Intensifier Series
Camera
HT - INTB8/9/10
Please read this manual throughly before operation and keep
it handy for further reference.
2
CONTENTS
Camera Set Up
P33
How to Install
P34
MOTION DET.
P23
Package Contents
P3
Precautions
P4
O S D Menu
P5
Operating Your Camera
P6
MENU SET UP
P6
LENS SET UP
P7
SHUTTER SPEED
P9
MANUAL
P10
E L C
P11
B L C
P12
A
G C
P13
WHITE BAL.
P14
S L C
P16
INTENSIFIER
P17
NEXT
P18
CAMERA TITLE
P19
C O L O R
P21
S Y N C
P22
PRIVACY
P25
REVERSE
P27
DETAIL
P28
Troubleshooting
P30
Specification
P32
Warranty
P35
3
Please make up sure that the following items are
included in the package:
1 HT - INTB CAMERA
PACKAGE CONTENTS
4 MOUNTING SCREW
1 MOUNTING BASE
1 SUNSHIELD
1 USER'S MANUAL
1 L - WRENCH
1 VIDEO TEST CABLE
1 POWER PIGTAIL
1 HT - INTB8 CAMERA
4
TO PREVENT A FIRE OR ELECTRONICAL HAZARD PLEASE
USE PROPER POWER CABLE
PLEASE USE A UL APPROVED REGULATED 24 VOLT AC
OR 12 VOLT DC POWER SUPPLY
PLEASE USE APPROPRIATE LOW VOLTAGE POWER
CABLE TO PREVENT FIRE OR ELECTRICAL SHOCK.
INSTALLATION SHOULD BE PERFORMED BY QUALIFIED
PERSONNEL
PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
SUPPORT THE WEIGHT OF THE CAMERA
PLEASE HANDLE THIS CAMERA CAREFULLY:
- DON'T USE A STRONG OR ABRASIVE DETERGENT WHEN
CLEANING THE CAMERA.
- USE A SOFT TISSUE OR LENS CLOTH TO CLEAN THE
FRONT GLASS.
- DON'T EXPOSE THE CAMERA TO DIRECT SUN
PRECAUTIONS
5
◈ Function
SET UP MENU
LENS OPTION
● DC ● MANUAL
SHUTTER
● OFF ● F/L ● MANUAL
WHITE BALANCE
● ATW ● AWC ● MANUAL
SLC - ( Speco Light Compensation )
● OFF ● LOW ● MIDDLE ● HIGH
A
UTO GAIN
● OFF ● LOW ● MIDDLE ● HIGH
REDUCE NOISE
● OFF ● LOW ● MIDDLE ● HIGH
INTENSIFIER
● AUTO ● OFF
NEXT PAGE
● CAMERA TITLE ● DAY/ NIGHT ● SYNC
● MOTION ● PRIVACY ● REVERSE
● DETAIL ● DEFAULT ● PAGE1
EXIT
OSD MENU
6
MENU SET UP
SPECO TECH
LENS TYPE DC IRIS
SHUTTER SPEED MANUAL
WHITE BAL ATW
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE -----
INTENSIFIER -----
NEXT PAGE
EXIT
Menu is adjusted by the OSD button on the camera
1. Press the SET button to access the SETUP mode.
● SETUP menu should be displayed on the monitor screen.
2. Select the desired feature using the UP or DOWN buttons
● Move the arrow indicator UP or Down to indicate onto desired feature
by pressing the UP or Down button.
SPECO TECH
LENS TYPE MANUAL
SHUTTER SPEED MANUAL
WHITE BAL ATW
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE -----
INTENSIFIER -----
NEXT PAGE
EXIT
Select
desired
Changr the adjustment
By Left or Right Button
MANUAL : Manual Lens
7
CAUTION
A
ccess to submenu by moving arrow to desired feature
A
ccess is not available to submenu on the mode of " -----".
3. MENU SETUP change by using button
● Available value or status should be displayed by pressing the Left or Right button.
● Please press the button until desired features appears.
4. When adjustment is completed, move the arrow indicator to " EXIT " and press the
"SET" button.
SPECO TECH
LENS TYPE MANUAL
SHUTTER SPEED ELC
WHITE BAL ATW
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE -----
INTENSIFIER -----
NEXT PAGE
EXIT
LENS SETUP
Select the lens by pressing the RIGHT button
1. Move the arrow indicator to " LENS " by UP or Down button on the
SETUP menu.
DC / VIDEO : DC Auto IRIS Lens
MANUAL :
Manual Lens
8
2. Select the desired lens type by LEFT or RIGHT button.
SPECO TECH
LENS TYPE DC IRIS
SHUTTER SPEED ELC
WHITE BAL ATW
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE -----
INTENSIFIER -----
NEXT PAGE
EXIT
CAUTION
You can control the brightness when DC is selected, Brightness control range will be 1~70.
LENS
BRIGHTNESS 1--------1---------1 35
Press Set to Return
CAUTION
Color mode is not available when AGC OFF
LENS SETUP
OFF : Deactivation
FLK (1/100):Flicker mode
9
SHUTTER SPEED CONTROL
SPECO TECH
LENS TYPE DC LENS
SHUTTER SPEED
WHITE BAL ATW
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE -----
INTENSIFIER -----
NEXT PAGE
EXIT
SPECO TECH
LENS TYPE MANUAL
SHUTTER SPEED MANUAL
WHITE BAL ATW
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE -----
INTENSIFIER -----
NEXT PAGE
EXIT
You can control brightness of screen by the shutter speed.
① Press the SET button to display the setup menu and move the arrow
indicator to " SHUTTER " by the UP or DOWN button.
② Set " SHUTTER " to the desired mode by the LEFT or RIGHT button
When setting the shutter speed manually,
You can select from " 1/60 " to " 1/200,000" sec
10
MANUAL
SPECO TECH
LENS TYPE MANUAL
SHUTTER SPEED MANUAL
WHITE BAL ATW
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE -----
INTENSIFIER -----
NEXT PAGE
EXIT
SHUTTER TYPE
MANUAL 1/60
Press SET to Return
You can control the BRIGHTNESS.
11
SPECO TECH
LENS TYPE MANUAL
SHUTTER SPEED ELC
WHITE BAL ATW
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE -----
INTENSIFIER -----
NEXT PAGE
EXIT
Brightness
BRIGHTNESS I I I 35
Press SET to Return
ELC
③ When completed, press " SET "
CAUTION
A
void pointing the camera directly at a fluorescent lamp.
When the SUTTER menu is set to FLK mode, the INTENSIFIER will not work.
CAUTION
BLC ON BLC OFF
12
BLC( Back Light )
3) SLC ( Speco Light Compensation )
A built - in SR chip provides intelligent light level control to overcome
severe Backlight conditions.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " SLC " by the UP or DOWN button.
② SET " SLC " to desired mode by the LEFT or RIGHT button.
OFF LOW
MIDDLE
HIGH
SPECO TECH
LENS TYPE DC
SHUTTER SPEED
WHITE BAL ATW
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE -----
INTENSIFIER -----
NEXT PAGE
EXIT
13
AGC(Auto Gain
4) AGC ( Auto Gain Control )
AGC allows a brighter picture in low light conditions. Higher GAIN level will
yield a brighter screen, but you might notice an increase in noise.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " SLC " by the UP or DOWN button.
② SET " SLC " to desired mode by the LEFT or RIGHT button.
OFF LOW
MIDDLE
HIGH
SPECO TECH
LENS TYPE DC
SHUTTER SPEED
WHITE BAL ATW
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE -----
INTENSIFIER -----
NEXT PAGE
EXIT
14
WHITE BAL.
5) WHITE BALANCE
① Press the SET button to display the SETUP menu and move the arrow
indicator to " WHITE BALANCE " by the UP or DOWN button.
② SET " WHITE BAL " to desired mode by the LEFT or RIGHT button.
SPECO TECH
LENS TYPE DC
SHUTTER SPEED
WHITE BAL AWC
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE -----
INTENSIFIER -----
NEXT PAGE
EXIT
A
TW(Auto Tracking White Balance)
: When color temperature is 2400 ~ 12000K, select this mode.
(ex. A fluorescent lamp, or outdoors)
A
WC(Auto White Balance Control)
: The white balance is automatically adjusted in a specific environment.
In order to obtain the best result, press the set button while the camera
focuses on the white paper. If the environment including the light source
is changed, you have to adjust the white balance again.
15
MANUAL : To fine adjust, select the manual mode.
You can increase the red or blue factor while monitoring the difference
on the screen. Set the "MANUAL" mode and press the SET button.
Increase or decrease the value for RED(R-Gain) and BLUE(B-Gain),
watching the color of the picture and press the SET button when you
obtain the best color.
Proper White Balance may not be obtained under the following conditions.
in these case, select the AWC mode.
- When the scene contains mostly high color temperature object, such as
bule sky or sunset.
- When the scene is dim.
- If your camera faces a fluorescent lamp directly or is installed in an area
with constantly changing illumination.
CAUTION
WHITE BAL.
16
D N R
6) REDUCE NOISE ( Digital Noise Redution )
DNR reduce the video noise on the screen.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " REDUCE NOISE " by the UP or DOWN button.
② SET " REDUCE NOISE " to desired mode by the LEFT or RIGHT button.
SPECO TECH
LENS TYPE DC
SHUTTER TYPE
WHITE BAL AWC
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE
INTENSIFIER -----
NEXT PAGE
EXIT
OFF : Deactivation
LOW : Low reduction of the noise
MIDDLE : Middle reduction of the noise
HIGH : High reduction of the noise
If you change the "GAIN" menu from AGC-L to AGC-H, sensitivity is increased
as well as noise on the screen.
When the selected "GAIN" menu is OFF, REDUCE NOISE will not work.
CAUTION
17
INTENSIFIER
7) INTENSIFIER
Allows you to get clear images with this function under night or low light conditions.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " INTENSIFIER " by the UP or DOWN button.
② SET " INTENSIFIER " to desired mode by the LEFT or RIGHT button.
SPECO TECH
LENS TYPE DC
SHUTTER TYPE
WHITE BAL AWC
SLC HIGH
AUTO GAIN OFF
REDUCE NOISE
INTENSIFIER
NEXT PAGE
EXIT
OFF : Deactivation
A
UTO : When your camera is under night or low light conditions,
select this mode. This mode allows the camera to switch
into B/W in low light conditions.
Increasing the amount of intensification results in brighter pictures under
low light conditions, and may increase image lag.
CAUTION
If you press"AUTO" button in the intensifier mode, you can control
the amount of intesification from 2X ~ X128.
Increasing the amount of intensification may cause image noise which is to
be expected as a normal condition.
18
NEXT PAGE
8) NEXT PAGE
① Press the SET button to display the SETUP menu and move the arrow
indicator to " NEXT PAGE " by the UP or DOWN button.
② SET " NEXT PAGE " to desired mode by the LEFT or RIGHT button.
SPECO TECH
LENS TYPE DC
WHITE BAL AWC
SLC HIGH
AUTO GAIN OFF
EXIT
NEXT PAGE
SHUTTER TYPE
REDUCE NOISE
INTENSIFIER
1) CAMERA TILTE
① Press the SET button to display the SETUP menu and move the arrow
indicator to " CAMERA TITLE " by the UP or DOWN button.
② SET " ON " to desired mode by the LEFT or RIGHT button.
If the CAMERA TITLE feature is set to " OFF", the name will not be
displayed on the monitor.
CAUTION
19
CAMERA TITLE
NEXT PAGE
SYNC INT
MOTION OFF
PRIVACY OFF
DEFAULT
PAGE 1
DAY / NIGHT
REVERSE OFF
CAMERA TITLE ON
DETAIL ON
③ Press SET button to access the SETUP mode.
④ You can enter up to 15 characters.
Ⓐ Move the cursor to character-enter location by using LEFT
or RIGHT button.
Ⓑ Select the desired character by using UP or DOWN button.
Ⓒ Press the SET button to confirm the blinking charactor. The first
character is saved and the cursor in the bottom of the screen
moves to the next position.
20
CAMERA TITLE
CAMERA TITLE
a b c d e f g h I j k l m
n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9
Press SET to Return
N O P Q R S T U V W X Y Z
CLR POS END
B C D E F G H I J K L M
A
If you make a mistake while entering a name, move the cursor to " CLR", press "SET"
button.
A
fter erasing the character from right to left, correct the character again.
CAUTION
ⓓ Repeat above steps until you creat the full name you want.
ⓔ Select the position at which the CAMERA TITLE will be located
on the screen.
- Move the cursor to "POS" and press SET button.
- Select the position by using the 4-directional buttons, then press
the SET button to confirm the position.
ⓕ When completed, move the cursor to "END" and press SET button.
21
C O L O R
2) COLOR
① Press the SET button to display the SETUP menu and move the arrow
indicator to " COLOR " by the UP or DOWN button.
② SET " COLOR " to desired mode by the LEFT or RIGHT button.
NEXT PAGE
SYNC INT
MOTION OFF
PRIVACY OFF
DEFAULT
PAGE 1
DAY / NIGHT
REVERSE OFF
CAMERA TITLE ON
DETAIL ON
COLOR : The camera will always display a color picture
A
UTO : The camera will switch Into B/W in the low light
conditions.
OSD key may not work for 3 seconds when COLOR /BW mode
is changed
CAUTION
22
S Y N C
3) SYNC
① Press the SET button to display the SETUP menu and move the arrow
indicator to " SYNC " by the UP or DOWN button.
② SET to desired mode by the LEFT or RIGHT button.
NEXT PAGE
SYNC INT
MOTION OFF
PRIVACY OFF
DEFAULT
PAGE 1
DAY / NIGHT
REVERSE OFF
CAMERA TITLE ON
DETAIL ON
INT : Internal synchronization
L/L : If you choose "L/L", you can adjust the desired phase.
- Press the SET button.
- You can adjust the desired phase from 0 to 270.
When it used in AC power, L/L mode can be used.
In 12V DC, the SYNC menu defaults to "INTERNAL".
CAUTION
23
M O T I O N
Press SET to Return
MOTION DETECTION
4) Whenever your camera detects motion, The words "motion detected"
will appear on the screen.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " MOTION " by the UP or DOWN button.
② SET " MOTION" to desired mode by the LEFT or RIGHT button.
PAGE 1
NEXT PAGE
SYNC INT
MOTION OFF
PRIVACY OFF
DEFAULT
DAY / NIGHT
REVERSE OFF
CAMERA TITLE ON
DETAIL ON
AREA SEL AREA1
AREA STATE ON
TOP l l l
DOWN l l l
LEFT l l l
RIGHT l l l
20
40
25
10
Max. Min.
24
MOTION DETECTION
OFF : Deactivation
ON : Activated
- Press the SET button.
- Move the arrow indicator to " AREA SET " using UP and DOWN
button. And then press the SET button.
- Set the areas you want to observe.
MOTION
AREA SEL AREA1
AREA STATE ON
TOP l l l
DOWN l l l
LEFT l l l
RIGHT l l l
Press SET to Return
18
13
6
5
10
25
20
40
25
PRIVACY
5) PRIVACY: To make an area that you want to be private.
① Press the SET button to display the SETUP menu and move the arrow
indicator to " PRIVACY " by the UP or DOWN button.
② SET " PRIVACY " to desired mode by the LEFT or RIGHT button.
PAGE 1
NEXT PAGE
SYNC INT
MOTION ON
PRIVACY OFF
DEFAULT
DAY / NIGHT
REVERSE OFF
CAMERA TITLE ON
DETAIL ON
PRIVACY
AREA SEL AREA1
AREA STATE ON
TOP l l l
DOWN l l l
LEFT l l l
RIGHT l l l
Press SET to Return
AREA TONE l l l
80
10
25
20
40
26
PRIVACY
PAGE 1
NEXT PAGE
SYNC INT
MOTION ON
PRIVACY ON
DEFAULT
DAY / NIGHT
REVERSE OFF
CAMERA TITLE ON
DETAIL ON
OFF : Deactivation
ON : Activated
- Press the SET button.
- Move the arrow to the area you want to mask.
- Set "ON" using LEFT or RIGHT button.
- Press the SET button and then set the area's
bounds as for MOTION detection.
REVERSE ON REVERSE OFF
27
REVERSE
6) REVERSE:
① Press the SET button to display the SETUP menu and move the arrow
indicator to " REVERSE " by the UP or DOWN button.
② SET " REVERSE " to desired mode by the LEFT or RIGHT button.
PAGE 1
NEXT PAGE
SYNC INT
MOTION ON
PRIVACY OFF
DEFAULT
DAY / NIGHT
REVERSE ON
CAMERA TITLE ON
DETAIL ON
OFF : Deactivation
ON : Reverse the Image RIGHT or LEFT such as mirror.
28
DETAIL
7) DETAIL:
① Press the SET button to display the SETUP menu and move the arrow
indicator to " DETAIL " by the UP or DOWN button.
② SET " DETAIL " to desired mode by the LEFT or RIGHT button.
PAGE 1
NEXT PAGE
SYNC INT
MOTION ON
PRIVACY OFF
DEFAULT
DAY / NIGHT
REVERSE ON
CAMERA TITLE ON
DETAIL ON
DETAIL
LEVEL I I I 8
Press SET to Return
29
DETAIL
OFF : Deactivation
ON : DETAIL control mode ( level 0 ~ 31 )
When the level is up, the sharpness will increase.
Control this level to get your best picture quality.
If the level is to high, you can get an unnatural image.
RESET / RETURN
8) DEFAULT : Use to reset your camera to FACTORY DEFAULT setting.
9) PAGE 1: Save the setting of NEXT PAGE function and then move
to SETUP menu.
PROBLEM SOLUTION
Nothing appears on
the screen
● Check the power cable and line connection
Between the camera and monitor.
● Check that you have properly connected the
VIDEO cables
The image on the
screen is dim.
● Is the camera lens stained with dirt?
Clean the lens with a soft and clean cloth.
● Adjust the monitor as required.
● If the camera is exposed to very strong light,
Change the camera position.
● Adjust the lens focus properly.
The image on the
screen is dark.
● Adjust the contrast feature of the monitor
● If you have an interediate device, set the
75
Ω / Hi-z properly.
The camera is not
working properly
and the surface of
the camera is hot.
● Check that you have properly connected the
Camera to an appropriate power source.
MOTION DETECTION
function is not active.
● Have you set " MOTION DET" menu to off?
● Have you set " MD AREA " properly?
30
If you have trouble when operating your camera, please check the following
TROUBLE SHOOTING
PROBLEM SOLUTION
The color of the
picture is not
matched.
● Check that you have properly set the "WHITE BAL" menu
The image on the
screen flickers.
● Is the camera facing direct sunlight or fluorecent
lighting? Change the camera position.
L/L mode isn't able
to be selected.
● Have you connected the camera to DC power
source? Connect it to AC power source.
31
TROUBLE SHOOTING
If you have trouble when operating your camera, please check the following
LOW LIGHT INTENSIFIER / BUILT IN - SELECTABLE TO 128 X
MODEL HT - INTB8
Image Pick-Up Device 1/3" SONY SUPER HAD CCD - 410K
TV System
NTSC
Total Pixels NTSC = 811(H) * 508(V)
Effective Pixels NTSC = 768(H) * 494(V)
Scanning Frequency NTSC = 15.734KHz(H) / 59.94Hz(V)
Scanning System 2:1 Interlaced
Synchronization Internal / Line Lock
Resolution 560 TV Lines
Minimum Illumination 0.002 LUX Intensifier @ 128 X
S / N Ratio More than 50db ( Weight On )
White Balance ATW / AWC / MANUAL ( 1800'K ~ 10,500'K )
Video Output Composite Video 1.0Vp - p75ohm / Test Connection
Electronic Shutter Speed NTSC = Auto / Manual ( 1/60 sec ~ 1/120,000 sec )
OSD Built - In - Controlled by Internal Buttons
SLC( Speco Light Compensation ) Low - Middle - High - Off Selectable
Auto Gain Low - Middle - High - Off Selectable
Reduce Noise Low - Middle - High - Off Selectable
Day & Night ( Color ) On / Auto Selectable ( Electrical )
Sharpness On / Off ( Level Adjustable )
Privacy On / Off ( 4 Programmable Zone )
Power Supply Dual Voltage 12 V DC & 24V AC
Power Comsumption 350mA
Lens DC Auto iris Varifocal Lens ( 2.8mm ~ 12mm )
Operation Temp.
Storage Temp.
Demension 100mm(W) * 125mm(H) * 208mm(D)
Weight Approx. 1400(g)
32
- 10 ~ 50 Deg C., RH 95% Max.
- 20 ~ 60 Deg C., RH 95% Max.
SPECIFICATION
* Settings can be made using the 5 buttons
on the front of the camera.
* Unscrew the front of the camera to gain access
to these controls and the video test connector
34
HOW TO INSTALL
Dimension & Installation
How to install
Camera adjustment
LIMITED WARRANTY
VIDEO AUDIO
CAMERA 5 Years
In Door Speaker 15 Years
MONITOR
1 Year Out Door / Weatherproof Speaker 2 Years
IR LEDs
90 Days
Amplifiers
5 Years
Time Labse VCR
PA Horns, Micro Phones,
2 Years
Drum Assembly & Heads
Metal Detectors, Volume Controls
DVRs
1 Year
Megaphones
90 Days
TN, TT,TS, PC Series 3 Years
Electrical Equipment, Not Listed
90 Days
Above & Balance of Line
Warranty
We warranty all products to be free from any manufacturing or material defects.
This warranty will not extend to any products which have been subjected to
misuse, neglect, accident, or improper installation, used in violation of
instructions furnished by us; or to units which have been repaired or altered
outside of the factory. this limited warranty does not apply to broken cases,
batteries, or other physically damaged parts. Upon request by the customer, the
company will at the customer's expense repackage merchandise in new cartons,
replace missing accessories, and return in resalable conditional. Unless
requested, the company will replace and return all merchandise in the
packaging in which it was received. This warranty is in lieu of all expressed
warranties, expressed or implied, and of all obligations or liability on our part,
And we neither assume nor authorize any representative or other person to
assume for us any obligation or liability. In no event shall we be liable for
incidental or consequential damages arising from the use of the product, or for
any delay in the use of this product do to causes beyond our control. Some
states do not allow limitations of how long an implied warranty lasts and/or do
not allow the exclusion or limitation of consequential damages. The above
limitations on implied warranty and consequential damages may not apply to
you. This warranty gives you specific legal rights. You may have other rights
which vary from state to state. See actual warranty statement included with
product for limitations and exclusions where applicable. This limited warranty
extends to products listed in the company's current price schedule.
35
WARRANTY
M E M O
36
M E M O
37
M E M O
38
Loading...