Speco ZIPKIT4D1 Series, ZIPKIT User Manual

User Guide (Ver. 1.2)

Models: ZIPKIT4D1

Network Video Recorder and IP Camera

About This User’s Guide

Before operating the unit, please read this user’s guide thoroughly and retain it for future reference.

Cautions

Explanation of Graphical Symbols

WARNING

To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.

CAUTION

Changes or modifications not approved by the manufacture will void the warranty of the product.

Using an incompatible battery may increase the risk of fire or explosion.

Replace only with the same or equivalent type battery recommended by the manufacture.

Discard used batteries according to manufacturer’s instructions.

This symbol indicates the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the product.

This symbol indicates the presence of “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to constitute a risk of electric

shock, property damage, personal injury, or death.

These precautions must be followed for safety reasons

Warning

 Do not use if the unit emits smoke.

 Do not disassemble the unit.

 Do not place any heavy or sharp objects on the unit.

 Do not place on uneven surface.

 Do not expose to shock or vibration.

 Do not move the unit when the unit is powered on.

 Do not block, and allow dust to accumulate in the air vents.

 Do not restrict airflow of the unit; doing so can damage the unit.

 Only qualified and experienced personnel should perform installation and

servicing.

 Turn off the power of the ZS when connecting Cameras, Audio or Sensor

Cables.

 The manufacturer is not responsible for any damage caused by improper use

of the product or failure to follow instructions for the product.

 The manufacturer is not responsible for any problems caused by or resulting

from the user physically opening the ZS for examination or attempting to repair

the unit.

 For ZS models with the PoE Switch, it is strongly recommended that the 48V

connector is inserted to the PoE Switch before the AC cable is attached to the

adaptor.

Product Components

Please make sure the following components are included as specified below.

Desktop:

NxZS

Bundle IP Camera(PoE) 4 EA

Remote Control

Battery 1.5V (AAA x 2 EA)

Quick Setup Guide &

User Guide

Mouse for NxZS

Software & Manual CD

Power Adaptor

(DC12V 5A for NxZS)

& Power cable (110V or 220V)

Power Adaptor

(DC48V 1A for POE)

& Power cable (110V or 220V)

Specifications

MODEL N4ZS N8ZS(TBD)

Video

Input

IP Cameras 4 8

Max Bit Rate 20Mbps 40Mbps

Resolution Max. 1920x1080

Output

Main Monitor VGA and HDMI

Sub Monitor CVBS (BNC)

Audio

Input

IP Cam Audio 4 8

RCA Input 4 4

Output RCA Output 1

Audio Codec G.711

Event

Sensor In

IP Cam Sensor 4 8

Local Input 4 (Terminal Block)

Local Alarm Output (T erminal Block) 1

IP Camera Motion Detection Yes

Serial

RS-232C Yes

RS-485 Yes

Network

Private (IP Camera, Auto Connection) 4 Port PoE 8 Port PoE

LAN (Remote Access, IP Camera) 10/100 Base-T 10/100 Base-T

Protocols TCP/IP, UDP, DHCP, HTTP, NTP, SMTP, RTP, RTSP

Recording

Compression H.264 (Baseline, Main, High Profile)

Resolution & Frame Rate

D1 120fps 240fps

1280x720 120fps 240fps

1920x1080 120fps 240fps

Recording Mode Continuous / Motion / Sensor / Schedule / Manual

Pre Recording Max. 20 Minutes

Post Recording Max. 60 Seconds

Playback

Search Quick Search, Date/Time, Event, Archive, Log

Multi-Decoding 1, 4 1, 4, 8

Playback Speed x0.25, x0.5, x2, x4, x8, x16, x32, x64

Backup

Media USB drive, External HDD, Network(via USB)

File Format BMP, AVI, Proprietary Format

Large Backup Yes (Max. 24 hours)

Storage

HDD

1 HDD Max Size 3TB

Internal HDDs 1

USB

Front 1

Rear 1

User I/F Input Method IR, Mouse, Keyboard Controller

Features

Dynamic DNS Yes (Free Speco DDNS)

Digital Zoom Yes

DLS (Day Light Savings) Yes

NTP (Network Time Protocol) Yes

S.M.A.R.T. Yes

Internal Beep Yes

Multi-Language Yes

e-mail Notification Yes

Network

Access

3G Mobile iPad / iPhone / Android

Web Viewer Windows (IE, Chrome, Firefox, Safari), MAC(TBD)

PC Client Single / Multi Client and CMS (64 channels)

Remote Setup and Upgrade Yes

Power Power Supply Voltage DC12V 5A & DC48V 2A

Temperature

Operating Temperature 41°F ~ 104°F (5°C ~ 40°C)

Storage Temperature 14°F ~ 122°F (-10°C ~ 50°C)

Weight Desktop Unit Weight (Gross weight)

Approximately 12 lbs

Dimension Unit Dimension (W x D x H) 13.5”W x 10.3”D x 2.5”H

Please note that specifications and unit exterior design are subject to change without notification.

Table of Contents

1. Main Features ............................................................................................................................. 10

2. Initial Boot-up Process .................................................................................................................. 11

2-1. Initial Boot up and Basic Time Setup ..................................................................................... 11

2-2. Setting up Daylight Savings Time .......................................................................................... 12

2-3. Setting NTP (Network Time Protocol) .................................................................................... 13

2-4. EZ SETUP ............................................................................................................................ 16

2-5. PoE Port SETUP ................................................................................................................... 19

2-6 . IP Camera SETUP (through SpecoTech Web Viewer) .......................................................... 20

2-7 . Dual Streaming ..................................................................................................................... 21

3. Front and Rear Panels ................................................................................................................ 22

3-1. Desktop Front Panel ............................................................................................................. 22

3-2. Connectors ........................................................................................................................... 22

3-3. Remote Control ..................................................................................................................... 23

4. Setting up the ZS ......................................................................................................................... 24

4-0. Setup – Main Live Screen ..................................................................................................... 24

4-1. Setup – IP CAMERA ............................................................................................................. 25

4-1-1. SCAN Menu ....................................................................................................................... 27

4-2. Setup – SYSTEM .................................................................................................................. 28

4-3. Setup – RECORD Mode ....................................................................................................... 32

4-4. Setup – DEVICE Mode ......................................................................................................... 34

4-4-1. Digital Deterrent ................................................................................................................. 36

4-5. Setup – DISPLAY Mode ........................................................................................................ 37

4-6. Setup – NETWORK Mode..................................................................................................... 38

4-6-1. Network Types ................................................................................................................... 39

4-6-2. DDNS ................................................................................................................................ 39

4-6-3. Network Port and Web Port................................................................................................ 40

4-7. Setup – USER MANAGEMENT Mode ................................................................................... 41

4-8. Setup – STORAGE Mode ..................................................................................................... 43

4-9. Setup - CONFIG Mode .......................................................................................................... 45

4-9-1. Firmware Upgrade ............................................................................................................. 46

5. Live, Search and Playback .......................................................................................................... 47

5-1. Live View .............................................................................................................................. 47

5-1-1. PTZ Control ....................................................................................................................... 51

5-2. Digital Zoom in Live and Playback Screen ............................................................................ 52

5-3. SEARCH Screen ................................................................................................................... 52

5-3-1. EZSearch ........................................................................................................................... 53

5-3-2. Time Line Search ............................................................................................................... 54

5-3-3. Event Search ..................................................................................................................... 54

5-3-4. Go To First Time................................................................................................................. 55

5-3-5. Go To Last Time ................................................................................................................. 55

5-3-6. Go To Specific Time ........................................................................................................... 55

5-3-7. Archive List ........................................................................................................................ 55

5-3-8. Log List .............................................................................................................................. 56

5-4. Play Mode ............................................................................................................................. 56

6. Back Up ........................................................................................................................................... 58

6-1. Video Backup onto USB Flash Drive during playback ........................................................... 58

6-2. EZCopy: Video Backup onto USB Flash Drive during playback............................................. 59

6-3. Transferring Still Images or Video from the ARCHIVE List ..................................................... 60

6-4. Playback of Backup Video ..................................................................................................... 61

6-5-1. AVI Format ......................................................................................................................... 61

6-5-2. NSF Format ....................................................................................................................... 61

7. Network Access Using the Multi-Sites Network Viewer .................................................................... 62

7-1. Overview ............................................................................................................................... 62

7-2. PC Requirements .................................................................................................................. 62

7-3. Installation of the Program .................................................................................................... 63

7-4. Live Window.......................................................................................................................... 64

7-4-1. Main User Interface ............................................................................................................ 64

7-4-2. Control Buttons .................................................................................................................. 64

7-5. Search and Playback Window ............................................................................................... 65

7-5-1. Main User Interface ............................................................................................................ 65

7-5-2. Main Control Panel ............................................................................................................ 66

7-6. Setup of SpecoTech Multi Client ............................................................................................ 67

7-6-1. General .............................................................................................................................. 67

7-6-2. Event ................................................................................................................................. 68

7-6-3. Record ............................................................................................................................... 69

7-6-4. Display ............................................................................................................................... 70

7-6-5. Language ........................................................................................................................... 71

7-6-6. About ................................................................................................................................. 71

7-7. Remote Setup ....................................................................................................................... 72

7-7-1. IP Camera.......................................................................................................................... 73

7-7-2. System ............................................................................................................................... 74

7-7-3. Record ............................................................................................................................... 76

7-7-4. Device................................................................................................................................ 77

7-7-5. Display ............................................................................................................................... 78

7-7-6. Network ............................................................................................................................. 79

7-7-7. User Management ............................................................................................................. 80

7-7-8. Storage .............................................................................................................................. 81

7-7-9. Remote Upgrade................................................................................................................ 81

7-7-10. Information ....................................................................................................................... 81

7-8. Operation via SpecoTech Multi-Client Viewer Software ......................................................... 82

7-8-1. Addition, Delete, and Modify ZS Sites ................................................................................ 82

7-8-2. Connect and Disconnect .................................................................................................... 84

7-8-3. Still-Image Capture During Live.......................................................................................... 85

7-8-4. Recording Video on Local PC During Live ......................................................................... 85

7-8-5. Local Playback and Remote Playback ............................................................................... 87

7-8-6. AVI Backup during Playback .............................................................................................. 89

7-9. ZIP IP Camera Setup ............................................................................................................ 91

7-9-1. Live View ........................................................................................................................... 91

7-9-2. Video ................................................................................................................................. 92

7-9-3. Security .............................................................................................................................. 92

7-9-4. Event ................................................................................................................................. 93

7-9-5. Network ............................................................................................................................. 93

7-9-6. System ............................................................................................................................... 94

8. Network Access Using SpecoTech Web Viewer ................................................................................ 96

9. Network Access Using the Smart Phone Viewer .............................................................................. 98

9-1. App Viewer for iPhone ........................................................................................................... 98

9-1-1. Live .................................................................................................................................... 98

9-1-2.PTZ Control ...................................................................................................................... 100

9-1-3. Playback .......................................................................................................................... 100

9-2. App Viewer for Android Phone............................................................................................. 101

9-2-1. Live .................................................................................................................................. 101

9-2-2. Playback .......................................................................................................................... 102

9-2-3. PTZ Control ..................................................................................................................... 103

APPENDIX: Network Connection - LAN ..............................................................................................103

APPENDIX: Network Connection – Internet and DDNS ......................................................................106

1. Main Features

 Automatic IP Camera Detection and connection (Plug & Play)

 Easy Record, Copy and Setup

 Easy Search by Thumbnail Preview

 Easy Copy

 Easy Network

 Easy IP Camera Setup

 Individual Channel Operation

 Covert camera operation provides enhanced security and administrator control

 Dynamically programmable recording priority, motion detection, alarms and scheduling

 Simple and Easy Graphic User Interface

 Simple Scheduler

 HDMI Output

 VGA Output

 Password to secure installation authorization

 Network software supports 10/100Mbps

 USB 2.0 port for video clip exporting and easy firmware upgrade via USB Flash Drive

NOTE: Under federal law, The Fourth Amendment to the U.S. Constitution, Title III of the Omnibus Crime

Control and Safe Streets Act of 1968, as amended by the Electronic Communications Privacy Act of 1986 (18

U.S.C. § 2510, et seq.), and the Foreign Intelligence Surveillance Act of 1978 (50 U.S.C. 1801, et seq.)

permit government agents, acting with the consent of a party to a communication, to engage in warrantless

interceptions of telephone communications, as well as oral and electronic communications.

2. Initial Boot-up Process

2-1. Initial Boot up and Basic Time Setup

1. During the first boot up, the following logo will be displayed.

2. After the logo, select the language and set date and time as specified below.

(EZ Setup Page Reference / Page.16~18)

2-2. Setting up Daylight Savings Time

To enable Daylight Saving feature/NTP synchronization, take the following steps.

1. Enter the SETUP mode. The default Username is “ADMIN” and Password is “1111”.

2. Go to SETUP > SYSTEM > DATE & TIME SETUP

3. Select ON from the DAYLIGHT SAVING dropdown menu.

2-3. Setting NTP (Network Time Protocol)

1. SETUP > SYSTEM > NTP SETUP > ON

2. Select the proper TIME ZONE time.

Table2.3.1. GMT Time Zone

State Standard Time Daylight-Saving Time

AL Alabama GMT-6 GMT-5

AK Alaska GMT-9 GMT-8

AK Alaska (Aleutian Islands) GMT-10

AZ Arizona GMT-7

AZ Arizona (Navajo) GMT-7 GMT-6

AR Arkansas GMT-6 GMT-5

CA California GMT-8 GMT-7

CO Colorado GMT-7 GMT-6

CT Connecticut GMT-5 GMT-4

DC District of Columbia GMT-5 GMT-4

DE Delaware GMT-5 GMT-4

FL Florida GMT-5 GMT-4

FL Florida (W) GMT-6 GMT-5

GA Georgia GMT-5 GMT-4

HI Hawaii GMT-10

ID Idaho (N) GMT-8 GMT-7

ID Idaho (S) GMT-7 GMT-6

IL Illinois GMT-6 GMT-5

IN Indiana GMT-5 GMT-4

IN Indiana (SW / NW) GMT-6 GMT-5

IA Iowa GMT-6 GMT-5

KS Kansas GMT-6 GMT-5

KS Kansas (W) GMT-7 GMT-6

KY Kentucky (E) GMT-5 GMT-4

KY Kentucky (W) GMT-6 GMT-5

LA Louisiana GMT-6 GMT-5

ME Maine GMT-5 GMT-4

MD Maryland GMT-5 GMT-4

MA Massachusetts GMT-5 GMT-4

MI Michigan GMT-5 GMT-4

MI Michigan (W) GMT-6 GMT-5

MN Minnesota GMT-6 GMT-5

MS Mississippi GMT-6 GMT-5

MO Missouri GMT-6 GMT-5

MT Montana GMT-7 GMT-6

NE Nebraska GMT-6 GMT-5

NE Nebraska (W) GMT-7 GMT-6

NV Nevada GMT-8 GMT-7

NH New Hampshire GMT-5 GMT-4

NJ New Jersey GMT-5 GMT-4

NM New Mexico GMT-7 GMT-6

NY New York GMT-5 GMT-4

NC North Carolina GMT-5 GMT-4

ND North Dakota GMT-6 GMT-5

ND North Dakota (W) GMT-7 GMT-6

OH Ohio GMT-5 GMT-4

OK Oklahoma GMT-6 GMT-5

OR Oregon GMT-8 GMT-7

OR Oregon (E) GMT-7 GMT-6

PA Pennsylvania GMT-5 GMT-4

RI Rhode Island GMT-5 GMT-4

SC South Carolina GMT-5 GMT-4

SD South Dakota (E) GMT-6 GMT-5

SD South Dakota (W) GMT-7 GMT-6

TN Tennessee (E) GMT-5 GMT-4

TN Tennessee (W) GMT-6 GMT-5

TX Texas GMT-6 GMT-5

TX Texas (W) GMT-7 GMT-6

UT Utah GMT-7 GMT-6

VT Vermont GMT-5 GMT-4

VA Virginia GMT-5 GMT-4

WA Washington GMT-8 GMT-7

WV West Virginia GMT-5 GMT-4

WI Wisconsin GMT-6 GMT-5

WY Wyoming GMT-7 GMT-6

NOTE: If you want the unit to automatically synchronize the local time, the Time Zone must be properly set according to your local time zone.

2-4. EZ SETUP

Quick installation Menu for ZS and IP Camera Easy installation(Right-Click on the Main Screen)

Figure 2.4. EZ Setup Screen

2.4.1. Setup DATE & TIME, IP CAMERA configurations.

Figure 2.4.1. EZ CAMERA Setup Procedure

① Select EZ Camera for Date/Time and Camera Setup, Click NEXT to proceed.

② Description of EZ Camera Setup is displayed, Click NEXT to proceed.

③ Set up the Date/Time settings and click NEXT to get to the camera setup.

④ Configure individual cameras in the EZ Camera Setup.

 Select the Channel to configure.

 Select the Camera Manufacturer and then click on the scan button; this will scan the

networks for any cameras from the particular manufacturer.

 Select the desired Camera from the list, and then click on register.

 If necessary, click on Preview to Preview the camera, or Setup to change camera settings.

1 2

3 4

2.4.2. EZ NETWORK (Using an internet connection)

Figure 2.4.2. EZ NETWORK Setup Procedure

① Select YES in case of setting the network using an internet connection.

② Select Auto Configuration(DHCP) or Manual Configuration(STATIC) and then click TEST

Button. It will automatically setup the network for the system.

③ Setup DDNS setting. DDNS(Dynamic Domain Name System) allows a DNS name to be

constantly synchronized with a dynamic IP address. It allows using a dynamic IP address to be

associated with a static domain name. Refer to the full version manual for more information.

④ Click Finish to save the setup.

1 2

4 5

2.4.3. EZ NETWORK setting (Not using internet connection)

Figure 2.4.3. EZ NETWORK Setup – Manual Configuration Screen

① Select NO if the ZS is not using an internet connection.

② Select Auto Configuration(DHCP) or Manual Configuration(STATIC) and then click TEST

button when ready.

③ Input the Network Settings if Manual Configuration(STATIC) was selected, and click TEST

④ Select OFF for ENABLE DDNS and click NEXT button.

⑤ Click Finish to save the setup.

4 5

1 2 3

2-5. PoE Port SETUP

Figure 2.5. PoE Port (N4ZS/N8ZS(TBD))

2.5.1 Connecting the Camera

Figure 2.5.1. IP Camera Connection Diagram (N4ZS)

Table 2.5.1. Factory Default of the IP Camera

The following IP Camera settings are recommended for optimal connection with the ZS Series

Setup Items Default Description

Network Type DHCP

The IP Camera must act as a DHCP client for the “Plug and Play”.

Encoding Type CBR

The “CBR” is recommended because of the internal buffer strategy of the ZS.

Dual Streaming General Sub Stream must be turned on.

The compression type of both Main and Sub stream must be H.264.

Main 1920x1080@30fps, 5Mbps

(Max. throughput of the N4ZS/ N8ZS is 20Mbps)

Sub D1@30fps, 1Mbps

Audio G.711 Only G.711 is supported

 The ZS Series features a "Plug and Play" function with a PoE Switch.

 The “Plug and Play” functionality requires the IP Camera to be in DHCP mode.

 The ZS automatically assigns an IP Address to the IP Camera. (192.168.78.11 ~ 254)

 The ZS models will automatically map the camera on the PoE Port to the corresponding ZS

channel number.

Figure 2.5.2. Incorrect connection with the PoE Ports

With the ZS Models, it is prohibited to connect a router to the POE Ports to connect the IP Camera,

the ZS will not be able to find and connect to the camera. The LAN Port can be connected to a

router, but not the PoE Ports.

2-6 . IP Camera SETUP (through SpecoTech Web Viewer)

ZS Series allows remote access to the IP Cameras through "IP Camera Setup" menu in SpecoTech Web Viewer.

① Click the mouse right button

② Select “IP Camera Setup”.

③ Select Channel Number.

④ It launches the camera’s web setup page.

In order for the web pages to launch from the “IP Camera Setup” menu when accessed from the WAN, Ports 59011 to

59254 on the router must be port forwarded to the ZS. The local address of the ZS can be found in the system

information.

2-7 . Dual Streaming

 High Quality (Main Profile) Video Stream is used for both Recording and Live Display.

 High Quality (Main Profile) Video Stream can be viewed through the network, when selected.

 Normal (Secondary) Quality Video Stream is used by default when viewing through the network.

3. Front and Rear Panels

3-1. Desktop Front Panel

Figure 3.1.1. Desktop ZS Front panel

Table 3.1.1. Front LED and Port of ZS

Name Description

POWER LED light is on when power is applied to the system.

HDD LED light is on when the system is recording video data.

USB Port This USB port is for archiving footage into a USB device. (USB 2.0)

3-2. Connectors

Figure 3.2.1. Connectors

① Ground: Use for grounding.

② PoE POWER: DC48V input.(N4ZS Models)

③ PoE PORTS: N4ZS (4 Port PoE)

④ AUDIO IN/OUT: 4 Connectors for Audio Input / 1 Connector for Audio Output

⑤ CVBS OUT: MAIN – Composite Video Output.

⑥ HDMI OUT: HDMI output port, Connector to the HDMI Monitor, (1280x720, and 1920x1080).

⑦ VGA OUT: Connector for VGA Monitor, Main Video Output.

⑧ RS232C: Console Interface

⑨ USB PORT: Connector for USB Mouse or USB flash memory.

⑩ ETHERNET PORT1: RJ-45 Connector for LAN Connection, used for Internet Connection

⑪ SENSOR IN, ALARM OUT, RS-485: 4 sensor inputs, 1 alarm output and RS-485 for PTZ

⑫ POWER: DC12V input

 Do not power this system on before all the connections are completed.

 Make sure all the connections are properly secured. Faulty connection may result in

the system being damaged.

1 2 5 4 6 7

8 9 10

11 12

N4ZS

3-3. Remote Control

① ID: Used to set up the remote control ID.

② REC: To enable or disable manual recording mode.

③ SEARCH: Goes to SEARCH menu for playback options.

④ F/ADV:

 During Playback – Moves the playback forward by 60 seconds.

 During Pause – Moves the playback forward by 1 frame.

⑤ F/REW:

 During playback – Moves the playback backward by 60 seconds.

 During Pause – Moves the playback backwards by 1 frame.

⑥ FF: Increases playback speed (fast fowards).

⑦ PLAY/PAUSE: To play or to pause the recording in playback mode

⑧ REW: Plays video backwards (rewinds), additional selection increases backwards playback speed.

⑨ ESC:

 During Setup – Returns to the previous menu screen.

 During Playback – Exits playback mode.

 System lock – Locks the system when pressing ESC button for 5 seconds.

 System unlock – Unlocks the system when pressing ESC button for 5 seconds.

⑩ SETUP: Opens up the SETUP menu.

⑪ Direction buttons: Used to move menu items or select a channel.

⑫ SEQ: Starts auto sequence the screen when in full screen mode. (Toggle)

⑬ BACKUP: Start the backup operations in live or playback mode.

⑭ 0~9: Used to select channel (1,2,3,..) or to setup a ZS Remote ID.

4. Setting up the ZS

The following sections detail the initial setup of the ZS.

Menu screen will close if user input is not received within 5 minutes.

4-0. Setup – Main Live Screen

To enter the setup menu, right click on the mouse and select setup from the submenu or press the setup

button on the remote control.

Table 4.0.1. Live Screen and Quick Operation Window

When the ZS prompts the LOG-IN window, enter the PASSWORD using the virtual keyboard, or the front

panel, or the remote control. For ADMIN, the factory default password is 1111. It is highly recommended to

assign a new password to protect the system. User can assign a new password in SECURITY setup menu.

4-1. Setup – IP CAMERA

Press the SETUP button and enter the password. The IP Camera setup menu is displayed below.

Figure 4.1.1. IP Camera mode setup screen

Table 4.1.1. Menu items in IP CAMERA mode setup

Item Description

CHANNEL

To manually connect each camera, click on the to get this window:

Under the column labeled Type, Select IP Camera Manufacturer.

SCAN: Double click the empty box to search IP camera on the local network.

Double Click to Scan

IP: Enter the address of IP camera to connect, or select from scanned list.

PORT: Enter the port number of IP camera to connect

WEB PORT: Enter the web port number of IP camera to connect

OTHERS: Change the IP camera setting. Double click the empty box and

then Log-In box will be pop-up. (Enter ID and PASSWORD of IP Camera)

PROTOCOL Select the Brand of the Camera.

SCAN Automatic IP Camera Search the network. for IP Camera

IP Enter the IP Address of the desired Camera.

PORT Enter the Camera stream Port Number (default: 554)

WEB PORT Enter the Camera Web Port Number (default: 80)

ID Enter the User ID for access to the IP Camera

PASSWORD Enter the PASSWORD for the associated ID

SETUP IP Camera Video Setup( Resolution, Frame rate, and Bitrate)

4-1-1. SCAN Menu

Figure 4.1.2 IP CAMERA Setup Screen Figure 4.1.3 Search IP Camera Screen

① Select the specific manufacturer of IP Camera and then on click the scan button

② Select the camera on the list and then click the register button.

③ After the registration is completed, the basic information is to be displayed.

4-2. Setup – SYSTEM

In the SETUP menu, select the SYSTEM tab. Then, the SYSTEM menu is displayed as pictured below.

Navigate through the menu items or change the settings using the mouse or the remote control.

Figure 4.2.1. SYSTEM Setup Screen

Table 4.2.1. Menu Items in SYSTEM Setup Screen

Item Description

DESCRIPTION Press the button to view the system information. (Software Version, Storage Size, IP

Address, MAC Address and DDNS Status)

LANGUAGE

Select the display language using the mouse or the remote control. Once a language is

selected, the display language will change.

DATE

DISPLAY

FORMAT

Select the date display format using the mouse or the remote control. Options are:

MM/DD/YYYY, YYYY/MM/DD, DD/MM/YYYY, YYYY-MM-DD, MM-DD-YYYY, DD-MM-YYYY

DATE&TIME

SETUP

Select the display date and time using the mouse or the remote control and press OK

button to set the present date and time.

Select DAYLIGHT SAVINGS using the mouse or the remote control and select the

appropriate daylight savings time zone. The options are:

OFF: Daylight saving is turned off.

USA: Applies the USA daylight saving time.

EU: Applies the EU daylight saving time.

- Select the GMT AREA using the mouse or the remote control.

- Set the time difference with the standard time using the mouse or the button.

OTHERS: If the time zone is neither USA nor EU, set the date and time of the daylight

saving period.

- Select BEGIN or END.

Caution

- Do not set the start time to 23:00 for DLS.

- DLS cannot be applied if the date of BEGIN and END is the same.

CLIENT

ACCESS

Enable/Disable remote access through the network.

NTP

SETUP

NTP (Network Time Protocol) which synchronizes the time of the computer systems over

variable-latency data networks.

PRIMARY SNTP SERVER: Input the address of the primary NTP time-server.

SECONDARY SNTP SERVER: Input the address of the secondary NTP time-server.

TIME ZONE: NTP synchronizes with GMT (Greenwich Mean Time) regardless of

geography; user must select time difference from GMT.

CONNECTON MODE: Select the NTP time-server connection mode from TIME,

INTERVAL, and ONCE.

CONNECTION PERIOD

- TIME – Refresh the time at the designated time (e.g. 1AM)

- INTERVAL – Every 1 hour ~ 24 hours

- ONCE – Synchronizes time only once. NTP will not synchronize unless the

Connection Mode is changed.

ZS sends E-MAIL Notification when the NTP server time is faster than the system

time with below message.

“NTP server time is faster than the system time.

In this case, NTP server time is ignored to protect the user data.

User must set the time manually.

SYSTEM TIME: Mon Oct 10 13:46:49 2011

SERVER TIME: Mon Oct 10 13:33:12 2011

ZS ID: ZS

IP ADDRESS: 172.16.2.46”

SEND EMAIL

SERVER TYPE: Select GMAIL, HOTMAIL, AOL, YAHOO or MANUAL)

MAIL SERVER: Enter the appropriate mail server information.

MAIL PORT: Assign Mail Port number.

SECURE OPTION: Select the secure mail server connection method. (SSL or TLS)

ID: Enter the appropriate mail server ID.

PASSWORD: Enter the appropriate mail server PASSWORD

MAIL TO: Enter the appropriate email address to enable sending e-mail reports using a

virtual keyboard.

MAIL FROM: To set the email address sent to the destination host.

TEST : E-mail settings sent a test mail to the registered account

UNIT NAME Name the ZS (e.g. Factory)

This feature is to identify the name of the ZS under the same network.

SYSTEM

RESTART

Restart the system

SYSTEM

SHUTDOWN

Shut down the system

EZ SETUP Quick installation Menu for ZS and IP Camera Easy installation

+ 78 hidden pages

Speco ZIPKIT4D1 Series, ZIPKIT User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual