Speco Technologies CLPR67H User Manual

! ITEM №: CLPR67H

! Adjustable function

1. Resistor A: If you want to change the intensity of the IR light, please open

the back cover. And you can adjust it in the tail of the box camera( the

following picture is for your reference)

2. Resistor B: If you want to change the working time of IR Led, please open

the back cover. And you can adjust the working time in the tail of box

camera (the following picture is for your reference).” – “refers to the IR LED

will start working under the darker situation. “+” refers to the IR LED will

start working under the brighter situation.

! Packing

1. Camera X1

2. User Manual X1

3. Screw X3

4. Metal-Conical-Anchor X3

5. Adaptor X1

6. Hexagonal Wrench X3

7. Mounting drawing paper X1

! Specification

ITEM

CLPR67H

IP Rating

IP66

Type

Monochrome

Signal System

NTSC/PAL

Pick Up Device

1/3" 960H CCD

Picture Elements

NTSC:1020H×508V PAL:1020H×596V

Resolution

700 TVL

LED

8Pieces Super High Power LED

Vertical Frequency

NTSC:60Hz;PAL:50Hz

Horizontal Frequency

NTSC:15.734KHz PAL:15.625KHz

Clock Frequency

NTSC/PAL:36MHz

Scanning System

2:1 Interlace

S/N Ratio

≥52dB

Lens

5-50mm Varifocal Auto Iris IR Lens

Video Out-put

1V p-p,75Ω

Power Supply

DC12V±10%

Current Consumption

1500mA (with heater and fan)

Recommend Working Distance

5-30M （16.3-98.3ft）

Dimension

492×140×260mm （19.37”×5.5”×10.24”）

Weight

2520g (88.8oz)

Storage Temperature

-30～+60 (-22～+140)

Operating Temperature

-30～+40 (-22～+104)

Remark: Non-regulative adaptor may cause camera damaged.

License Plate Capture Camera

! Caution for Installation

1. Please do not install the camera where the vibration always happens, or the

camera will be damaged.

2. Please keep the glass in front of the camera clean. Do not touch it directly.

You can use a soft cloth with alcohol to wipe if necessary.

3. The available IR range of this camera is shown in the specification. Please

be sure to place the camera in the working distance when it works.

4. In order to prevent short circuit, please do not loosen any screws in the

camera at random.

5. Please do not let the camera work in the conditions which is beyond the

most extreme and demanding of operating conditions and climates shown

in the specification. When any abnormalities happen, please turn off the

camera and contact your local dealer or us right away.

Pay attention to the setting angle. The picture in the right is for your

reference.