Page 1
DIMENSIONS
200 New Highway, Amityville, NY 11701
800-645-5516 / www.specotech.com
2.5”
3.5”
1.1”
2.1”
2.1”
2.5”
[HT600VFH]
1.4”
[HT600H]
1.4”
*Accessory *
1 mounting screw
1.4”
1.6”
CONFIGURATION
[HT600VFH]
[HT600H]
⑥
④
③
⑤
②
①
④
③
⑤
②
①
① DC 12V / ② GND / ③ VIDEO ④ N/C
⑤ OSD Joy-Stick ⑥ IRIS Jack for DC Lens
OSD MENU TREE
EXPOSURE
• ALC / ELC
• LENS
• BRIGHTNESS
DAY&NIGHT
• AUTO • EXT1 • EXT2
WHITE BAL.
• ATW • PUSH • MANUAL
MONITOR
• GAMMA • CHROMA • SHARPNESS • SHADING • PED.LV.
IMAGE
• BACKLIGHT • PRIVACY • CONTRAST • POSI/NEGA • H-MIRROR
• OFF • D-WDR • DEFOG
DNR
• LOW • MIDDLE • HIGH • OFF
MOTION
• ON • OFF
SYSTEM
• CAM TITLE • CAM ID • ID DISP. • SYNC
• LANGUAGE • SPECIAL
EXIT (SAVE/RESTORE/INITIAL)
• SHUTTER
• NIGHT
• RETURN
• DAY
• FLK
• BAUDRATE
• AGC
Page 2
OSD MENU FUNCTIONS
EXPOSURE : Adjusts exposure settings.
ALC (Automatic Light Control) : Used with DC auto iris lens
LENS : Select the lens type (ALC/ELC)
BRIGHTNESS : Adjusts image brightness. (0~ 20)
SHUTTER : Auto / Manual Shutter can be selectable.
You can control manually from 1/50 to 1/120000.
FLK(Flicker Less) : Selects this when picture flickering. The picture flickering can be
caused by a clash with the frequency of the installed lighting.(ON/OFF)
AGC: Adjusts the Automatic Gain Control level. (0~20)
IRIS OFFSET : Adjusts the Iris Offset level. (0~20)
ELC (Electronic Light Control) : Used with manual lens
LENS : select the lens type (ALC/ELC)
BRIGHTNESS : Adjusts image brightness. (0~ 20)
SHUTTER : Auto / Manual Shutter can be selectable.
You can control manually from 1/50 to 1/120000.
FLK(Flicker Less) : Selects this when picture flickering. The picture flickering can be
caused by a clash with the frequency of the installed lighting.
AGC: Adjusts the Automatic Gain Control level. (0~20)
DAY / NIGHT : Adjust Day / Night options.
AUTO : Automatically determines the D/N switching points.
MODE (AUTO) : Selects the Auto mode.
AGC THRS : Adjusts the AGC Threshold level (0~20)
AGC MARGIN : Adjusts the AGG margin level (0~20)
D/N DELAY : Adjusts the calculation time for the trigger(0~15sec)
B/W BURST : Selects the B/W BURST Mode (ON/OFF)
SMART IR : Deactivated function with this type of camera
EXT 1 or 2 : Deactivated function with this type of camera
NIGHT : Full time B/W mode.
MODE (NIGHT) : Selects the NIGHT mode.
B/W BURST : Selects the B/W BURST Mode (ON/OFF)
SMART IR : Deactivated function with this type of camera
DAY : Full time color mode.
WHITE BAL : Adjusts white balancing options.
ATW : Automatically white balances the image.
PUSH : If you press the PUSH switch in the appropriate item position, Auto White Balance
will perform once.
MANUAL : Selects the MANUAL white balancing mode to manually adjust the scene to
your desired settings.
RED : Adjusts the red gain level. (0~ 20)
BLUE : Adjusts the blue gain level. (0~20)
MONITOR : Sets the video output to main input types.
GAMMA : Sets the desired Gamma value. (0.35/0.40/0.45/0.50/0.55/0.60/0.65/0.70)
CHROMA : Sets the color gain (0~20)
SHARPNESS : Sets the amount of sharpness applied on the image(0~20)
SHADING : Sets the Lens Shading Compensation value. (0~20)
PED. LV : Sets the Pedestal Level (0~20)
IMAGE : Adjusts various effect options.
BACKLIGHT : : Adjusts backlight options.
BLC : Produces a clearer image of an object darkened by strong backlighting.
HLC : Uses to contain extremely bright areas such as from car headlight,
the light can be masked out much of the on-screen details.
CONTRAST : Adjusts Contrast options.
D-WDR : Uses a digital wide dynamic range to balance dark and over
saturated areas within the image.
DEFOG : Activated this mode when the video or the weather is foggy.
It maintains a clear picture.
POSI/NEGA : Changes to Positive or Negative image.
H-MIRROR :Flips the image along the y-axis.
PRIVACY : Used to hide regions of the image.
ON : MASK LV : Selects the desired mask color
AREA NO.: Selects the current mask area from1 to 8 zones
DISPLAY: Selects ON/OFF to display of mask zone or not.
TOP/BOTTOM/LEFT/RIGHT : Adjusts the mask zone size for directions.
200 New Highway, Amityville, NY 11701
800-645-5516 / www.specotech.com
DNR : Reduces the background noise caused by the digital enhancement
of a low light environment. If AGC is turned OFF, the 2D-DNR will
be disabled. (LOW/MIDDLE/HIGH)
MOTION : Adjusts motion detection settings.
ON : SENSITIVITY : Sets the desired multiple of the digital exposure length.(0~20)
AREA NO : Selects the current motion zone from area1 to 4.
AREA USE : Adjusts the motion detection zone size.
TOP/BOTTOM/LEFT/RIGHT : Adjusts the mask zone size for directions
SYSTEM : Adjusts various System options.
CAM TITLE : Determines the camera name. (ON/OFF)
CAM ID : Sets the ID for the RS-485 (0~255)
ID DISP. : ON(Disables camera NO/ID)/OFF(Displays camera No/ID)
SYNC : Used Internal in DC12V and Line-lock in AC24V
BAUDRATE : : Sets the baud rate for the RS-485 (2400~115200)
COAXIAL : Deactivated function with this type of camera
LANGUAGE : Sets the desired OSD language. (ENGLISH/CHINESE)
SPECAIL : Adjusts special options.
DEFECT DET : Uses this mode when “White Spot(Dead Pixel)” on screen
is occurred.
FONT COLOR : Sets the camera OSD color(0~8)
EXIT
SAVE : Press to save the current settings and exit main menu.
RESTORE : Press to exit main menu without saving settings.
INITIAL : Resets all settings to it’s factory defaults.
SPECIFICATIONS
ITEM 960H 700TVL Camera Series
Lens
Power Source DC 12V
Image Sensor 1/3” COLOR 960H CCD
Total Pixels 1020(H) x 508(V) (NTSC)
Effective Pixels 976(H) x 494(V) (NTSC)
Scanning System 2 : 1 Interlace
Synchronization Internal
H. Resolution 700 TV Line
Min. Illumination 0.01Lux
S/N (Y signal) 50dB (AGC Off)
On Screen Display Built-in
AGC Level Adjustable
Shutter 1/60~1/120,000sec (NTSC)
DAY / NIGHT AUTO / NIGHT / DAY
Back Light Compensation BLC / HLC / D-WDR
White Balance ATW / PUSH / MANAUAL
DNR LOW / MIDDLE / HIGH
Motion Detection ON | OFF (4 Programmable Zone)
Privacy Masking ON | OFF (8 Programmable Zone)
Operational Temp. 14° F - 122° F
Storing Temp. -4° F - 140° F
Weight HT600H(5.5oz.), HT600VFH(6 oz.)
HT600VFH (2.8-12mm auto iris varifocal lens)
HT600H (2.9mm fixed lens)
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without
notice and without incurring any obligation. Rev.01/06/2014
Loading...