Page 1
LPRB922
License Plate Capture Camera
Installation Guide
Speco Technologies 200 New Highway, Amityville, NY 11701 1-800-645-5516 www.specotech.com
Speco Technologies is constantly developing product improvements
We reserve the right to modify product design and specifications without notice and without incurring any obligation
Rev. 3/15/10
Page 2
1. Notice of Use
Follow all instructions. All requirements should be followed before using this camera.
SPECO TECHNOLOGIES is not responsible for any technical or typographical errors
and reserves the right to change this manual without notice.
Keep this document for future reference.
Please make sure the power source is 12V DC/24 V AC. Only connect to the camera to
these required power systems.
The camera must be installed on a solid mounting surface.
Store the camera and other accessories in a dry place.
SPECO TECHNOLOGIES is not responsible for any damage caused by inappropriate use.
Speco Technologies 200 New Highway, Amityville, NY 11701 1-800-645-5516 www.specotech.com
Speco Technologies is constantly developing product improvements
We reserve the right to modify product design and specifications without notice and without incurring any obligation
Rev. 3/15/10
Page 3
2. Product Overview
The LPRB922 is a high-performance plate-capture camera, equipped with a 1/3” SONY™ CCD.
Outfitted with powerful 850 nm IR, the LPRB922 works perfectly even in total darkness to
deliver clear plate images. Its varifocal IR-corrected lens keeps it in focus day and night,
optimizing performance even in very low light conditions. In short, the LPRB922 provides the
kind of reliability and round-the-clock surveillance-and-capture capabilities crucial to
maximizing the efficiency of LPR applications.
High Contrast Image
The LPRB922 features high-contrast imaging performance that delivers sharp, clear licenseplate captures, even of vehicles moving at 55 MPH, in bad weather, and in low-light
conditions.
Powerful IR
Its powerful IR functionality and IR-corrected lens deliver perfect image captures and
outstanding images all day long. It is also equipped with a high-power LED to help minimize
energy usage.
Wide Range Capture
Its built-in 9-22mm lens captures a wide 10-27 ft. field.
Rain Guard/ Extendable Sunshield
The camera’s rain guard and extendable sunshield minimize the effects of rain and sunlight
on image quality.
Easy Installation
The cable-management bracket enables easy installation in any location, including walls,
surfaces, and ceilings.
Note: Because of the special nature of this camera, it will only show pictures
of license plates. All other items in the camera's field of view will be blacked out.
Speco Technologies 200 New Highway, Amityville, NY 11701 1-800-645-5516 www.specotech.com
Speco Technologies is constantly developing product improvements
We reserve the right to modify product design and specifications without notice and without incurring any obligation
Rev. 3/15/10
Page 4
Camera Dimensions:
Speco Technologies 200 New Highway, Amityville, NY 11701 1-800-645-5516 www.specotech.com
Speco Technologies is constantly developing product improvements
We reserve the right to modify product design and specifications without notice and without incurring any obligation
Rev. 3/15/10
Page 5
2.1 Camera Parts Definition
Rain guard/extendable sunshield: minimize the effects of rain and sunlight on image quality
Tele/Wide and Far/Near adjustment screws: lens adjustment
Mount adjustment: easy to mount at different angles
BNC connector: video output
Power connector: 12V DC / 24V AC
Extendable
sunshield
Tele/Wide adjustment screw
Far/Near adjustment screw
Mount adjustment
BNC connector
Power connector
Rain guard
Speco Technologies 200 New Highway, Amityville, NY 11701 1-800-645-5516 www.specotech.com
Speco Technologies is constantly developing product improvements
We reserve the right to modify product design and specifications without notice and without incurring any obligation
Rev. 3/15/10
Page 6
2.2 Specifications
Image system
Signal system
NTSC
Image Sensor
1/3" SONY CCD
Effective pixels
768 (H) x 494 (V)
Electric
Scanning system
2:1 Interlace V: 59.94Hz
H: 15.734KHz
Sync system
Internal
Horizontal resolution
600 TV lines
Built-in lens
f=9mm ~ 22mm, F1.4 DC iris varifocal IR-corrected lens
External adjustments (zoom and focus)
View angle
Horizontal: 32.1° (wide) ~ 13.1° (tele)
Vertical: 23.3° (wide) ~ 9.8° (tele)
Gamma correction
0.45
Minimum illumination
0 Lux (IR LEDs ON)
S/N ratio
More than 50dB (AGC off)
BLC
Auto (Center Weighting)
Video output
1Vpp composite output, 75 Ohm
IR LEDs 36 Super power LEDs
IR wavelength
850nm
IR distance
50 ft.
Capture range
10~27 ft.
Capture speed
55 MPH
LED life
More than 10,000 hours (122℉)
Power supply
Power requirement
Dual voltage: 12V DC / 24V AC
Power consumption
10W (max.)
Environment
Operating Temp.
-14℉
~122℉
Mechanism
Dimensions
3.26" H x 8.09" W
Weight
1.35 lbs.
Construction
Sunshield; Cable management bracket
Compact die-cast aluminum; Tempered Glass
Protection class
IP66 weatherproof rating; Vandal-resistant
Speco Technologies 200 New Highway, Amityville, NY 11701 1-800-645-5516 www.specotech.com
Speco Technologies is constantly developing product improvements
We reserve the right to modify product design and specifications without notice and without incurring any obligation
Rev. 3/15/10
Page 7
3. Mounting Specifications & Installation Instructions
Please follow the mounting specifications to install the LPRB922 camera.
3.1 Package Contents
Item Description
LPRB922 camera camera assembly
rubber pad static electricity protection
3 insulation tubes static electricity protection
mounting templateguide pattern sticker
fo
3 self-tapping screws
r mounting camera
3 plastic anchor
for cement ceiling mounting
printed material
installation guide, notice card
3.2 Mounting Specifications
1. Use appropriate screws and select an appropriate location to install the camera.
2. Ensure the mounting surface can support the weight of the camera.
3. The width of the license plate should cover approximately 17-20% of the width of
the screen.
4. The camera height should be more than 36 inches.
5. The vertical angle should be less than 40 degrees.
Speco Technologies 200 New Highway, Amityville, NY 11701 1-800-645-5516 www.specotech.com
Speco Technologies is constantly developing product improvements
We reserve the right to modify product design and specifications without notice and without incurring any obligation
Rev. 3/15/10
Page 8
6. The horizontal angle should be less than 40 degrees. This camera is designed to
cover only one lane (less than 3 meters).
7. If using with a DVR, make sure the DVR has the de-interlace feature and the frame
rate is above 15 fps for optimal effect.
8. To ensure an optimal view, please adjust the lens under the conditions we suggest.
3.3 Camera Installation
1. Mark hole positions: use the mounting template to mark hole positions on the
desired location. If you want to mount the camera on a cement surface, insert the
plastic anchors into holes which you've drilled into the cement first.
2. Adjust the mounting angle: Loosen the left and right screws and rotate the
mount adjustment counterclockwise to adjust a desired angle for mounting.
Then, fasten the screws and rotate the mount adjustment clockwise to set desired angle.
Partial enlargement
Speco Technologies 200 New Highway, Amityville, NY 11701 1-800-645-5516 www.specotech.com
Speco Technologies is constantly developing product improvements
We reserve the right to modify product design and specifications without notice and without incurring any obligation
Rev. 3/15/10
Page 9
3. Install the camera: Lock the 3 self-trapping screws to fasten the camera.
For static electricity protection, please use the rubber pad to cover the metal
mount adjustment and put 3 insulation caps through the metal screws when locking the
3 self-trapping screws into the desired location.
3.
rotate the mount
adjustment
1. loosen the left
screw
self-trapping screw
2. loosen the right
screw
insulation tube
rubber pad
Speco Technologies 200 New Highway, Amityville, NY 11701 1-800-645-5516 www.specotech.com
Speco Technologies is constantly developing product improvements
We reserve the right to modify product design and specifications without notice and without incurring any obligation
Rev. 3/15/10
Page 10
4. Adjust the lens: loosen the Tele/Wide or Far/Near screw counterclockwise and then
adjust it according to your needs. After adjustment, be sure to lock it tightly to prevent
water leaking into the body of the camera.
5. Adjust the sunshield: loosen the screw counterclockwise, move the sunshield
forward or backward and then turn the screw clockwise to fix the position of the
sunshield. Be sure to adjust the sunshield in coordination with the lens to avoid
reflection problems.
move forward/backward
Warning! To avoid water
leaking, do not loosen
these 2 screws.
Warning! To avoid damage to
the lens, do not adjust the Tele/Wide
or Far/Near screw beyond the
marked lines.
Speco Technologies 200 New Highway, Amityville, NY 11701 1-800-645-5516 www.specotech.com
Speco Technologies is constantly developing product improvements
We reserve the right to modify product design and specifications without notice and without incurring any obligation
Rev. 3/15/10
Loading...