Speco HT66iLHW, HT66iLHB User Manual

INSTRUCTION
MANUAL

960H 700TVL Weather Resistant Intense Light
Miniature Turret

HT66iLHB

HT66iLHW

Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation.

Rev. 9/01/2014

Precautions

•

To avoid electrical shock, do not open the case of this product.

•

Only use a regulated DC 12V Power supply to operate this product.

•

Do not overload electrical outlets or extension cords. This can result in a fire or
electrical shock.

•

Keep this product away from strong magnetic fields.

•

Do not expose this product in direct sunlight or strong reflected rays.

•

Refer servicing to qualified personnel only.
Do not change or modify this product. This will void the warranty.

•

Features

1/3” Inch Color 960H CCD

•

•

700 TV Lines Super High Resolution

•

Compact Size - Only 1.89” In Diameter!

•

Vandal Resistant Housing
Cast Aluminium Construction

•

•

Integrated 2.5mm Fixed Lens

•

Impressive Picture Quality

•

Weatherproof (IP66 Rated)
12V DC Required

•

Installation

s①,

1. Loosen the two locking sc
the mounting base.

2. Attach the mounting base② to a suitable solid surface, such as a wall or ceiling. On
partitioning locate a wall stud or ceiling joist. Secure the mounting base using the

supplied screws③. Fit the camera④ to the mounting base ② and fix in to position
using the two locking screws①, secure them with the hex-head wrench.

3. How to set the angle of view:

Loosen the two locking screws①, using the supplied hex-head wrench, and set

desired camera angle by movin

4. Connect the video connector (BNC) of the camera cable to the incoming video
cable. The other end of the video cable should be connected to a DVR or Monitor.
Plug the camera power connector (red DC jack) into the DC12V regulated power
supply. Switch on the power supply and the picture will be displayed on

rew

using the s

g the camera right /left and

upplied hex-head wrench and remove

the

up/d

own.

a monitor.