Speco POEINJ User Manual
J
PPOOEEIINNJ
Thank you for your choice of Speco Technologies’ POEINJ IP camera accessory. This unit is designed and manufactured to provide an
economical solution for powering IP cameras using Power over Ethernet. The sturdy construction of these units ensures a long & productive
life.
– 802.3af/at Power Over Ethernet Injector
DESCRIPTION
The POEINJ is an Ethernet power device that will take a data signal from a network switch and power from the included AC power cable and
transmit it over Cat5/5e/6 cable in a manner capable of powering and receiving images from a PoE capable camera.
INSTALLATION INSTRUCTIONS:
1) Turn off power to the units and sources. Installing the
POEINJ while power is live may damage the units.
2) Use an RJ45 network cable to connect the remote camera to the
POEINJ through the P+D (Power + Data) /OUT connection.
3) Use an RJ45 network cable to connect your network switch with the
POEINJ Data/In port.
4) Connect the power adapter.
5) Confirm all cables are connected securely and properly and power
SPECIFICATIONS:
Speco Technologies is constantly developing and improving products.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
on all units.
· Ports: 1 x RJ-45 Output, 1 x RJ-45 Input
· Ethernet Speed: Up to 10/100/1000MBPS
· PoE Standards: IEEE 802.3at/af
· Power: 25.5W Max
· Operating temperature: 32°F to 131°F
· Storage temperature: -40°F to 185°F
· Operating humidity: 0% to 95%RH
· Dimensions: 4.7” (W) x 2.4” (H) x 1.5” (L)
· Weight: 0.5 Lbs.
· Warranty: 2 Years (please visit Specotech.com for full warranty terms and conditions)
Speco Technologies . 200 New Highway . Amityville . NY . 11701 . www.specotech.com
Rev. 04/23/15.
Loading...