INSTRUCTION
MANUAL
Intense-IR Series 1000TVL
HT7040K
(IR Bullet Camera)
HT6040K
(IR Turret Camera)
HT5940K
(IR Dome Camera)
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 02/01/2014
Contents
◑
Contents ...................................................... 1
◑
Precautions ................................................. 2, 3
◑
Safety Instructions ...................................... 4
◑
Package Contents ....................................... 5
◑
Camera Installation ..................................... 6 -11
◑
Specications .............................................. 12-14
◑
Camera Dimension ..................................... 15-16
◑
Features ...................................................... 17
◑
OSD Menu Details ...................................... 18- 41
◑
Trouble Shooting ......................................... 42
1
Precautions
Do not install the camera in
extreme temperature conditions.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
Never keep the camera pointed
directly at strong light.
Do not install the camera under
unstable lighting conditions.
Severe lighting change or flicker can
cause the camera to work improperly.
Do not drop the camera or subject
it to physical shocks.
Do not touch the front lens of the
camera.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
Do not expose the camera to
radioactivity.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
Housing damage can compromise
weatherproof ratings.
will fail.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.
2
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
In USA and Canada, Use Class 2 Power Supply Only
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
☞Do NOT use power sources other than those specified.
3
Safety Instructions
Precautions for use
◑
This camera should be installed by qualied personnel only
◑
There are no user serviceable parts inside
◑
Do not disassemble this camera other than to make initial adjustments
◑
Use a UL approved regulated 24 volt AC or 12 volt DC power supply
◑
Use appropriate low voltage power cable to prevent re or electrical shock
◑
Please insure that your installation area can support the weight of the camera
Please handle this camera carefully :
◑
Do not use a strong or abrasive detergent when cleaning the camera
◑
Do not install near cooling or heating device
4
Package Contents
Please make sure that the following items are included in the Package:
1) HT7040K
• 1 Video Test Connector, Power Jack
• 1 Focus Adjustment
• 1 Bracket Base
• 1 Wrench
• Set Screw
- 4 Tapping Screws 4x25
- 4 Hexagon Socket Screws M5x10
2) HT6040K
• 1 Video Test Connector, Power Jack
• 2 Wrenches
• Set Screw
- 3 Tapping Screws 4x25
3) HT5940K
• 1 Video Test Connector, Power Jack
• 1 Chameleon Cover
• 1 Wrench
• Set Screw
- 3 Tapping Screws 3.5x20
5
CAMERA INSTALLATION
jvuulj{Gwv~lyGjhislG
XUG~oluG|zpunGXYG}vs{zGkjGOGG\WWGhPG
YUG~oluG|zpunGY[G}vs{zGhjGO[WG}GhP
ZUGjvuulj{G}pklvGjhislG
Tjvuulj{GiujGjhislG{vG{olGiujGqhjrUG
kjGXY}Gw Gz
wGpGaylk
jGaGORP
ishjraOTP
ylkORP
wGz
hjGY[}
6
Compatibility
1) HT7040K
CAMERA INSTALLATION
CVCJBB INTJBS INTCM
2) HT6040K
CVCJBD
Adaptor plate(60PLATE) with rubber
→
7
Compatibility
3) HT5940K
CAMERA INSTALLATION
CVCJBD
Adaptor plate(59PLATE) with rubber
→
8
1. HT7040K
3AXIS BRACKET
CAMERA INSTALLATION
WALL
SCREW TS T1, 4X25, TH, SUS, 4EA
SCREW M5X10, HEXAGON SOCKET, SUS, BK, 4EA
9
2. HT6040K
CAMERA INSTALLATION
BALL DOME BASE
SCREW TS T1, 4X25, TH, SUS, 3EA
BALL DOME
BALL DOME BODY
10
3. HT5940K
CAMERA INSTALLATION
VANDAL DOME BASE
SCREW TS T1, 3.5X20, PH, SUS, 3EA
VANDAL DOME BODY
BODY OUTER COVER SPECO
11
Intense-IR Series 1000TVL
DC Auto Iris Varifocal Lens 2.8-12mm
■
SPECIFICATIONS
HT7040K
Image Sensor
Resolution
Effective Pixels
Total Pixels
Scanning System
S/N Ratio
Frame rate
Video Output
Minimum Illumination
LENS
Electronic Shutter Speed
OSD
BLC
HSBLC
WDR (Wide Dynamic Range)
Digital WDR
Day&Night
White Balance
Smart-IR
Sense-Up
Motion Detection
Motion Tracking (Quick Zoom)
OSD output for Anti Shifting
OSD output for Anti Blocking
3D DNR
Defog
Brightness
AGC
Privacy Masking
Mirror / V-FLIP
Sharpness
LensShading Compensation (LSC)
RS-485(Protocol)
View Angle
CVBS OUTPUT
Communication
Language
Power Supply
Power Consumption
Storage Temperature
Operating Temperature
Lens
Dimension
Weight
1/3" 1.3MP SONY Sensor
1000TV Lines
1305(H) X 1049(V), 1.37M Pixels
1312(H) X 1069(V), 1.40M Pixels
Progressive Scan
More than 50dB
MAX 50P/60P
CVBS : 1.0Vp-p/75 Ohm
0Lux(Sens-up x32)
DC/MANUAL
AUTO / Manual(1/60Sec ~ 1/60000Sec) / FLICKER
Built-in
O
O
ON(LOW,MIDDLE,HIGH) / OFF
ON(LOW/MIDDLE/HIGH) / OFF
Color/BW/Auto/EXT
AUTO/AUTO ext/AWC->SET/MANUAL
0~20(Level Adjustable), Default : 0
x2 ~ x32, Default : x8
ON / OFF (Programmable 4 Zones)
ON/OFF
ON/OFF
ON/OFF
OFF/LOW/MIDDLE/HIGH
ON(AUTO/MANUAL) / OFF
0~20 (Level Adjustable), Default : 10
0~20 (Level Adjustable), Default : 20
ON / OFF (Programmable 16 Zones)
ON/OFF
0~15 (Level Adjustable), Default : 7
ON/OFF
Available
WIDE 4:3 / Normal / WIDE 16:9
NTSC / PAL selectable
Coaxial Control
English
DC12V/AC24V Dual Voltage Operation
IR LED ON:DC 12V 700mA/AC 24V 350mA, IR LED OFF:DC 12V 230mA/AC 24V 120mA
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
DC Auto Iris Varifocal Lens(2.8mm-12mm)
3.94"(W) * 3.94"(H) * 8.27"(D)
3.09 Ibs
HT7040K
12
Intense-IR Series 1000TVL
DC Auto Iris Varifocal Lens 2.8-12mm
■
SPECIFICATIONS
HT6040K
Image Sensor
Resolution
Effective Pixels
Total Pixels
Scanning System
S/N Ratio
Frame rate
Video Output
Minimum Illumination
LENS
Electronic Shutter Speed
OSD
BLC
HSBLC
WDR (Wide Dynamic Range)
Digital WDR
Day&Night
White Balance
Smart-IR
Sense-Up
Motion Detection
Motion Tracking (Quick Zoom)
OSD output for Anti Shifting
OSD output for Anti Blocking
3D DNR
Defog
Brightness
AGC
Privacy Masking
Mirror / V-FLIP
Sharpness
LensShading Compensation (LSC)
RS-485(Protocol)
View Angle
CVBS OUTPUT
Communication
Language
Power Supply
Power Consumption
Storage Temperature
Operating Temperature
Lens
Dimension
Weight
1/3" 1.3MP SONY Sensor
1000TV Lines
1305(H) X 1049(V), 1.37M Pixels
1312(H) X 1069(V), 1.40M Pixels
Progressive Scan
More than 50dB
MAX 50P/60P
CVBS : 1.0Vp-p/75 Ohm
0Lux(Sens-up x32)
DC/MANUAL
AUTO / Manual(1/60Sec ~ 1/60000Sec) / FLICKER
Built-in
O
O
ON(LOW,MIDDLE,HIGH) / OFF
ON(LOW/MIDDLE/HIGH) / OFF
Color/BW/Auto/EXT
AUTO/AUTO ext/AWC->SET/MANUAL
0~20(Level Adjustable), Default : 0
x2 ~ x32, Default : x8
ON / OFF (Programmable 4 Zones)
ON/OFF
ON/OFF
ON/OFF
OFF/LOW/MIDDLE/HIGH
ON(AUTO/MANUAL) / OFF
0~20 (Level Adjustable), Default : 10
0~20 (Level Adjustable), Default : 20
ON / OFF (Programmable 16 Zones)
ON/OFF
0~15 (Level Adjustable), Default : 7
ON/OFF
Available
WIDE 4:3 / Normal / WIDE 16:9
NTSC / PAL selectable
Coaxial Control
English
DC12V/AC24V Dual Voltage Operation
IR LED ON:DC 12V 450mA/AC 24V 190mA, IR LED OFF:DC 12V 260mA/AC 24V 130mA
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
DC Auto Iris Varifocal Lens(2.8mm-12mm)
4.65"(Dia) * 3.80"(H)
1.99 Ibs
HT6040K
13
Intense-IR Series 1000TVL
DC Auto Iris Varifocal Lens 2.8-12mm
■
SPECIFICATIONS
HT5940K
Image Sensor
Resolution
Effective Pixels
Total Pixels
Scanning System
S/N Ratio
Frame rate
Video Output
Minimum Illumination
LENS
Electronic Shutter Speed
OSD
BLC
HSBLC
WDR (Wide Dynamic Range)
Digital WDR
Day&Night
White Balance
Smart-IR
Sense-Up
Motion Detection
Motion Tracking (Quick Zoom)
OSD output for Anti Shifting
OSD output for Anti Blocking
3D DNR
Defog
Brightness
AGC
Privacy Masking
Mirror / V-FLIP
Sharpness
LensShading Compensation (LSC)
RS-485(Protocol)
View Angle
CVBS OUTPUT
Communication
Language
Power Supply
Power Supply
Storage Temperature
Operating Temperature
Lens
Dimension
Weight
1/3" 1.3MP SONY Sensor
1000TV Lines
1305(H) X 1049(V), 1.37M Pixels
1312(H) X 1069(V), 1.40M Pixels
Progressive Scan
More than 50dB
MAX 50P/60P
CVBS : 1.0Vp-p/75 Ohm
0Lux(IR LED ON)
DC/MANUAL
AUTO / Manual(1/60Sec ~ 1/60000Sec) / FLICKER
Built-in
O
O
ON(LOW,MIDDLE,HIGH) / OFF
ON(LOW/MIDDLE/HIGH) / OFF
Color/BW/Auto/EXT
AUTO/AUTO ext/AWC->SET/MANUAL
0~20(Level Adjustable), Default : 0
x2 ~ x32, Default : x8
ON / OFF (Programmable 4 Zones)
ON/OFF
ON/OFF
ON/OFF
OFF/LOW/MIDDLE/HIGH
ON(AUTO/MANUAL) / OFF
0~20 (Level Adjustable), Default : 10
0~20 (Level Adjustable), Default : 20
ON / OFF (Programmable 16 Zones)
ON/OFF
0~15 (Level Adjustable), Default : 7
ON/OFF
Available
WIDE 4:3 / Normal / WIDE 16:9
NTSC / PAL selectable
Coaxial Control
English
DC12V/AC24V Dual Voltage Operation
IR LED ON:DC 12V 510mA/AC 24V 210mA, IR LED OFF:DC 12V 270mA/AC 24V 120mA
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
DC Auto Iris Varifocal Lens(2.8mm-12mm)
4.72"(Dia) * 3.35"(H)
2.20 Ibs
HT5940K
14
1) HT7040K
CAMERA DIMENSION
3.94” dia
3.38”
2.95”
2) HT6040K
3.01”
4.80”
8.27”
3.46”
4.65” dia
3.80”
2.66”
3.01”
15
3) HT5940K
CAMERA DIMENSION
3.23” dia
4.72” dia
3.35”
1.82”
16
General Features
●
1000 TV Lines
1.3 MEGA HD ANALOG 1000 TVL combined with SONY EXMOR SENSOR (IMX 138)
●
WDR (Wide Dynamic Range)
A powerful and ultra-advanced technology that captures cleaner and superior high resolution picture
even where images appear dark because there is a strong back light present.
●
PRESET
Preset (Indoor, Outdoor, Low light, Hallway, Lobby, Elevator) is provided to maximize user convenience.
●
DNR (Digital Noise Reduction)
SMART 3D DNR prevents the image blurring of moving objects and activates only when moving
objects appear on the scene.
●
SMART IR
No saturation image, vivid image in darkness. it makes very sharp video image in darkness.
This technology eliminates saturation of video image of the closer object in darkness by control
of the IR sensitivity.
●
SENS UP
Sens-Up - Max. up to x32 helps get dark images visible and make it clear images in a low light
environment.
●
DEFOG
Defog function improve the clarity of images taken in poor conditions such as fog, smoke, rain
or snow.
●
CVBS (Composite Video Blanking and Sync)
TV System is switchable into 'NTSC' or 'PAL' with built-in OSD.
●
INTELLIGENCE
An extraordinary technology enables to become an ultimate analog solution by providing
intelligent features based on motion tracking. it strengthens crime prevention & detection.
17
How to Set Up the camera menu
Setup Menu
●
PRESET MODE MENU
PRESET
MAIN SETUP
EXIT
LENS
EXPOSURE
INDOOR OUTDOOR LOW LIGHT HALL WAY LOBBY ELEVATOR
D
C
MANUAL
MAIN SETUP
MODE
RETURN
MODE NORMAL / DEBLUR
RETURN
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
INDOOR / OUTDOOR/ DEBLUR
0 ~ 20
AUTO
MANUAL
FLICKER
OFF / X2 ~ X32
0 ~ 20
SPEED 1/60 ~ 1/60000
RETURN
WHITE BAL
BLACKLIGHT
ATW
AWB
AWC-SET
MANUAL
OFF
HLC
BLC
WDR
KELVIN
R-GAN
B-GAN
RETURN
LEVEL
MODE
RETURN
H-POS
V-POS
H-SIZE
V-SIZE
RETURN
WEIGHT
RETURN
LOW / MIDDLE / HIGH
0 ~ 20
0~ 20
0 ~ 20
ALL DAY / NIGHT ONLY
0 ~ 20
0 ~ 20
0 ~ 20
0 ~ 20
LOW / MIDDLE / HIGH
18
Setup Menu
●
DNR
How to Set Up the camera menu
OFF
LOW
MIDDLE
HIGH
SMART IR 0 ~ 20
AGC THRES 0 ~ 20
DAY&NIGHT
IMAGE
AUTO
COLOR
B/W
EXTERN
AGC MARGIN 0~ 20
DELAY LOW / MIDDLE / HIGH
RETURN
SMART IR
RETURN
SMART IR
EXTERN S/W
D
A
Y
L
E
RETURN
SHARPNESS
GAMMA
PEDSTAL
COLOR GAIN
MIRROR
FLIP
RETURN
COM.
0 ~ 20
0 ~ 20
LOW/HIGH
LOW/MIDDLE/HIGH
0 ~ 10
0.45 ~ 0.65
0 ~ 20
0 ~ 20
OFF / ON
OFF / ON
CAM ID
BAUDRATE
0 ~ 255
2400 / 4800 / 9600 / 57600 / 115200
SYSTEM
RETURN
WIDE 4 : 3
VIEW ANGLE
CVBS
LANGUAGE
RESET
RETURN
WIDE 16 : 9
NORMAL
NTSC / PAL
ENG / CHN / CHN(S) / JAN / KOR
ON PUSHING
XY ADJUST
XY ADJUST
19
Setup Menu
●
How to Set Up the camera menu
SPECIAL
EXIT
D-ZOOM
D-WDR
DEFOG
SHADING
PRIVACY
INTELLIGENT
1.0X ~ 8.0X
OFF / LOW / MIDDLE / HIGH
OFF
ON
OFF
ON
OFF
ON
MTN TRACKER
ALARM
QUICK ZOOM
RETURN
MODE
LEVEL
RETURN
WEIGHT
RETURN
ZONE NUM
ZONE DISP
H-POS
V-POS
H-SIZE
V-SIZE
Y LEVEL
CR LEVEL
CB LEVEL
RETURN
ON
ANTI-SHIFT
SHIFT SCALE
ANTI-BLOCK
BLOCK SCALE
RETURN
MOVING
ZOOM IN
STANDBY
SYNCHRONOUS
TRACKING
REPEAT
RETURN
AUTO
MANUAL
LOW
MIDDLE
HIGH
0 ~ 100%
0 ~ 15
ON / OFF
0 ~ 40
0 ~ 32
0 ~ 40
0 ~ 32
0 ~ 20
0 ~ 20
0 ~ 20
DET . SETTING
WINDOW TONE
WINDOW ZONE
WINDOW USE
DET H-POS
DET V -POS
DET H - SIZE
DET V - SIZE
R
N
U
R
E
T
N
O
O
F
F
/
~
0
0
2
N
O
O
F
F
/
~
0
0
2
0
~
4
0
2
s
e
c
0
~
4
0
2
s
e
c
0
~
4
0
2
s
e
c
N
O
O
F
F
/
N
O
O
F
F
/
N
O
O
F
F
SENSITIVITY 0 ~ 20
OBJ KEEP LV 0 ~ LV 60
MOTION EST 0 ~ 20
SIGNAL OUT OFF / ON
RETURN
0 ~ 6
0 ~ 3
OFF / ON
0 ~ 40
0 ~ 32
0 ~ 40
0 ~ 32
20
MENU
Menu setting can be selected by the button inside the camera.
1. Press the set button.
* MENU will be displayed on the monitor.
◆ MENU
→ PRESET : Preset is provided to maximize user convenience.
( PRESET : Indoor // Outdoor // Low light // Hallway // Lobby // Elevator )
SPECO TECH
1. PRESET
2. MAIN SETUP
3. EXIT
INDOOR
→ MAIN SETUP : Enter the MAIN SETUP to adjust further settings.
SPECO TECH
1. PRESET
2. MAIN SETUP
3. EXIT
INDOOR
21
MENU SETUP
Menu setting can be selected by the button inside the camera.
1. Press the set button.
* The Set Up menu will be displayed on the monitor.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
AUTO
2. Move and select the required function using the Up and Down button.
* Move the triangular indicator Up or Down to select the desired feature by pressing
the Up or Down button.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
AUTO
22
3. Change menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After Changing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.
NOTE
* Move to the available submenu by moving arrow to desired feature.
* Submenu is not available when this symbol displayed “---“.
1. LENS
This function is to adjust the brightness of the monitor.
1. Move the triangular indicator to LENS using the Up and Down buttons on the Set Up menu screen.
2. Select the desired lens type by pressing the Left of Right button.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
AUTO
23
NOTE
* On DC mode, you can select INDOOR, OUTDOOR, or DEBLUR depending on the
installation environment.
* On MANUAL mode, you can select NORMAL or DEBLUR depending on the
installation environment.
2. EXPOSURE
On this manu, users can control exposure by selecting one of modes (Brightness, Shutter, Sens-up, AGC)
1. Move the triangular indicator to EXPOSURE on the SETUP menu screen using the Up and Down button
2. Select the desired mode using the Left or Right buttons.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
AUTO
◆ EXPOSURE
→ BRIGHTNESS : It is used to adjust overall brightness level.
( BRIGHTNESS : 0 ~ 20 // default value : 10 )
BRIGHTNESS
SHUTTER
SENSE-UP
AGC
RETURN
2. EXPOSURE
IIIIIIIIII IIIIIIIIII|
AUTO
X16
IIIIIIIIII IIIIIIIIII|
10
15
24
→ SHUTTER : Users adjust electronic shutter speed by selecting one of modes(AUTO, MANUAL, FLICKER).
2. EXPOSURE
BRIGHTNESS
SHUTTER
SENSE-UP
AGC
IIIIIIIIII IIIIIIIIII|
MANUAL
X16
IIIIIIIIII IIIIIIIIII|
10
15
RETURN
Manaul mode : shutter speed is adjustable from 1/60 up to 1/60,000.
SHUTTER
SPEED
RETURN
1/60
→ SENSE-UP : The brighter image can be displayed by operating digital slow shutter speed in low light environment.
( digital slow shutter : x2 ~ x32 // default value : x16)
BRIGHTNESS
SHUTTER
SENSE-UP
AGC
RETURN
→ AGC : the brighter image can be displayed by adjusting AGC(Auto Gain Control) level.
2. EXPOSURE
IIIIIIIIII IIIIIIIIII|
MANUAL
X16
IIIIIIIIII IIIIIIIIII|
10
15
( AGC : 0 ~ 20 / default : 15 // default value : 15 )
2. EXPOSURE
BRIGHTNESS
SHUTTER
SENSE-UP
AGC
RETURN
IIIIIIIIII IIIIIIIIII|
MANUAL
X16
IIIIIIIIII IIIIIIIIII|
10
15
25
3. WHITE BALANCE
Use this function when the color adjustment of a screen is needed.
1. Move the triangular indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the left or Right button.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
AUTO
Use the appropriate mode according to your purposes among these three modes.
* ATW Use this mode when the color temperature is from 1,800K to 10,500K.
* AWB The function to search for the color which is matched well with the ambient environment. This
:
:
be used when the color temperature is from 3,000K to 7,000K.
* AWC→SET After letting camera focus on the blank white paper to the best condition of current
:
lighting environment, press the SET button. If the lighting condition is changed, Re-adjustment
should be needed.
* MANUAL Manual compensation make the more detailed control possible. First, after adjusting the
:
white balance using the ATW or AWB mode, change the mode into the manual compensation mode
and then press Set button. While looking at the color change of the subject seen on the screen after
setting up the proper color temperature, increase the each value of the blue and the red.
MANUAL
KELVIN
R-GAIN
B-GAIN
RETURN
MIDDLE
IIIIIIIIII IIIIIIIIII|
IIIIIIIIII IIIIIIIIII|
10
10
26
NOTE
The White Balance may not be worked properly in the following conditions. If this doesn’t
work, use the AWB mode.
* When there is a very high color temperature in the circumstances of the subject.
( for example, clear sky, Sunset)
* It is very dark.
* If the camera is headed to the fluorescent light directly or if there is a drastic lighting
change, The operation of White balance may become unstable.
4. BACK LIGHT
On this menu, back light image can be compensated by users selecting one of modes (HLC, BLC, and WDR).
1. Move the triangular indicator to BACKLIGHT on the SETUP menu screen using the Up and Down button
2. Select the desired mode using the Left or Right buttons.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
AUTO
27
◆ HLC (Highlight Light Compensation) : When there is a car head light turned on
at the entrance of the gas station or in some place in the parking lot, the numbers of the car plate
can be recognized by blocking only the light from the car headlight. At the area is set up specifically,
you can recognize the car plate numbers by blocking the strong light signal.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
LEVEL
MODE
RETURN
HLC
DC
ATW
HLC
MIDDLE
AUTO
IIIIIIIIII IIIIIIIIII|
ALL DAY
10
Nomarl HLC
28
◆ BLC (Back Light Compensation) : The camera with 3D-DNR provides the intelligent light level control to
overcome strong backlight conditions.
→ BLC : The set up area can be seen vividly by the user who set up the desired area to compensate the
back light directly according to the installation environment.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
V-POS
H-SIZE
V-SIZE
RETURN
DC
ATW
BLC
MIDDLE
AUTO
BLC
7
5
6
4
H-POS
V- P O S
H-SIZE
V- S I Z E
Adjust the H(Horizontal)-position of the BLC area.
Adjust the V(Vertical)-position of the BLC area.
Adjust the H(Horizontal)-size of the BLC area.
Adjust the V(Vertical)-size of the BLC area.
29
◆ WDR(wide dynamic range) : the function is intended to provide clear images even
under back
light circumstances where intensity of illumination can vary excessively, namely when there
are both very bright and very dark areas simultaneously in the field of view of the camera.
( To adjust WDR level, select the LOW, MIDDLE, HIGH by pressing the left or the right button )
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
WDR
MIDDLE
AUTO
WDR
WEIGHT
HIGH
RETURN
WDR OFF WDR ON
30
5. DNR
This function makes the noise of the low light background decrease and is a highlighted feature.
1. Move the triangular indicator to DNR on the SETUP menu screen using the Up and Down button
2. Select one of modes(OFF, LOW, MIDDLE, HIGH) to use DNR by pressing the Right or Left button.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
AUTO
NOTE
* If DNR function is activated, digital noise om image get reduced.
The higher the compensation proportion raises, the better noise cancellation effect is.
However, high DNR value might cause ghost effect on image to occur.
31
6. DAY&NIGHT
You can change the color mode of color or black / white by setting up the mode.
1. Select DAY&NIGHT using the Up or Down button on the Set Up menu screen.
2. Select one of modes (EXTERN, AUTO, COLOR, B/W) using the Left or Right buttons.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
AUTO
◆ EXT : it can change into COLOR or B/W mode automatically through the connection with the ground terminal.
Users can adjust SMART-IR level (0 ~ 20), EXTERN S/W Level, and working time of the D/N filter.
6. DAY&NIGHT
SMART IR
EXTERN S / W
DELAY
RETURN
IIIIIIIIIIIIIIIIIIII
| |
LOW
LOW
0
◆ Auto : Automatically, It shifts into the color mode in the bright environment and the B/W mode in the
low light condition. It can adjust the delay time, starting brightness and end brightness according to the
ambient conditions by pressing the Set button.
6. DAY&NIGHT
SMART IR
AGC THRES
AGC MARGIN
DELAY
IIIIIIIIIIIIIIIIIIII
| |
|
IIIIIIIIIIIIIIIIIIII
10
|
IIIIIIIIIIIIIIIIIIII
10
0
|
|
|
|
LOW
RETURN
* SMART IR : It is used to compensate IR saturation (0 ~ 20)
* AGC THRES : AGC threshold level (0 ~ 20)
* AGC MARGIN : AGC D/N margin level (0 ~ 20)
32
◆ COLOR : Making the video output color always.
◆ B / W : Making the video output B/W always. By selecting the color signal On or Off, this lets the burst
signal be disappeared or not.
6. DAY&NIGHT
SMART IR
| |
IIIIIIIIIIIIIIIIIIII
0
RETURN
7. IMAGE
This can be used when you want to select the additional function control.
1.When the SETUP menu is displayed, select IMAGE using the Up and Down button.
2. Select one of the mode using the Left or Right buttons.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
AUTO
SHARPNESS
GAMMA
PEDESTAL
COLOR GAIN
MIRROR
FLIP
RETURN
7. IMAGE
33
IIIIIIIIII IIIIIIIIII|
0.55
IIIIIIIIII IIIIIIIIII|
IIIIIIIIII IIIIIIIIII|
OFF
OFF
7
8
10
◆ IMAGE
→ SHARPNESS : the outline of an image becomes sharp and more distinct as the level of sharpness increases.
It has better be used to adjust the value to the proper one depending on a sort of image.
( SHARPNESS : 0 ~ 20 )
→ GAMMA : Gamma value is adjustable ( GAMMA : 0.45 ~ 0.65 )
→ PEDSTAL : Pedstal value is adjustable ( PEDSTAL : 0 ~ 20 )
→ COLOR GAIN : Color gain value is adjustable ( COLOR GAIN : 0 ~ 20 )
→ MIRROR : The image of the monitor is reversed horizontally.
→ FLIP : The image of the monitor is reversed vertically.
8. SYSTEM
This can be used when you want to select the additional function control.
1.When the SETUP menu is displayed, select SYSTEM using the Up and Down button.
2. Select one of the mode using the Left or Right buttons.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
AUTO
34
8. SYSTEM
COM.
VIEW ANGLE
CVBS
LANGUAGE
RETURN
WIDE 4 : 3
NTSC
ENG
◆ SYSTEM
→ COM : this menu is used for RS-485 communication.
Users are able to select 'CAM ID (0 ~ 255)' and 'BAUDRATE (2400 / 4800 / 9600 / 57600 / 115200)'.
COM.
CAM ID
BAUDRATE
RETURN
→ VIEW ANGLE : users are able to adjust aspect ratio by selecting 'WIDE 4:3', 'WIDE 16:9' or 'NORMAL'
1
115200
depending on monitor aimed for surveilance. (default value : WIDE 4:3)
8. SYSTEM
COM.
VIEW ANGLE
CVBS
LANGUAGE
RETURN
WIDE 4 : 3
NTSC
ENG
35
SYSTEM
SYSTEM
COM.
VIEW ANGLE
XY ADJUST
LANGUAGE
RETURN
WIDE 16 : 9
ENG
COM.
VIEW ANGLE
XY ADJUST
LANGUAGE
RETURN
NORMAL
ENG
For further adjustment, please enter into 'XY ADJUST' on 'WIDE 16:9' or 'NORMAL'.
XY ADJUST
LEFT / RIGHT
UP /DOWN
ENTER - RETURN
(+0 /±0)
(+0 /±120)
LEFT / RIGHT
ENTER - RETURN
XY ADJUST
UP /DOWN
(+0 /±160)
(+0 /±120)
→ CVBS : TV system is manually switchable to 'PAL' or 'NTSC' on CVBS(Composite Video Blanking and Sync).
36
9. SPECIAL
This can be used when you want to select the additional function control.
1.When the SETUP menu is displayed, select SPECIAL using the Up and Down button.
2. Select one of the mode using the Left or Right buttons.
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
AUTO
D-ZOOM
D-WDR
DEFOG
SHADING
PRIVACY
INTELLIGENT
RETURN
◆ SPECIAL
→ D-ZOOM : diginal zoom supports up to x8 available (x1 ~ x8)
The higher the digital zoom magnification is, the lower the resolution is.
SPECIAL
1. 0X
OFF
OFF
OFF
OFF
37
→ D-WDR : This camera which is using 3D-DNR DSP provides intelligent light level control to overcome
even strong backlight conditions. (OFF / LOW / MIDDLE / HIGH)
→ DEFOG : This function helps to recognize the object in a foggy or dusty weather condition.
DEFOG
MODE
LEVEL
RETURN
DEFOG OFF
AUTO
MIDDLE
DEFOG ON
→ SHADING : It is used to increase brightness in case angle of lens set as wide cause darker image
on both sides than that on the center.
SHADING
WEIGHT
RETURN
100%
→ PRIVACY : This is used to hide certain areas on the monitor. You can designate each different 15 area.
The size of a designated area can be adjusted.
38
PRIVACY
ZONE NUM
ZONE DISP
H-POS
V-POS
H-SIZE
V-SIZE
Y LEVEL
CR LEVEL
VB LEVEL
RETURN
0
OFF
12
2
3
3
IIIIIIIIII IIIIIIIIII|| |
IIIIIIIIII IIIIIIIIII|| |
IIIIIIIIII IIIIIIIIII|| |
10
10
10
→ INTELLIGENT : It is used for crime prevention & detection by providing intelligent functions based on
motion tracking.
INTELLIGENT
MTN TRACKER OFF
ALARM
QUICK ZOOM OFF
RETURN
◆ INTELLIGENT (MTN TRACKER, ALARM, QUICK ZOOM)
1) MTN TRACKER : it is used to adjust a certain area for motion tracking.
DET. SETTING
WINDOW TONE
WINDOW ZONE
WINDOW USE
DET H-POS
DET V-POS
DET H-SIZE
DET V-SIZE
RETURN
MTN TRACKER
0
0
OFF
1
2
16
12
39
2) ALARM : it is used to set 'ANTI-SHIFT' or 'ANTI-BLOCK' based on
motion tracking. scale level of these functions are adjustable.
ALARM
ANTI-SHIFT
SHIFT SCALE
ANTI-BLOCK
BLOCK SCALE
RETURN
ON
|
IIIIIIIIII IIIIIIIIII
| |IIIIIIIIII
ON
IIIIIIIIII
IIIIIIIIII
| |
10
3
* ANTI-SHIFT : If someone intends to change or shift camera direction by their hands or objects,
it will be automatically detected by a warning message(SHIFTING DETECTED !!!)
on monitor.
* ANTI-BLOCK: If someone intentionally block the front of camera by hands or spray, etc.,
it will be automatically detected by a warning message(BLOCKING DETECTED !!!)
on monitor.
40
3) QUICK ZOOM : Digital 'zoom-in' is operated to precisely detect objects when objects get in a designated
motion-detection area. The area setting is available on MTN TRACKER(P. 27).
QUICK ZOOM
MOVING
ZOON IN
STANDBY
SYNCHRONOUS
TRACKING
REPEAT
RETURN
MOTION DETECTED !!!
30 / 60 SEC
30 / 60 SEC
30 / 60 SEC
OFF
OFF
OFF
10. EXIT
MENU
1. LENS
2. EXPOSURE
3. WHITE BAL
4. BACKLIGHT
5. SPECO DNR
6. DAY&NIGHT
7. IMAGE
8. SYSTEM
9. SPECIAL
10. EXIT
DC
ATW
OFF
MIDDLE
AUTO
Press 'EXIT' button to save the current settings and exit the setup menu.
41
●
Trouble Shooting
PROBLEM
Northing appears on
the screen.
The image on the
screen is dim.
The image on the
screen is dark.
The camera is not
working properly
and the surface of
the camera is hot.
POSSIBLE CAUSE
Check the power cable, power supply output and video
F
connection between the camera and monitor.
Are the camera lens or the lens glass dirty?
F
Clean the lens / glass with a soft clean cloth.
Adjust the monitor controls, as required.
F
If the camera is facing a very strong light, change
F
the camera position.
Adjust the lens focus.
F
Adjust the contrast control of the monitor.
F
If there is an intermediate device, correctly set the 75Ω/Hi-z.
F
Check the camera is correctly connected to an appropriate
F
regulated power source.
Motion Detection
is not activated.
The color of the
picture is not correct.
The image on the
screen ickers.
The INTENSIFY does
not work.
Has MOTION DET been set to ON in the menu?
F
Has MD AREA been properly dened?
F
Check the settings in WHITE BALANCE menu.
F
Make sure that the camera isn’t facing direct sunlight or
F
uorescent lighting. If necessary,change the camera position.
Check that the AGC setting in the EXPOSURE menu is not set to OFF.
F
Check the EXPOSURE menu and make sure SHUTTER is set to------.
F
42
43
MEMO
u
44
MEMO
u
45
MEMO
u
46
200 New Highway
Amityville, NY 11701
631-957-8700
1 800 645 5516
www.specotech.com
Loading...