Speco VM17LED, VM19LED User Manual

Page 1
1
1DU00L5B-A.0
VM17LED – VM19LED
Page 2
2
1DU00L5B-A.0
1. Introduction and Package Contents
Introduction
Congratulations on your purchase. You can expect only the sharpest and most brilliant color images from this monitor. Featuring an easy to use OSD control and built in speakers, you will find this monitor both easy to use and a pleasure to look at.
Package Contents
One LED Monitor
12V DC Adapter
Power cord
D-Sub 15-pin VGA connector Cable
User's Guide
Hardware Installation
The following sections in this guide give clear, step-by-step descriptions of the installation process and explain how to use the monitor for optimum results.
Please pay attention to the Regulations and Warnings Section of this user’s manual before setting up the display monitor. Failure to do so may inadvertently result in personal injuries or machine damage.
Page 3
3
1DU00L5B-A.0
Specifications (VM17LED, VM19LED”)
Size
17”
19”
Composite Output
(BNC) x 2
Composite Input
(BNC) x 2
Single Connector
(VGA) x 1, (RCA) x 2 (PC Audio) x 1, (HDMI) x 1
Speaker
1.5W x 2
Display Mode
Video 1/ Video 2/ PC/ HDMI
AC power
AC 100~240V 50/60Hz
Temperature
Operation: 0°~40°C(32° ~104°F) , Storage: -10°~60°C(14° ~140°F)
Power Consumption
15W Max. in “ON” Mode
Under 3W in Power Saving Mode (100 Vac)
Under 5W in Power Saving Mode (240 Vac)
OSD Control
Picture Mode, Contrast, Brightness, Color, Tint, Sharpness,
Color Temp, DNR
OSD Languages
English, German, French, Italian, Spanish, Russian, Turkish,
Polish, Dutch, Czech
Auto Adjustment
Yes (Only for VGA mode)
De-interlace
Yes
Wall mount
Optional
Accessories
Adapter, Power code, Manual, VGA cable
Safety
UL, FCC, CE, ROHS
Tilt
-5°~15°
Humidity
10~90
Monitor scan
Microprocessor controlled
Pixel pitch
0.264x0.264mm
0.294x0.294mm
Pixel format
1280x1024
1280x1024
Response time
5ms
5ms
Color depth
16.7 Million Colors
Viewing angle
Vertical -80°~80°
Horizontal -85°~85°
Display area
(H x V)
13.3”x10.6”
14.8”x11.8”
Dimension
(W x H” x D”)
15.2” x 15.2” x 6.5”
16.7” x 16.3” x 6.5”
Weight
(monitor
only)
Plastic
Type
7.5 lbs
7.7 lbs
Metal
Type
14.3 lbs
15.7lbs
Page 4
4
1DU00L5B-A.0
VGA Timing
Item
Resolution
H Freq.(kHz)
V Freq.(Hz)
1
640x400@70
31.460
70.080
2
640x480@60
31.469
59.940
3
640x480@72
37.861
72.809
4
640x480@75
37.500
75.000
5
720x400@70
31.460
70.080
6
800x600@56
35.156
56.250
7
800x600@60
37.879
60.317
8
800x600@72
48.077
72.188
9
800x600@75
46.875
75.000
10
1024x768@60
48.363
60.004
11
1024x768@70
56.476
70.069
12
1024x768@75
60.023
75.029
13
1280x1024@60
63.981
60.020
14
1280x1024@75
79.976
75.025
Remark: The timings with presetting are recommended. Users have to adjust the timing manually if it is not included in the presetting list
Page 5
5
1DU00L5B-A.0
2 Monitor and OSD
Control
Monitor and OSD Control
The LED color monitor has a simple control layout for controlling the monitor and OSD (On Screen Display) functions. The table below summarizes the control keys and their related functions.
5-Key feature
Keys
Function Description
Power
Toggle the display between standby mode and on/off.
(Press “Power” and waiting 6 sec., monitor will be display )
Switch setting item. Increase the value of the chose item.
M
Enter the main menu of the on-screen display (OSD).
Switch setting item. Decrease the value of the chose item.
A
Switch mode “PC”, “AV1”, “AV2”, “HDMI”.
A
-
M
+
Power
6-Key feature
Keys
Function Description
Power
Toggle the display between standby mode and on.
(Press “Power” and waiting 6 sec., monitor will be display )
A / Auto
Automatically adjusts H-Position, V-Position, Pixel Clock
and Phase for an optimal image in PC mode only.
+
Switch setting item. Decrease the value of the chose item.
-
Switch setting item.
Increase the value of the chose item.
S / Select
Switch mode “PC”, ”AV1”, ”AV2”.
M / Menu
Enter the main menu of the on-screen display (OSD).
M S A
M
enu Select
-
+
Auto Power
Page 6
6
1DU00L5B-A.0
LED Status Display The following table describes the various power states of the LED
monitor as represented by different LED color.
Power State
LED Color
On
Green
Standby
Red
No power
Blank
Page 7
7
1DU00L5B-A.0
3 OSD Control Function List
OSD Menu
Picture Mode
1. Picture Mode
Press -/ OR +/ to select the picture mode User, Standard, Movie, Vivid ”
2. Contrast
This is used to set the brightness of the screen.
Press -/ OR +/ to adjust the parameter.
3. Brightness
This is used to adjust the image contrast. Press -/ OR +/ to adjust the parameter.
4. Tint
This is used to adjust the image Tint. Press -/ OR +/ to adjust the parameter.
5. Saturation
This is used to adjust the image saturation.
Press -/ OR +/ to adjust the parameter.
6. Sharpness
Adjust the sharpness. It makes the image become soft.
Press -/ OR +/ to adjust the parameter.
7. Color Temp.
Press -/ OR +/ to adjust the color tones. “ Cool , Warm , Normal “
8. DNR
Press -/ OR +/ to adjust the noise reduction. “High , Low, Off, Mid “
Note: VGA Mode: Contrast, Brightness, Color Temp., Auto Adjust.
Sound Mode
1. Volume
Press -/ OR +/ to adjust volume level.
2. Mute
Press -/ OR +/ to select sound “ Off, On ”.
Page 8
8
1DU00L5B-A.0
Setting Mode
AV/HDMI Mode
VGA Mode
1. Language
Press -/ OR +/ to select language.
2. H. Position
Move the display picture left or right.
Press -/ OR +/ to adjust the parameter.
3. H Zoom
Adjust the H-size of the display picture
Press -/ OR +/ to adjust the parameter.
4. V Position
Move the display picture up or down.
Press -/ OR +/ to adjust the parameter.
5. V Zoom
Adjust the V-size of the display picture
Press -/ OR +/ to adjust the parameter.
6. Clock
Press -/ OR +/ to adjust the parameter.
7. Phase
Press -/ OR +/ to adjust the parameter.
8. Scale Mode
Adjust the V-size of the display picture
Press -/ OR +/ to adjust “ Full, 16:9 ”.
9. Reset
Recall Default value.
Note: “ Clock” and “Phase ” setting only in VGA Mode
Page 9
9
1DU00L5B-A.0
PIP/POP Setup Mode
PIP
POP
1. Multi Window
Press -/ OR +/ to select “PIP, POP, Off ” mode.
2. Sub Source
Press -/ OR +/ to select “AV, VGA” mode.
3. Size
Adjust the size of Sub Source window.
Press -/ OR +/ to select “Large, Small, Mid ”
4. Position
Move the position of Sub Source window.
Press -/ OR +/ to select “L U, R D, R U, L R” position.
5. Border Color
Choose the border color of Sub Source window.
Press -/ OR +/ to select “Black, Blue” color.
6. Sound Source
Press -/ OR +/ to select “Main, Sub” mode.
7. Swap
Press S/Select to Swap the Source of Main and Sub.
Note:
1. AV1 and AV2 , HDMI and VGA cannot be displayed at the same time on the monitor in PIP / POP mode.
2. If POP mode is selected both images are scaled to fit the screen.
Page 10
10
1DU00L5B-A.0
4 Caring for Your LED Monitor
Caring for your LED Monitor
The LED color monitor is a sensitive piece of electronic equipment. Proper care can prevent accidentally damaging the LED panel or the monitor itself. By following these guidelines you can ensure many years of trouble free use.
1. The LED monitor's plastic casing and LED glass panel can be cleaned with a soft, lint-free cloth. Never use scrub pads or
other cleaning materials with abrasive surfaces to clean your LED monitor!
a. A slightly damp cloth or newspaper may be used to
clean the glass plate of fingerprints or smudges.
b. For the plastic case, a mild detergent may be used to
clean the surface. However, you should ensure not to use too much detergent or water as this could leak into the interior of the casing.
2. Do NOT use cleaning fluids based on alcohol, methylated spirit, or ammonia. The glass plate has a hard surface coating to prevent scratches. However, the use of strong chemical cleaning agents may damage this coating. Use only a mild soap or detergent and water or specially formulated cleaners made for cleaning glass panels.
3. Avoid direct contact with water or other liquids. Never use the LED monitor in or around areas where water may pose a potential hazard to normal operation.
4. Only use the LED monitor indoors, and avoid monitor contact with oil, vapor, steam, moisture and dust. The LED monitor should be used in a clean and low humidity environment.
5. Keep the LED monitor away from heaters or other heat sources such as lighting equipment or direct sunlight.
6. Keep the LED monitor away from sharp object to touch the screen like fingernail and pencil.
WARNING: Any unauthorized modification to this equipment could result in the revocation of the authorization to operate the equipment and void the product warranty.
Page 11
11
1DU00L5B-A.0
5 Frequently Asked Questions
Power button does not respond
Check the power cord to ensure that it is securely plugged
into the monitor base and also into the electrical outlet.
Ensure there is electrical power coming from the AC outlet.
Use another device to check for power.
Unplug the power cord of the monitor from the AC outlet,
wait a few minutes, then to plug the power cord into the AC outlet again. This will reset the monitor and power supply.
No image on the screen
Ensure that the DB-15 signal cable is properly connected to
the display card/computer.
Check the DB-15 signal cable connector on both ends for
bent or pushed-in pins.
The display card should be properly seated in its card slot.
Ensure that the computer's power switch is ON.
Ensure that the monitor's power switch is ON.
Unplug the power cord of the monitor from the AC outlet,
wait a few minutes, then to plug the power cord into the AC outlet again. This will reset the monitor and power supply.
Power LED is RED (with no image on the screen)
Check the DB-15 signal cable to ensure that it is properly
attached to the graphics display card.
Check the DB-15 signal cable on both ends for bent or
pushed-in pins.
Make sure the computer is not in a power-saving mode
(move the mouse or press a key on the keyboard).
No sound coming from the audio speakers
The audio cable should be connected to the lineout on the
audio card and the line-in on the monitor. Ensure that the audio cable is properly connected.
Inspect the audio cable for any apparent damage. Double
check by switching to another audio cable to see if the audio works.
Page 12
12
1DU00L5B-A.0
6 Regulations and Maintenance
FCC compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generation, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Precautions
Read all of these instructions and save them for later use.
Follow all warnings and instructions on the product.
Product
- Do not cover or block the vent holes in the case.
- Do not insert sharp objects or spill liquid into the LED monitor through cabinet slots.
They may cause accident fire, electric shock or failure.
- Disconnect the power plug from the AC outlet if you will not use it for an
indefinite period of time.
- Do not attempt to service this product yourself, as opening or removing covers
may expose you to dangerous voltage potentials or other risks.
- Do not touch the screen directly with your fingers. You may damage the screen,
and oil from your skin is difficult to move.
- Do not apply pressure to the screen. The LED is very delicate.
Power
Page 13
13
1DU00L5B-A.0
- Use the type of power indicated on the marking label.
Plugs
- Do not remove any of the prongs of the monitor’s three-pronged power plug.
- Disconnect the power plug from the AC outlet under following conditions:
If you will not use it for an indefinite period time.When the power cord or plug is damaged or frayed.If the product does not operate normally when the operation instructions are
followed. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.
If the product has been dropped or the cabinet has been damaged.If the product exhibits a distinct change in performance, indicate a need for
service.
Power and extension cords
- Do not allow anything to rest on the power cord.
- Do not locate this product where persons will walk on her cord.
- Use the proper power cord with correct attachment plug type. If the power
source is 120 V AC, use a power cord that has UL and C-UL approvals. If the power source is a 240 V AC supply, use the tandem (T blade) type attachment plug with ground conductor power cord that meets the respective European country’s safety regulations, such as VDE for Germany.
- Do not overload wall outlets or power cords. Ensure that the total of all units
plugged into the wall outlet does not exceed 10 amperes.
- Ensure that the total ampere rating of all units plugged into the extension cord is
not over the cord’s rating.
- If the power supply cord, which came with your monitor, is to be connected to
the PC instead of the wall outlet, this equipment is to be used with UL/TUV approved computers with receptacle rated 100~240V AC, 50/60Hz,
2.0A(minimum).
Environment
- Place the monitor on a flat and leveled surface.
- Place the monitor in a well-ventilated place.
- Keep the monitor away from:
Extremely hot, cold or humid places, places directly under sunlight, dusty surroundings, equipment that generate strong magnetic fields.
Page 14
14
1DU00L5B-A.0
Loading...