Speco Technologies CILT00T6B, CILT00T6W User Manual
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
Intense Light Miniature Turret Camera
CILT00T6B
CILT00T6W
1 | Speco Technologies 2 | Speco Technologies
1. Precautions
Do not install the camera in
extreme temperature conditions.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
Never keep the camera pointed
directly at strong light.
Do not install the camera under
unstable lighting conditions.
Severe lighting change or flicker can
cause the camera to work improperly.
Do not drop the camera or subject
it to physical shocks.
Do not touch the front lens of the
camera.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
Do not expose the camera to
radioactivity.
CAUTION : To prevent electric shock and risk of fire hazards:
☞Do NOT use power sources other than those specified.
This installation should be made by a qualified service person and
should conform to all local codes.
2. Safety Instructions
Precautions for use
•
This camera should be installed by qualified personnel only
•
There are no user serviceable parts inside
•
Do not disassemble this camera other than to make initial adjustments
•
Use a UL approved regulated 12 volt DC power supply
•
Use appropriate low voltage power cable to prevent fire or electrical shock
•
Please insure that your installation area can support the weight of the camera
Please handle this camera carefully
•
Do not use a strong or abrasive detergent when cleaning the camera
•
Do not install near cooling or heating device
It can cause malfunctions to occur. If exposed to radioactivity the CCD
Severe lighting change or flicker can
cause the camera to work improperly.
will fail.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.
3 | Speco Technologies 4 | Speco Technologies
*2.5mm Fixed Board Lens
3. Dimension
1.88"dia 1.88"dia
1.45"
4. Key Features
• 5th Generation DSP Chip
• 1/3” Sony Super HAD CCD II
• No Noise, Ghosting Effect with DNR
• Highest Resolution : Vivid Sharp Picture in Completely Darkness
5. Specifications
MODEL
Sensor
TV System
Total Pixels
Effective Pixels
Scanning System
Synchronization
Resolution
S/N(Y signal)
Minimum Illumination
White Balance
Electronic Shutter Speed
SENS-UP
Gain Control
3 DNR
D&N Selection
Power Supply
Power Consumption
Lens
Operational Temp.
Storage Temp.
Dimension
Weight
1/3” Sony Super HAD CCD ll
NTSC, PAL
NTSC=811(H) * 508(V) / PAL=795(H) * 596(V)
NTSC=768(H) * 494(V) / PAL=752(H) * 582(V)
2:1 Interlace
Internal
600TV Lines
52dB(AGC Off, Weight On)
0.00001Lux
ATW
Auto(1/50sec, 1/60sec ~ 1/100,000sec)
On
Middle
On(1 ~50 Level Adjustable)
Auto
DC 12V
120mA
2.5mm Fixed Board Lens
-4~140F. RH 95% Max.
-4~140F. RH 95% Max.
1.88"(Dia) * 1.45"(H)
0.66lbs
CILT00T6B / CILT00T6W
* Notice
• This camera comes with a pinhole lens.
Because of this, the camera may have a small section in the corner of the image
that is covered.
This is a normal appearance for a wide, pinhole lens.
5 | Speco Technologies
Speco Technologies
6. Cable Connection
7. Camera Connection
9,'(2\HOORZ
%1&
32:(5UHG
'&9
3RZHU 9LGHR6LJQDO
3RZHU
32:(5
9LGHR*1'
9,'(2
6 | Speco Technologies
2.5mm Fixed Board Lens
7 | Speco Technologies
8 | Speco Technologies
Loading...