
INSTRUCTION  
MANUAL 
960H 700TVL Weather Resistant Intense Light 
Miniature Turret
HT61iLHB
HT61iLHW
Speco Technologies is constantly developing product improvements. 
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
Rev. 9/01/2014

Precautions 
•
To avoid electrical shock, do not open the case of this product. 
•
 Only use a regulated DC 12V Power supply to operate this product. 
•
Do not overload electrical outlets or extension cords. This can result in a fire or 
electrical shock. 
•
Keep this product away from strong magnetic fields. 
•
Do not expose this product in direct sunlight or strong reflected rays. 
•
Refer servicing to qualified personnel only. 
Do not change or modify this product. This will void the warranty. 
•
Features
1/3” Inch Color 960H CCD 
•
•
700 TV Lines Super High Resolution
•
Compact Size - Only 1.89” In Diameter!
•
Vandal Resistant Housing 
Cast Aluminium Construction
•
•
Integrated 3mm Fixed Lens
•
Impressive Picture Quality
•
Weatherproof (IP66 Rated) 
12V DC Required
•
Installation 
1. Loosen the two locking screw 
the mounting base. 
2. Attach the mounting baseཛྷ to a suitable solid surface, such as a wall or ceiling. On  
partitioning locate a wall stud or ceiling joist. Secure the mounting base using the 
supplied screwsཝ. Fit the cameraཞ to the mounting base ཛྷ and fix in to position 
using the two locking screwsཛ, secure them with the hex-head wrench. 
3. How to set the angle of view: 
 Loosen the two locking screwsཛ, using the supplied hex-head wrench, and set the 
desired camera angle by movin
4. Connect the video connector (BNC) of the camera cable to the incoming video 
cable. The other end of the video cable should be connected to a DVR or Monitor.  
Plug the camera power connector (red DC jack) into the DC12V regulated power 
supply. Switch on the power supply and the picture   will be displayed on 
sཛ, 
using the s
g the camera right /left and 
upplied hex-head wrench and remove 
up/d
own.  
a monitor.   

1.89” dia
1.46”
Specifications 
Image Sensor
•
Horizontal Resolution
•
•
Sensitivity
•
Lens
•
Effective Pixels (H x V)
•
Electronic Shutter Speed
•
Scanning System
•
Synchronization
•
Video Output
•
S/N Ratio
•
Gain Control
•
White Balance
GG
•
Sense-Up                      Auto (X32)
IP Rating
•
Operating Temperature
•
Power Supply
•
Power Consumption
•
•
Dimensions
•
Weight
1/3” Inch Color 960H CCD 
700 TV Lines
0.00001 Lux 
3mm Fixed Lens 
NTSC=976 x 494 / PAL=976 x 582 
Auto: 1/50 SEC, 1/60 SEC ~ 1/5,000 SEC 
2:1 Interlace 
Internal
1.0Vp-p~75 Ohm 
>52dB (AGC Off) 
Auto 
ATW
IP66
-4 ~ +140° F 
12V DC Required 
120mA Max.
1.89”(Dia) x 1.46”(H)
0.25 lbs.