Max PPS.......................................................................85

5.4.4.5 Event Qlty ...............................................................................85

5.4.4.6 Event Active ............................................................................85

5.4.5 ezRecord Setup....................................................................................85

5.4.6 Data Lifetime ........................................................................................86

5.4.7 Pre-Alarm Recording............................................................................87

5.4.8 Circular Recording................................................................................87

5.4.9 Audio Recording...................................................................................87

5.4.10 Purge Data ...........................................................................................88

5.4.10.1 Purge All Data .........................................................................88

5.4.10.2 Purge All Event Data...............................................................88

5.4.10.3 Purge Event Before.................................................................88

5.4.10.4 Start to Purge ..........................................................................88

5.5 Sequence Setup ................................................................................................89

5.5.1 Main / Call Monitor Dwell......................................................................89

5.5.2 Main / Call Monitor Schedule................................................................89

5.6 Event Setup .......................................................................................................90

5.6.1 Internal Buzzer .....................................................................................90

5.6.2 Event Icon ............................................................................................90

5.6.3 Email Notice .........................................................................................91

5.6.4 Event Full Screen .................................................................................91

5.6.5 Event Duration......................................................................................91

5.6.6 Per Channel Config..............................................................................91

5.6.6.1 Channel Select........................................................................92

5.6.6.2 Video Loss Detect...................................................................92

5.6.6.3 Motion Detect..........................................................................92

5.6.6.4 Detection Config .....................................................................92

- Detected Area Setup...............................................................93

- Sensitivity................................................................................93

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

- Area Threshold .......................................................................93

- Detected Area Percentage......................................................93

5.6.6.5 Alarm In ..................................................................................94

5.6.6.6 Alarm Out................................................................................94

5.7 Database Setup .................................................................................................94

5.7.1 Total / Free Size of HDD.......................................................................95

5.7.2 Avail. REC Time ...................................................................................95

5.7.3 Internal / External Disks .......................................................................95

5.8 Configuration .....................................................................................................96

5.8.1 Load Factory Default............................................................................96

5.8.2 Import Configuration.............................................................................96

5.8.3 Export Configuration.............................................................................97

5.8.3.1 Copy Destination.....................................................................97

5.8.3.2 Configuration Name ................................................................97

5.8.3.3 Begin Export ...........................................................................98

5.9 Video Export ......................................................................................................98

5.9.1 Select Device .......................................................................................99

5.9.2 Select Channel.....................................................................................99

5.9.3 From / To Time ...................................................................................100

5.9.4 Select Events .....................................................................................100

5.9.5 Data Type ...........................................................................................100

5.9.6 Digital Signature .................................................................................101

5.9.7 Erase Disc..........................................................................................101

5.9.8 Begin Export.......................................................................................101

5.10 Shutdown.........................................................................................................101

Appendix A: Technical Specifications ......................................................................... 103

Appendix B: Record Configuration..............................................................................105

Appendix C: Record Duration.......................................................................................109

Appendix D: Dial-up Connections via Modem ............................................................112

Establishing Dial-in Connection ................................................................................ 112

Establishing Dial-out Connection.............................................................................. 116

Appendix E: Verifying Digital Signature ......................................................................122

Appendix F: Alarm I/O Pin Definition...........................................................................125

Appendix G: Hard Disk Installation..............................................................................127

Appendix H: HDD PC Player Tool Introduction...........................................................131

Using EXT2IFS on Your PC......................................................................................131

Start Playing the *.drv file..........................................................................................133

Appendix I: IR Remote...................................................................................................135

Appendix J: ezRecord Diagram Sample......................................................................136

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

1. Overview

The DVR-4TN/8TN/16TN/16TS/16TT series unit is an integrated digital video

recorder that combines the features of a time-lapse audio / video recorder, a

multiplexer, and a video server to create a single security CCTV solution.

Its outstanding triplex+ operation enables users to view live or playback

recorded video, have remote access through network simultaneously while

recording other video, and to view previously recorded video instantly by

entering the time and date or selecting recorded video from the event list.

The total number of PPS (Pictures per Second) makes the main difference

among these models, shown as below table:

NTSC PAL

DVR-4TN/8TN/16TN DVR-16TS DVR-16TT

120 pps 240 pps 480 pps

100 pps 200 pps 400 pps

The DVR-4TN/8TN/16TN/16TS/16TT series includes SpecoRemoteTM, the

remote viewing and configuration software that is a Web-browser plug-in,

which allows the user to view live, or recorded video images, and enables

remote configuration. The remote software is stored in the

DVR-4TN/8TN/16TN/16TS/16TT series unit and deployed over a LAN, WAN

or Internet connection to remote Windows-based computers. This simplifies

the installation and maintenance of the software components so all remote

users are kept up to date.

DVR-4TN

DVR-8TN

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

DVR-16TN/16TS/16TT

1.1 Product Key Features

The DVR-4TN/8TN/16TN/16TS/16TT series offers advanced features not

typically found in standard multiplexers; it integrates the full features of a DVR,

multiplexer and video server (by using the software SpecoRemote key features of the DVR-4TN/8TN/16TN/16TS/16TT series are listed as

follows.

). The

• MPEG-4 high quality compression

• 16 channels for video input

• Triplex+ operation enabling simultaneous viewing live or playback while

continuing to record

• SpecoRemote

web-based software for remote monitoring and control

via LAN or Internet

• Embedded Linux operating system

• Real-time “live display” for each channel

• Recording frame rate up to 480 pps(NTSC)/ 400 pps(PAL)

• 2 Channels of audio recording/ playback

• Three USB2.0 ports for video clip export and/or backup

• Easy software upgrade via USB ThumbDrive

, CD/RW or Internet Remote

Application

• Up to 4 internal hard drives support up to 1TB capacity

• IEEE 1394 for external storage

• 2X Digital Zoom available in both live and playback mode

• Export video (AVI) with audio and digital Signature

• Exported AVI file can be played in any PC with DIVX decoder installed

• Automatic camera detection (Plug & Play)

• Covert camera operation provides enhanced security and administrator

control

• Per camera configuration for camera settings, frame rate, picture bit rate,

alarms, motion detection.

• Programmable day/ night/ weekend scheduling

• Programmable main monitor/ call-monitor switching sequence

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

• Powerful alarm processor allows flexible alarm trigger and responses,

including alarm, motion, and camera failure

• Dome control protocols: Speco, Pelco D, Pelco P, Fastrax 2 and AD422

• Two levels of password security

1.2 Product Application Diagram

Connect the unit with other devices as shown in the system diagram below to

complete a video surveillance solution. The figure also displays the

expandability and flexibility of this digital recording system.

2. System Setup

Priority notices and an introduction on system installation will be described in

this chapter. Please follow the instructions to operate the unit.

In order to prevent the unit from data loss and system damage that can be

caused by a sudden power fluctuation, use of an Uninterruptible Power

Supply (UPS) is highly recommended.

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

2.1 Position the Unit

Position / mount the DVR-4TN/8TN/16TN/16TS/16TT series unit in an

appropriate, steady location and make sure the power is off before making

any connections. The area should avoid hindering or blocking the unit from

airflow. Enough airflow is needed to protect the unit from overheating.

The maximum allowable temperature of operating environment is

104°F/40°C.

The unit utilizes heat-conducting techniques to transfer internal heat to the

case, especially to the bottom side of the unit.

NOTE: Be sure not to remove the rubber feet, and always leave a

space for air ventilation on the unit’s bottom side.

2.2 Selecting Video Format

The DVR-4TN/ DVR-8TN/ DVR-16TN series unit is designed to operate under

either NTSC or PAL video formats. Please contact a qualified service person

to perform the installation procedure.

2.3 Connecting Devices to the Unit

This section lists some important notices that should be read before making any connections to the DVR-4TN/8TN/16TN/16TS/16TT series unit.

NOTE: Connect short-term external devices, such as USB

ThumbDrive

unit is successfully powered up.

Connecting Required Devices Before powering up, you should connect cameras and a main monitor to the

, USB CD-RW, USB Hard Disk Drive, etc., only after the

unit for basic operation. If needed, connect a call monitor for displaying full

screen video of all installed cameras in sequence.

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

Connecting Short-term Device

If you plan to install any short-term external devices, such as USB CD-RW,

USB Hard Disk Drive, etc, to the DVR-4TN/8TN/16TN/16TS/16TT series and want to use them as part of the unit system. Make sure those devices are connected only after the DVR-4TN/8TN/16TN/16TS/16TT is powered up. The DVR-4TN/8TN/16TN/16TS/16TT series unit can only recognize the

external devices after the power-up process is completed.

2.4 Rear Panel Connections

There are several connectors on the rear panel of the

DVR-4TN/8TN/16TN/16TS/16TT series units available for installations. The

following figure shows the connectors by name and a detailed description of

each connector follows.

There is one difference between the rear panel of different models;

DVR-4TN/8TN/16TN has an IEEE 1394 connector and DVR-16TS/TT has a

1000M LAN Port instead, shown as below figures.

Rear Panel of DVR-4TN/8TN/16TN:

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

Rear panel of DVR-16TS/16-TT:

Main Monitor (S-Video/ BNC/ VGA)

S-Video, BNC and VGA output connectors are available for connecting to a

main monitor. The main monitor displays live image and playback recorded

video in full-screen or multiple window format.

RS-232C

The unit provides a RS-232C communication port for sending and receiving

signals.

Alarm I/O & RS485 Port

The unit provides an Alarm I/O and RS485 port that offers user the flexibility

required to connect the unit to another device.

Refer to

Appendix F: Alarm I/O Pin Definition for detailed pin information on

the Alarm I/O for the DVR-4TN/8TN/16TN/16TS/16TT.

IEEE1394 (for DVR-4TN/8Tn/16TN only) DVR-4TN/ DVR-8TN/ DVR-16TN series unit is equipped with two IEEE1394 (FireWire®) ports for extended connections.

LAN 1000M (for DVR-16TS/16-TT only)

This port is for DVR-16TS/16-TT to connect to a NAS device.

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

Audio In / Out

The DVR-4TN/8TN/16TN/16TS/16TT series unit provides two channels of

audio recording and playback. The Audio In RCA connector is offered for

connecting an audio source device (e.g. external amplified microphone) to the

unit. The Audio Out RCA connector is available for connecting an audio output

device (e.g. amplified speakers) to the unit.

USB 2.0 (x3)

There are two USB2.0 ports on the rear panel and one on the front panel to allow users to connect external USB devices to the unit, such as a ThumbDrive®.

The DVR-4TN/8TN/16TN/16TS/16TT allows the user to preset the OSD

settings using a USB mouse.

LAN (RJ-45)

The DVR-4TN/8TN/16TN/16TS/16TT series is capable of networking. The LAN port allows the DVR-4TN/8TN/16TN/16TS/16TT series to access the network/Internet through an Ethernet connection.

Power Supply

The DVR-4TN/8TN/16TN/16TS/16TT series includes an AC power

connection jack. Please use the power supply that ships with the unit.

WARNING: Use of a different power supply may cause overloading.

NOTE: Use of other power supply may cause overloading.

Power Switch Used to power up and shut down the unit.

Call Monitor (BNC)

The call monitor is used to display full screen video of all installed cameras in

sequence. The BNC call monitor connector allows the user to connect an

optional call monitor to the DVR-4TN/8TN/16TN/16TS/16TT series unit.

Video Input

A group of BNC connectors are available for video input streams from

installed cameras. The number of connectors is equal to the number of

channels; the DVR-4TN/8TN/16TN/16TS/16TT units have 4/ 8/ 16 BNC

connectors on the rear panel, respectively.

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

Camera Looping

Groups of BNC connectors are positioned on the rear panel for looping out

video input.

3. General System Setup

The DVR-4TN/8TN/16TN/16TS/16TT

series DVR allows the user to easily

access some general operations through the front panel. The following

subsections introduce general operation of the unit.

The regularly displayed OSD information and its positions are shown in the

following figure. The channel title is displayed on the top-left side of the

window, either in full screen mode or in multiple channel mode. The current

operating mode, including Call mode, Dome-Control mode, Playback mode.

Freeze mode and Sequence mode, is displayed on the bottom-left side of the

screen. The date/ time information is displayed on the bottom-right side.

Ch4

Playback

2005/11/09 PM04:31:22

3.1 Front Panel Introduction

The unit’s front panel controls enable the user to control the unit and preset

programmable functions.

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

3.1.1 LED Definition

The DVR-4TN/8TN/16TN/16TS/16TT series LEDs on the front panel are

described as follows.

Power LED (Green)

The LED should be lit when the power is connected.

HDD LED (Yellow)

The LED will be lit while the HDD is processing data to or from the connected

HDD(s).

Alarm LED (Red)

The LED should be lit when an alarm is triggered.

Network LED (Green)

The LED should be lit when the DVR-4TN/8TN/16TN/16TS/16TT series unit is

connected to a network and blink when any data is being transferred.

REC LED (Green)

The LED should blink while the DVR-4TN/8TN/16TN/16TS/16TT series unit is

recording.

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

3.1.2 Functional Keys

The DVR-4TN/8TN/16TN/16TS/16TT series unit function keys on the front

panel are described below for normal operation.

COPY

Used to quick export video to an external device, including USB CD-RW and

ThumbDrive®, etc. For more detailed operation instructions refer to Section

4.7.1 To Export Video..

CALL

Press to enter call monitor control mode; press ESC to exit.

Direction Keys

• In Zoom mode, these keys function as Direction keys.

• In the OSD setup menu, the Direction keys are used to move the cursor to

previous or next fields. To change the value in the selected field, press UP

/ DOWN keys.

DOME

Press this key to enter dome control mode. Please refer to Section 4.6 Dome

Control for more details about controlling operation.

ESC

Press to cancel or exit from certain mode or OSD menu without changing the

settings made previously.

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

MODE

Press repeatedly to select desired main monitor display format. There are three view modes available: full screen, 4-window (2×2) and 16-window (4×4).

Refer to Section 4.1.1 Viewing Modes for more detailed information.

PLAY/STOP

Press this key to switch between live image and playback video.

NOTE: Video taken within the latest 5 ~ 10 minutes cannot be played

back because the video is still saved in the buffer.

FREEZE

• Press FREEZE while viewing live image, the live video will be frozen, but

the date / time information shown on the monitor will continue updating.

Press FREEZE again to return to live mode.

• Press FREEZE while playing recorded video, the playback video will be

paused. Press LEFT / RIGHT to move the recorded video reverse / forward

by a single step. Press FREEZE again to continue playing video.

SEQ (Sequence)

Press to start automatic sequencing of the video coming in from the installed

cameras.

In both Playback and Live mode, the user can press SEARCH to call up the

Search menu for searching and playing back recorded video by date and time

or events.

Press this key to call up the OSD setup menu.

ZOOM/ENTER

• In OSD menu or selection interface, press this key to make the selection or

save settings.

• In live full screen view mode, press to view a 2× zoom image; press key

again to return.

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

CHANNEL

• When in both Live and Playback modes, press the CHANNEL key to view

the corresponding video in full screen. The number of the CHANNEL keys

corresponds to the number of cameras supported by the unit.

• When in dome control mode, the key named “1” is used to access the

Set/Go preset menu; the key named “2” is used to hide or display the

dome setting parameters.

JOG/SHUTTLE

The jog/shuttle knob, shown in the figure below, is a combination of a shuttle

ring with an embedded jog disk, which is used to provide wide latitude in

playback control. Note that the jog/shuttle knob is active only when the DVR

unit is in Playback mode.

• While playing back video, you can use the shuttle ring to select different

speeds of forward and backward playing. Rotating the shuttle ring

counterclockwise causes the unit to playback in fast forward/ backward

playing speed. According to the angle you rotate the shuttle ring, you can choose the playing speed from 1×, 2×, 4×, 8×, 16×, and 32×, in both forward

and reverse directions, shown in the figure below:

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

• Inside the shuttle ring is the jog disk, shown in the illustration below, it can

turn completely in either direction. Once you freeze the video, you can use

the jog disk to go to single-step play back. Clockwise rotation causes

forward one-step playback; and counterclockwise rotation causes

backward one-step playback.

3.2 Install HDD to the Unit

There is an empty cartridge positioned on the front panel where the user can

install a swappable HDD. There are two possible situations when you install a

HDD into your DVR.

• If you install a new HDD, the DVR will format it and add it into your

database automatically.

• If you install a used HDD that does not have the DVR format, the DVR will

show, “1 disk(s) with wrong data format! Please format then add to the

database manually”. Then please follow the steps described below:

- Enter the menu with the administrator privilege and access the

<Database Setup> section

- Access the <Internal (or external) Disks>

- When you see the available disk/s, select <format> to format it

- After formatting is OK, select <Add> to add them into your database.

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

3.3 Power Up / Down the Unit

If you must shut down the DVR-4TN/8TN/16TN/16TS/16TT series unit for any

reason, use the proper shut down and power up procedures to avoid damage

to your DVR unit..

To Power Up the Unit

First check the type of power source available is compatible before plugging

in your DVR and turn on the unit using the power switch on the rear panel.

The color bar and system checking information will be shown on the monitor

and disappear when the unit has been completely powered up.

To Restart / Shutdown the Unit

Press MENU and input the administrator password to access the OSD Main

menu. Select <Shutdown> in Main Menu and press ENTER to enter the

Shutdown menu, which displays as follows.

Shutdown

1. Power Off

2. Reboot

Execute Execute

Select this item to shut down the unit. Do not disconnect the power during

shut down until the message “You can safely turn off DVR now!” displays.

Select this item to reboot the unit. The color bar and system checking

information are displayed on the monitor until the unit is completely restarted.

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

3.4 Entering OSD Setup Menu

The OSD Main menu contains a list of items that are used to configure the

DVR-4TN/ DVR-8TN/ DVR-16TN series. To enter the Main menu, correct

Administrator or User password is required.

Three sets passwords are offered for different Administrators and Users--if

there is more than one.

To enter OSD Main menu, press MENU and then enter either Administrator or

User password. The Password Verification screen will then display as follows.

Password Verification

________

Press Channel Keys To Enter Password

(4-8 Digits)

Press ◄ Key To Delete

NOTE: If entering wrong password for 3 times, the system will be

locked out, and you will not be able to enter OSD menu within 2

minutes.

The default passwords are shown in the following table. The same passwords

are used for entering the remote viewing software SpecoRemote

Administrator Passwords User Passwords

1234 4321

It is strongly recommended that you change the passwords to prevent

unauthorized access to the unit.

After entering the correct password, the Main menu is displayed.

Main Menu

1. System Setup

2. Monitor Setup

3. Camera Setup

4. Record Setup

5. Sequence Setup

6. Event Setup

7. Database Setup

8. Configuration

9. Video Export

10. Shutdown

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

Move the cursor up / down over the OSD items using the Direction keys and

press ENTER to enter the selected sub-menu.

3.5 System Date / Time Setting

The user can set the current date, time and other OSD parameters in the

Date/Time menu. The administrator’s privileges are required for entering the

submenu. In the OSD Main menu, select <System Setup> and press ENTER,

then select <Date/Time> to access the Date/Time menu; the menu displays

as follows.

Date/Time

1. Date

2. Time

3. Date/Time Display

4. Date Display Mode

5. Time Display Mode

6. Date/Time Order

7. Daylight Saving Time

8. DST Start

9. DST End

10. DST Bias

Apr, 1st Sun, 02:00

Apr, Last Sun, 02:00

2005/02/21

PM10:39:26

1 Row

Y/M/D

24 HR

Date First

OFF

60 Min

3.5.1 Set Date / Time

Set Date / Time

Select <Date> / <Time> and press ENTER to adjust the settings. LEFT /

RIGHT keys are used to move the cursor to previous or next field, ENTER is

for selecting, and UP / DOWN are used to change the value in the selected

field.

NOTE: The reset date / time setting applies for recording new video,

the date and time of previously recorded video will not be changed.

NOTE: To avoid record database corruption, after changing the date /

time setting, it is recommended to clear the database.

Date / Time Display

Users are allowed to choose to set the date / time OSD displays in 1 or 2 rows.

Use the UP / DOWN keys to change the setting. The default is to display the

date / time OSD in one row.

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

Date Display Mode

This function allows user to set the OSD display type of the date / time. There

are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>. “Y”

represents “Year”, “M” represents “Month” and “D” represents “Day”.

Move to the desired item and press ENTER, the option starts blinking. Use UP

/ DOWN keys to change the setting. The default setting is <Y/M/D> in both

NTSC / PAL formats.

Time Display Mode

The user can choose to set the time format to <12 hour> or <24 hour>. Use

the UP / DOWN keys to change the format. The default setting is <24 hour>.

Date / Time Order

This item is used to set the order of the date / time display to <Date First> or

<Time First>. Use UP / DOWN keys to change the setting.

3.5.2 Daylight Saving Time

Daylight Saving Time

This item is for those people who live in certain regions to observe Daylight

Saving Time. Select <ON> to enable, or <OFF> to disable the function.

If the function is disabled, the DST Start / End time and DST Bias will be

grayed out and cannot be accessed.

NOTE: If this function is enabled, the date/time information will be

shown on the screen with a DST icon when playing back recorded

video or searching video in the event list. “S” indicates summer time

and “W” indicates wintertime.

DST Start / End

This is used to program the daylight saving duration. Use Direction keys to

move the cursor to the next or previous field, use UP / DOWN to change the

settings in the selected field.

DST Bias

This allows the user to set the amount of time to move forward from the

standard time for daylight saving time. The available options are <30>, <60>,

<90> and <120> minutes.

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

3.6 Record Schedule / Quality Setting

The Record Setup menu allows the user to set recording quality, recording

schedules and other recording parameters. This menu will not be able to

access if you enter the OSD Setup Menu with User’s password. In the Main

menu, move the cursor to <Record Setup> and press ENTER; the following

menu is displayed.

Record Setup

1. Record Mode

2. Schedule Setup

3. Preset Config

4. Per Camera Config

5. ezRecord Setup

6. Data Lifetime

7. Pre-Alarm Recording

8. Circular Recording

9. Audio Recording

10. Purge Data

720×240@60PPS

Standard

0 Days 15 Sec

ON ON

3.6.1 Record Mode

The Record Mode is for selecting resolution and recording rate. The relative

record settings, such as preset configuration, will follow the record mode setting. In normal circumstance, we recommend you to select <720 ×

240@60PPS> in NTSC format; or <720×288@50PPS> in PAL format.

Move the cursor to <Record Mode> and press ENTER, then select a Record

mode using the UP / DOWN keys.

NOTE: After changing the Record Mode setting, this warning message

“This will FORMAT ALL HARDDISKS and LOAD THE FACTORY

DEFAULT CONFIG!” will appear on the screen. Press ENTER to

confirm the selection. The unit will then start to format the hard disks

and load the factory default settings, or press ESC to abort.

We strongly recommend that you back up your programmed configuration before making any changes to Record Mode settings.

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

User’s Manual

3.6.2 Schedule Setup

The Schedule Setup is used to set the day, night, or weekend recording

schedule. Select <Schedule Setup> from the Record Setup menu and press

ENTER; the following menu is displayed.

Schedule Setup

1. Day Time Start

2. Day Time End

3. Night Time Start

4. Night Time End

5. Weekend Schedule

6. Weekend Start

7. Weekend End

Fri PM18:00

Mon

• Make appropriate changes for the start time of the Day Time and Night

Time schedule using the Direction keys.

06:00 18:00 18:00 06:00

YES

AM 06:00

• Press ENTER to confirm the settings or ESC to cancel.

• If you want to record over the weekend, choose <YES> to enable the

Weekend Schedule in advance and then set the Weekend Start/End time.

• Press ESC to back to previous page.

3.6.3 Preset Record Configuration

The <Preset Config> is used to preset recording quality and frame rate for

normal record and event record. In normal circumstances, we strongly

suggest you set the item to <Standard>, the default. Below tables show the

PPS and picture size under <Standard> in Half-D1 mode. Please refer to

Section 5.4.3 Preset Record Configuration for more detailed information.

DVR-4TN/8TN/16TN

Half-D1 mode (NTSC: 720x240@60PPS; PAL: 720x288@50PPS)

Normal PPS Normal Quality Event PPS Event Quality

4CH 8CH

16CH

NTSC:15 PAL:12.5 NTSC:7.5 PAL:6.25 NTSC:3.75 PAL:3.12

12 KB 20 KB

15 KB

NTSC:30 PAL:25

25 KB

DVR-4TN/8TN/16TN/16TS/16TT Series

SPECO TECHNOLOGIES 01/06

User’s Manual

DVR-4TS

Half-D1 mode (NTSC: 720x240@120PPS; PAL: 720x288@100PPS)

Normal PPS Normal Quality Event PPS Event Quality

16CH

NTSC:7.5 PAL:6.25

12 KB

NTSC:30 PAL:25

20 KB

DVR-4TT

Half-D1 mode (NTSC: 720x240@240PPS; PAL: 720x288@200PPS)

Normal PPS Normal Quality Event PPS Event Quality

16CH

NTSC:15 PAL:12.5

6 KB

NTSC:30 PAL:25

10 KB

3.6.4 Per Camera Configuration

This function is used to set the Day / Night / Weekend PPS (Picture per

Second) and Quality for each channel. The Preset Configuration must be set

to <OFF> for accessing these schedules. The menu displays as follows: (Record Mode: 720×240@60PPS in NTSC / 720×288@50PPS in PAL).

Per Camera Config

Cameral Select

Normal PPS Normal Qlty Event Max PPS Event Qlty Event Act

Day

7.5

Best

Both

Night

7.5

Best

30 Best Both

CH1

Weekend

7.5

Best

30 Best Both

• First, select a Camera to set its record configuration. The image and

record settings from the selected camera will be displayed on the screen.

• Move the cursor using the Direction keys and press ENTER to select an

item.

• Change the value using UP / DOWN keys.

• Press ENTER to confirm the settings or ESC to abort.

• Press ESC to return to Record Setup menu.

Please note that the total normal pps for all channels cannot exceed 60 NTSC (720×240@60PPS) / 50 PAL (720×288@50PPS). To increase one channel’s

pps, you may have to reduce other’s first. Event pps is not restricted to this

rule, since a smart event schedule will correct the total pps automatically..

DVR-4TN/8TN/16TN/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06

+ 109 hidden pages