Speco M17VLED User Manual

M17VLED (17” CCTV LED Monitor)

M19VLED (19” CCTV LED Monitor)

USER MANUAL

Speco Technologies 200 New Highway Amityville, NY 11701 800-645-5516

www.specotech.com

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.

CAUTION:

CAUTION

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the product.

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and usage instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a

swimming pool.

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious

damage to the unit. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven

surfaces may cause the appliance and cart combination to overturn.

9. VENTILATION

Slots and openings at the rear cabinet and bottom are provided for ventilation, these are to ensure reliable operation of the unit,

and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by

Important Information

placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat

source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided

or the manufacturer’s instructions have been adhered to.

10. POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of

power supply to your home, consult your appliance dealer or local power company.

11. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit.

12. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended a nd unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line

surges.

13. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits,

or where it can fall onto or against such power lines or circuits. When installing an outside antenna system, extreme care should

be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

14. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

15. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could

result in fire or electric shock. Never spill or spray any type of liquid into the unit.

16. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including

amplifiers) that produce heat.

17. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet.

Failure to do so may cause a product damage. Read the owner's manual of the other equipment carefully and follow the

instructions when making any connections.

18. LCD

Do not press on or jolt the LCD panel. Doing so may cause the LCD panel glass to break and injury may occur. Should the LCD

panel be broken and liquid leaks out, do not inhale or swallow it. Doing so may cause poisoning. If you have got it into your

mouth, wash it out and consult your doctor. If your hands or clothes have touched it, wipe them with alcohol and a cleaning cloth

and then wash them well.

Safety, Regulatory and Legal Information

US Regulatory compliance statements

Your LCD AV has been tested and found to comply with the limits for a Class B digital devices,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. Your LCD AV generates, uses, and can radiate

radio frequency energy, and if not installed and used in accordance with the instruction, may cause

harmful interference to radio communication. However, there is no guarantee that interference with not

occur in a particular installation. If your LCD AV does cause harmful interference to radio or television

reception, which can be determined by turning your LCD AV off and on, the user is encouraged to try

to correct the interference by one or more the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and the receiver

 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.



Consult the dealer or an experienced radio/AV technician for help.

Warning: Use only shielded signal cables to connect I/O devices to your LCD AV. You are cautioned

that changes or modifications not expressly approved by the party responsible for

compliance could viold your authority to operate the LCD AV.

Safety Precautions

FCC STATEMENT

This LCD AV complies with part 15 FCC Rules. Operation is subject to the following two

conditions (1) This device may not cause harmful interference. (2) This LCD AV must accept

and interference received, including interference that may cause undesired operation.

Canada Regulatory compliance statements

This LCD AV does not exceed the Class B limits for radio noise emissions from digital apparatus as set

out in the radio interference regulations of Industry Canada.

Federal Communications Commission (FCC) Statement

This Equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Safety Precautions

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.



You are cautioned that changes or modifications not expressly approved by the party

responsible for compliance could void your authority to operate the equipment.

Warning…………………………………………………………………………………………………2

Important Safeguards…………………………………………………………………………………………3

Safety Precautions……………………………………………………………………………………………4

Table of Contents……………………………………………………………………………………………6

Components…………………………………………………………………………………………………6

Feature…………………………………………………………………………………………………………7

Exploring Your New Monitor…………………………………………………………………………………8

Table of Contents

This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received including interference that may

cause undesired operation

Function Keys Instruction for AV……………………………………………………………………………9

I/O Connection………………………………………………………………………………………………10

OSD (On Screen Display)…………………………………………………………………………………10

AV/S-Video OSD-Image……………………………………………………………………………………11

AV/S-Video OSD-Audio……………………………………………………………………………………12

AV/S-Video OSD-Setup……………………………………………………………………………………13

VGA OSD-Image……………………………………………………………………………………………14

VGA OSD-Audio……………………………………………………………………………………………15

VGA OSD-Setup……………………………………………………………………………………………16

Applicable Timing……………………………………………………………………………………………17

Specification…….……………………………………………………………………………………………18

Wall Mountable………………………………………………………………………………………………19

Dimension…………………………………………………………………………………………………….20

LCD Color Monitor x1

Accessories

(a) Power cord x1

(b) User Manual x1

(d) Mounting base x1

(e) PC audio cord x1

(f) Adaptor x1

+ 18 hidden pages