CVC6146SCS Series
540 Line Color Dome Camera
Wall & Ceiling Mountable
Please read this manual thoroughly before operation and keep
it handy for further reference.
WARNING & CAUTION
to
the
presence
of
important
operating
and
maintenance
(serving)
instructions
DO
NOT
use
power
sources
other
than
that
specified
.
_
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK
The lighting flash with an arrowhead symbol, within an equilateral triangle is
Intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons____________________________________
The exclamation point within an equilateral triangle is intended to alert the user
in the literature accompanying the appliance__________________
INFORMATION -This equipment has been tested and found to company with
limits for a class a digital device Pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
Interference When the equipments operated in a commercial environment.
This equipment generates, uses, and Can Radiate radio frequency energy and
if not installed and used in accorda nce with the instruction manual, may Cause
Harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which
Case the user will be required to correct the interference at his own expense.
WARNING – Change or modification not expressly approved by the manufacturer could void
the user’s authority to operate the equipment__________________________________
CAUTION : To prevent electric shock and risk of fire hazards.
DO NOT expose this appliance to rain or moisture.000
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL._______________
_____
This installation should be made by a qualified service person and should conform to all local codes.
Contents
Package Contents
Precautions
Camera Installation
Internal Components
Features
OSD
3
4
5
6
8
9
1
Operating Your Camera
SHUTTER SPEED CONTROL
SET UP
SET UP LENS
BACK LIGHT
AUTO GAIN (AGC)
WHITE BALANCE
CAMERA TITLE
MIRROR
DAY/NIGHT/SYNC
MOTION DETECTION
PRIVACY
GAMMA
RESET
ADJUST
EXIT
Specifications
10
10
10
10
10
11
11
12
12
12
12
13
13
13
13
14
Dimensions
Warranty
15
16
2
PACKAGE CONTENTS
• Please make sure that the following items are included
in the package:
1 CVC6146SCS SeriesCamera
2 Mounting Screws
1 Video test Connector
Please leave this manual with the end-user for future
reference.
COMPATIBILITY
“A” type Box
Electrical Box is not included in the package but
Is compatible with the camera
3
DFM Series
PRECAUTIONS
PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN
• THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY
QUALIFIED PERSONNEL
• TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE
PROPER POWER CABLE
• THE DOME COVER SHOULD BE TREATED WITH CARE. DO
NOT CLEAN THE COVER WITH AN ABRAISIVE CLEANING
MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO
CLEAN THE DOME COVER
• THERE ARE NO USER-SERVICEABLE PARTS INSIDE.
TO MAKE INITIAL ADJUSTMENTS
• PLEASE USE A UL APPROVED REGULATED 24 VOLT AC OR
12 VOLT DC POWER SUPPLY
• PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE
TO PREVENT FIRE OR ELECTRICAL SHOCK
• PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
SUPPORT THE WEIGHT OF THE CAMERA
• PLEASE HANDLE THIS CAMERA CAREFULLY:
- DON’T USE A STRONG OR ABRASIVE DETERGENT WHEN
CLEANING THE CAMERA.
- DO NOT EXPOSE THE CAMERA TO DIRECT SUN
4
CAMERA INSTALLATION
CONNECT
CONNECT
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500 mA)
POWER INPUT:RED
CENTER:(+)
POWER SUPPLY
2. WHEN USING 24 VOLTS AC (20 Volt Amps)
-CONNECT ACCESSORY CABLE TO THE POWER JACK
AND CONNECT 24V AC TO THE LEAD
POWER RED(+)
BLACK:(-)
CONNECT
AC 24V
POWER SUPPLY
3. CONNECT VIDEO CABLE
-CONNECT BNC CABLE TO THE BNC JACK.
YELLOW:VIDEO OUT
5
INTERNAL COMPONENTS
(1) DC Auto iris Lens
angle (focal length) Set the focus by adjusting
∞
ÅÆ
N
1. Mechanical
(2) Joy Stick
Controller
(2.8~11mm)
(1) DC AUTO-IRIS LENS
Adjust between TÅÆW (TELE ÅÆ WIDE) to set the
NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED
INTO POSITION THROUGH THE USE OF "LOCKING HANDLES".
(2) JOY STICK
TO SET THE OSD (ON SCREEN DISPLAY) , PRESS THE JOY
STICK FOR ONE SECOND AND SET AS DESCRIBED
IN THE MANUAL
6
INTERNAL COMPONENTS
LEFT
Push the Joy stick for one second, and the OSD appears
2. Joy Stick
Video Test Terminal
DOWN
OSD Joystick Switch
UP
SET
RIGHT
on the screen. Move the Joy Stick up, down, left & right to
control the OSD functions.
7
Features
High Resolution
picture in low light conditions
BLC
When the image is in front of strong background lighting,
your camera allows you to get a clear image.
Horizontal resolution of 540 TV lines is
achieved by using a SONY Double Speed CCD with
410,000 pixels, yielding pictures with a high S/N ratio.
OSD
All camera functions are menu driven for easy use.
ELECTRONIC DAY/NIGHT
The camera can show color pictures in all lighting
conditions, or you can have it automatically switch to a B/W
Motion Detection
Built in motion detector with adjustable areas of coverage will
flash a warning on the screen when motion is detected.
8
Operating your camera
A
A
ATWA
A
T
OSD Function
LENS
DC MAN UAL
SHUTTER
UTO FLK FIXED MAN UA L
BLC
OFF ON
GC
OFF ON
WHITE BAL.
WB FIXED MAN UA L
FUNCTION
RETURN
CAMERA ID
ON
MIRROR
DAY / NIGHT
MOTION DET
PRIVAC Y
GAMMA
LANGUAGE
RESET
DJUS
CONTRAST
SHARPN ESS
CB_GAIN
CR_GAIN
RETURN
RETURN
OFF
ON OF F
COLOR AUT O B/W
ON OFF
ON OFF
0.05~1. 00
ENGLISH
한국어 汉语 漢語 日本 語
USER
9
Operating your camera – SETUP
<ON / OFF>
1) LENS
<DC / MANUAL>
Selects Lens Type.
2) SHUTTER
<AUTO / FLK / FIXED / MANUAL
Adjusts shutter settings.
Flicker-less mode (FLK) reduces on-screen flickering.
Electronic Shutter Control (AUTO) adjusts brightness level on screen.
Manual mode allows you to adjust the shutter speed
from1/60~1/120,000 of a second (NTSC), or 1/50~1/100,000(PAL).
FLK is the only option available when the camera lens is set to the
recommended DC mode.
3) BLC
<ON / OFF>
Provides light level control to overcome severe
backlighting conditions.
4) AGC
>
Adjusts value of AGC gain. Increase the GAIN level to brighten the
picture. (noise / distortion may develop)
10
5) WHITE BAL
<ATC / AWB / FIXED / MANUAL>
Auto White Balance Control (AWC) automatically adjusts
Return to the main SETUP menu.
Return to the main SETUP menu.
Controls color on the screen.
Select Auto Tracking White Balance (ATW) when the color
temp. is 2400°K~12000°K (for example when under a fluorescent
light or outdoors).
Manual mode allows you to increase or decrease the red
or blue factor on screen.
the white balance to your specific environment.
6) FUNCTION
(6-1) RETURN
(6-2) CAMERA ID
<OFF / ON>
.
Display a name and/or
number on the monitor.
To add a camera title:
CAMERA ID : Select character by moving joystick up and
C = Delete the entire name and start again.
POSITION = Position the camera title on the screen.
down.
Push down the button to set the position.
111
(6-3) MIRROR
<ON / OFF>
Produce a horizontal mirror image on screen.
(6-4) DAY / NIGHT
<AUTO / COLOR / BW>
AUTO = Automatically detect color or black/white.
Delay – When the Day & Night function starts or stops (0~15sec)
Start Level –Set the brightness level where the Day & Night
function start to operate
End Level – Set the brightness level where the Day & Night
function stops operate
COLOR = Full time color mode
B/W = Full time B/W mode
(6-5) MOTION DET
<ON / OFF>
AREA = Select motion detection area.
MOTION TH = Select low luminous motion threshold value.
MOTION TRACE = Display motion trace.
(6-6) PRIVACY
<ON / OFF>
12
AREA SEL = Select a motion detection grid (top left, top ,right, bottom left,
<ON / USER>
Adj
AREA STATE = Activate or deactivate the selected grid.
LEFT/RIGHT/TOP/BOTTOM = Alter the dimensions of the selected grid.
COLOR = Select color of privacy area.
(6-7) GAMMA
Sharpen the image on screen.
Excessive sharpening may cause picture noise.
(6-8) LANGUAGE (English / 한국어 / 汉语/漢語 / 日本語)
Choose language that should be displayed.
(6-9) RESET
Restore all factory default settings.
ADJUST
7)
ust level of sharpness / contrast / CB_Gain /
CR_Gain.
bottom right) to modify.
8) EXIT(SAVE)
Save OSD settings and exit the SETUP menu.
1311
SPECIFICATIONS
,
,p
A
ON / OFF (4 Prog rammable Zone)
PRIVAC Y Func ti on
ITEM
Power Source
Imag e Sensor
Effecti ve Pixels
Maximum Aperture Ratio
Scanni ng System
Video Output
Resolution
Back Lig ht Compensation
Gain Contr ol
Electr ic Shutter Speed
WHITE BALANC E
Min. Il l umination
S/N ( Y sig nal)
Motion Detecti on
CVC6146SCS Series
DC 12V & AC24V ( Dual Voltag e)
1/3”, SONY SUPER H AD CC D ,
410
000 pixels
755(H) x 582(V) , 1/3” CCD
1 : 1.3 ~ 2.0
2 : 1 Inter laced 525 Li nes / 60Fi elds / 30F r ames
1.0V [p- p] Composite, 75
540 TV Li ne
UTO / OFF
ON / OFF
1/50 ~ 1/100,000 s ec
W-ATW / FIXED / AWB / MANU AL
0.3Lux (F 1.3)
50dB (Weig ht On)
MD64 / OF F
Ω
On Screen Dis pl ay
Oper ati onal Temperatur e
Oper ati onal H umidi ty
Built - in
-10℃ ~ +50℃ (14℉ ~122℉)
30% ~ 90% R H
14
* SIDE VIEW
* TOP VIEW
DIMENSIONS
15
WARRANTY
16
MEMO
200 New Highway
Amityville, NY 11701
631-957-8700
www.specotech.com
Rev. 100125
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice
and without incurring any obligation.
Loading...