Speco Internet Protocol SIP H.264 Series, SIPMPDVFH, SIPMPBVFH Instruction Manual
i
Speco Internet Protocol (SIP)H.264
Series Camera Instruction Manual
(Version 1.0.0)
SIP H.264 Megapixel Cameras
SIPMPBVFH & SIPMPDVFH
Speco Technologies
200 New Hwy, Amityville, NY 11701
800-645-5516 www.specotech.com
All manuals and user guides at all-guides.com
all-guides.com
ii
Table of Contents
1. FEATURES ....................................................................................................... 1-1
1.1 Package ..................................................................................................................... 1-1
1.2 Dimension and Connector Description
..................................................................... 1-2
1.2.1 Dimensions .................................................................................................................... 1-2
1.2.2 Connector Description ................................................................................................... 1-4
2. INSTALLATION .............................................................................................. 2-5
2.1 Recommended PC Specification ............................................................................ 2-5
2.2 Preparation before setup ........................................................................................ 2-6
2.2.1 Setup your PC network .................................................................................................. 2-6
2.3 Configuring the IP device ................................................................................. 2-11
2.3.1 Video Display .............................................................................................................. 2-13
2.3.2 Date & Time ................................................................................................................ 2-16
2.3.3 Network Section .......................................................................................................... 2-18
Host .......................................................................................................................................... 2-19
IP Address Filtering ................................................................................................................. 2-20
Port Mapping ........................................................................................................................... 2-22
ToS ........................................................................................................................................... 2-24
UPnPTM .................................................................................................................................... 2-25
SNMP Setting .......................................................................................................................... 2-26
RTP .......................................................................................................................................... 2-26
Speed & Duplex ....................................................................................................................... 2-28
2.3.4 IP Settings .................................................................................................................... 2-29
Connection Type ...................................................................................................................... 2-29
DNS ......................................................................................................................................... 2-31
DDNS ...................................................................................................................................... 2-32
2.3.5 Video & Audio ............................................................................................................ 2-33
Video ........................................................................................................................................ 2-33
2.3.6 System ......................................................................................................................... 2-51
User Account ........................................................................................................................... 2-51
System Info .............................................................................................................................. 2-52
Factory Default ........................................................................................................................ 2-53
Firmware Upload ..................................................................................................................... 2-54
All manuals and user guides at all-guides.com
iii
Profile Upload .......................................................................................................................... 2-55
Save & Reboot ......................................................................................................................... 2-56
Logout ...................................................................................................................................... 2-56
APPENDIX .............................................................................................................................. 2-57
3.1 Specification ........................................................................................................... 2-57
3.1.1 SIP H.264Camera Series ............................................................................................. 2-57
All manuals and user guides at all-guides.com
All manuals and user guides at all-guides.com
1-1
1. FEATURES
1.1 Package
Package of Products is composed of the main body of the camera, Software CD (NVR
Program, Product Manual, NVR Manual), Quick Install Guide, Cross LAN Cable,
Accessory Pack, Power Lead Cable.
Please check before starting installation.
1
Software CD
SIPMPBVFH Camera
Cross LAN Cable
Quick Install Guide
Power Lead Cable
Accessory Pack
SIPMPDVFH Camera
All manuals and user guides at all-guides.com
1-2
1.2 Dimension and Connector Description
1.2.1 Dimensions
1. SIPMPBVFH
①
②
③
④
⑥
⑤
All manuals and user guides at all-guides.com
all-guides.com
1-3
2. SIPMPDVFH
①
②
③
④
⑤
All manuals and user guides at all-guides.com
1-4
1.2.2 Connector Description
① 12 Volts DC Power Input
② Audio Output
③ Audio Input : The SIP Camera supports one audio input and output
④ Ethernet Port : Standard RJ45 connector. Supporting POE.
⑤ Reset Button (** Please open the case for the Bullet / Dome type camera )
Step 1 : Switch off SIP Camera by disconnecting the power cable.
Step 2 : Using a suitable pointed object, press and continue to hold the Reset
Button. While continuing to hold the reset button, reconnect the power cable.
Step 3 : Keep holding the reset button for 6 seconds, release the reset button.
The unit will start up with factory default settings.
⑥ LED Light level controller
All manuals and user guides at all-guides.com
2-5
2. INSTALLATION
2.1 Recommended PC Specification
CPU
Core2Duo 2.13GHz and above
Memory
2 GB or above
Operating System
Windows XP with SP2 or above. Windows Vista / Windows 2003 /
Windows 7
Internet Explorer 6.0 SP2 and above.
Video Resolution
SVGA or XGA with 1024x768 resolution
CPU
Core2Duo 2.13GHz and above
2
All manuals and user guides at all-guides.com
2-6
2.2 Preparation before setup
To configure your IP device, you have to use Internet Explorer to log in.
Before that, your PC’s network settings and the IP device’s IP address must
be set up. Make sure all the connections are connected correctly, and then
follow the procedures below.
1. Setup your PC network
You have to match your PC’s TCP/IP setting with the IP device’s
default settings before you can use IE browser to login it. This section
tells you how to setup your PC’s TCP/IP settings.
2. Setup IP device’s IP address
This IP device’s IP address can be setup manually or automatically by
network service (DHCP). If it acquires the IP address by using the
DHCP service, please use the IP utility software bundled in the product
CD to search all the IP devices’ IP address.
2.2.1 Setup your PC network
To set up the network of IP device via a PC, you have to change the TCP/IP
settings of the PC.
The following are the default network settings of IP device.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To access the IP device, the IP address of the PC should match the address
below.
IP Address: 192.168.0.xxx
Subnet Mask: 255.255.255.0
NOTE: xxx should be a number from 1 to 254, but 100 is excepted.
All manuals and user guides at all-guides.com
2-7
The procedure below is the setup procedure of a PC using Windows XP as
its OS. When running an OS other than Windows XP, please refer to the
manual included with the OS.
STEP 1
Start up your PC.
STEP 2
Click the [Start] and select the "Control Panel"
All manuals and user guides at all-guides.com
all-guides.com
2-8
STEP 3
Double-click the "Network and Internet connections" icon.
STEP 4
Double-click the "Network connections" icon
All manuals and user guides at all-guides.com
2-9
STEP 5
Click “Local Area Connections”, and then click “Change settings of
this connection” in the network Task menu.
STEP 6
Click “Internet Protocol (TCP/IP)”, and then click the [Properties]
button.
All manuals and user guides at all-guides.com
2-10
STEP 7
Click the “Use the following IP address” radio button and enter the IP
address and the subnet mask.
STEP 8
Click the [OK] button and the window dialog box closes.
Please set the settings as below.
IP address: 192.168. 0.xxx
Subnet mask: 255.255.255. 0
(NOTE: xxx should be a number
from 1 to 254, but 100 is
excepted.)
All manuals and user guides at all-guides.com
2-11
2.3 Configuring the IP device
This section describes how to configure the IP device. The product
administrator has unlimited access to all setup windows and normal users
can only watch the live image. The IP device is configured under a
standard browser (Microsoft Internet Explorer 6.0 or above).
Follow the procedures below to configure the IP device.
STEP 1: Open a browser
STEP 2: Enter the IP address of the IP device.
The default IP address is “192.168.0.100”
The “Login Page” is now displayed as below.
STEP 3: Enter the Account name (factory default: Admin) and the
Password (factory default: 123456).
STEP 4: Select the language of the IP device user interface. You can
select from English, Traditional Chinese, Simplified Chinese, Japanese,
Spanish, Italian, German, Portuguese, Czech and French. This user
interface setting will disappear once you log out, if you want to change
the default user interface language, please change the setting of [Host
setting] after login success.
STEP 5: Click the
button to login or click the button
to re-enter again.
Once successfully login, the “Video Display page” will be displayed
as below.
NOTE: Internet Explorer of 6.0 or above is highly recommended. If you
don’t have the it, please download it from
http://www.microsoft.com/windows/ie/downloads/default.mspx
All manuals and user guides at all-guides.com
2-12
All manuals and user guides at all-guides.com
all-guides.com
2-13
2.3.1 Video Display
This section tells you how to view live images via Internet Explorer.
Click the
[Live] tab to show [Live page]. Refer to the table below for how to
configure each setting.
Function List
Function Description
Full Screen
Click the icon
to stretch the preview to full screen.
You can click “Esc” button on the keyboard to return to
previous display.
Snapshot
Click the icon “
” to take a snapshot. The snapshot
picture will be saved to the default folder
“C:\Users\”account name”\Picture”, in the format of
YYYYMMDD_HH_mm_ss.jpg.
All manuals and user guides at all-guides.com
2-14
Audio out
Click the icon
to enable the audio out from PC to IP
camera or video server. When it is enabled, your voice will
be transferred to the audio out of the IP camera or video
server.
NOTE: you will need to have a microphone connected to
your PC to do that.
Media
If dual stream mode is enabled, click to select which
stream to display (Media 1 or 2). The default is single stream
only. To change to dual stream mode, please refer to “Media
1” section under “Setup” tab
Encoder Type
Click to select the compression codec used in video
encoding. The Encoder type option includes MPEG-4,
MJPEG and H.264. Once selected, the video server/IP
camera will start to send video in new stream type.
Display size Click or of to adjust display screen
size
Audio in
Click the icon
to mute or the icon to
receive audio in from the video server/IP camera. Drag the
volume bar
to adjust the volume.
Digital Zoom
Digital zoom enables you to zoom into the image. You can
click to zoom in and click to zoom
out. You can click the “no zoom” button
to cancel all zoom-in and go back to original status (no zoom
status).
When you digitally zoom in the video, you can click
to pan/tilt the video up, down, left and right.
NOTE: This pan/tilt function does not work if the video is
All manuals and user guides at all-guides.com
2-15
not zoomed-in (no zoom status).
Network
status
Indicates the network state. If the light on the right is
green, it means the network is ok. If the light is gray, it
means the network is broken.
The light on the left is not used
DO Setting
Click to set DO output level to High.
Click
to set DO output level to Low. If your device
has more than one DO available, each DO is controlled
separately.
If you want to setup this IP camera/video server, please click the [Setup] tab to
switch to “Setup Page”
All manuals and user guides at all-guides.com
2-16
2.3.2 Date & Time
This section tells you how to setup IP device’s date and time settings.
STEP 1: Click the [Date & Time] on the “Main Setup page”.
The “Date setting page” is displayed as below
STEP 2: Configure these settings with reference to the table below. If you
are still unsure what to set, contact your system administrator.
Date Setting
Parameters Description
SNTP/NTP
server
Click this to enable IP device’s SNTP/NTP function. This
enables
this IP device
to synchronize its time settings with a SNTP/NTP
server. You can use this function to make sure al
l your IP devices’
time is the same. Additionally, with our embedded
digital-time-
code in the streaming, you can tell the event sequence
accurately.
IP address: Enter the IP address of the SNTP/NTP server.
Sync time: Select the time interval f
or this IP device to
synchronize its time.
Set
Click this to manually setup the date & time.
All manuals and user guides at all-guides.com
Loading...