Speco HT7248TM2 Specsheet
HD-TVI 2MP Intensier® Motorized Zoom Focus
IP6
7
FOCUS
HEATER
FULL
HD
Dome Camera with Junction Box
HT7248TM2
2.7-12mm varifocal motorized lens, dark gray housing
Features
•Full HD resolution over coax
•Supports up to Full HD 1080p @ 30fps
•True WDR operation
•Superior low-light performance
•Amplify existing light with no distance limitation
•Zoom/Focus control via coax
•With presets for different scenarios
•Signal distance up to 1600 ft.
(depending on coax quality)
1
•Full OSD operation through on-board
control and UTC (up the coax)
Camera Specifications
Image Sensor 1/3” Sony Exmor CMOS, 2MP
Effective Pixels 1985 (H) x 1105 (V)
Total Pixels 2001 (H) x 1121 (V)
Resolution 1920x1080 @30fps
Minimum Illumination 0.01 lux
Scanning System Progressive
Video Output 1920 x 1080 25p/30p, TVI/CVBS
S/N Ratio More than 52dB (AGC OFF/Weight ON)
AGC 0 ~ 10 (adjustable)
Electronic Shutter Auto / Manual / Flicker
Brightness 0-20 (adjustable)
Sense-up Auto/OFF (selectable limit x2 ~ x32)
WDR Normal/ROI
Day/Night Auto / Color / BW
Motion Detection On / Off (4 zones)
Privacy Masking On / Off (16 zone)
•Built-in heater and anti-fog glass reduces condensation
•Chameleon Cover™: snaps on and can
be painted to match any décor!
•3 axis lens mount
•12VDC & 24VAC dual voltage operation
•Vandal / tamper resistant
•IP67 compliant, weather resistant
•5 year warranty
ZOOM
2
Included
Junction Box
A
E
Shown with included paintable,
snap-on Chameleon Cover
™
Y
W
A
R
R
A
White Balance Auto / AWB / AWB-Set / Manual
Digital Noise Reduction Off / Low / Middle / High
Mirror On / Off
V-Flip On / Off
Sharpness 0 ~ 10 (adjustable)
Lens Shading On / Off
Test Monitor Output CVBS
Communication UTC (up the coax)
Operating & Unit Specifications
Power Supply 12VDC / 24VAC dual voltage (power supply not included)
Power Consumption 12VDC, 360mA max. / 24VAC, 145mA max.
Operating Temperature -40°F ~ 140°F
Operating Humidity 0% - 95% RH
Unit Dimensions 3.89” (H) x 5.12” (Dia.)
Unit Weight 1 lbs.
Certifications FCC, RoHS
R
Y
T
N
Optional Accessories
INTPM
Pendant
Mount
INTCM
Corner/Pole Adapter
INTWM
Wall Mount
(use with INTWM only)
1
To preserve signal quality and distance, Speco Technologies recommends using coax with a 100% copper center conductor and at least 95% braided copper shield. 2Chameleon Cover™ - for best results when
used outdoors, waterproof paint is recommended. 2Speco Technologies is constantly developing and improving products. We reserve the right to modify product design and specifications without notice and without
incurring any obligation. Spec Rev. 6/24/19
800-645-5516 • Fax: 631-957-9142 or 631-957-3880 • specotech.com
DFM
Tile Ceiling
Flush Mount
TVIUTPPT
HD Video Transceiver
with Pigtail (Balun)
TVIUTP
HD Video
Transceiver
PSW4
24VAC
Power Supply
PSW5
12VDC
Power Supply
Loading...