Speco OPTZGN User Manual
Installation
GOOSENECK MOUNT GOOSENECK MOUNT
Installation
CONTENTS CONTENTS
1. GOOSENECK MOUNT BRACKET 1 EA
2. SET ANCHOR BOLT (W5/16) 4 EA
1. If you want to install the speed dome on the concrete wall, you need to make
12.5mm diameter 4 holes by drill like FIG. 1 ( Depth 37mm)
2. Install SET ANCHOR BOLT on the holes.
3. Drive a cap on the pipe. (FIG. 2)
4. After winding the THREAD SEAL TAPE, screw the bracket on the housing. (FIG. 3)
5. Fix SET ANCHOR BOLT SET of the bracket by nut.
155
4-Ø12.5 4-Ø12.5
75 75
FIG. 1 FIG. 1
3. CAP 1 EA
5. MANUAL 1 EA
1. GOOSENECK MOUNT BRACKET 1 EA
2. SET ANCHOR BOLT (W5/16) 4 EA
1. If you want to install the speed dome on the concrete wall, you need to make
12.5mm diameter 4 holes by drill like FIG. 1 ( Depth 37mm)
2. Install SET ANCHOR BOLT on the holes.
3. Drive a cap on the pipe. (FIG. 2)
4. After winding the THREAD SEAL TAPE, screw the bracket on the housing. (FIG. 3)
5. Fix SET ANCHOR BOLT SET of the bracket by nut.
Thread Seal Tape Thread Seal Tape
Cap Cap
FIG. 2 FIG. 2
FIG. 3 FIG. 3
3. CAP 1 EA
5. MANUAL 1 EA
155
[ The Cable Into the Ceiling ] [ The Cable Into the Ceiling ][ The Cable Out of the Ceiling ] [ The Cable Out of the Ceiling ]
FIG. 4 FIG. 4
Loading...