Speco HINT72HW, HINT71HG User Manual

Intensifier H® Outdoor Mini Turret Camera, Wall/Ceiling Mount

Synchronization

Internal

HINT71HG – Grey, 2.9mm / HINT71HW – White, 2.9mm HINT72HG – Grey, 3.6mm / HINT72HW – White, 3.6mm

DIMENSIONS

Front View

Unit : inch

SPECIFICATIONS

ITEMS Intensifier H® Outdoor Mini Turret

Lens

2.9mm (HINT71HG / HINT71HW)

3.6mm (HINT72HG / HINT72HW)

Image Sensor 1/3” SONY COLOR 960H CCD

Resolution 700TV lines

Total Pixels 1020(H) x 508(V) (NTSC)

Effective Pixels 976(H) x 494(V) (NTSC)

Scanning System 2 : 1 Interlace

Min. Illumination 0.01Lux at F1.2, 0.00001Lux (Sens-up x512)

S/N (Y signal) 50dB

Shutter 1/60~1/120,000sec (NTSC)

Power Consumption 150mA (DC)

Power Supply 12VDC

Operational Temp. -4°F - 140°F

Dimensions 1.58”(Dia.) x 1.49”(H) x 2.09”(L)

Weight 4oz.

OSD joystick built-in cable

RIGHTLEFT

DOWN

Main cable for Video / Power has built-in OSD joystick in order for users to adjust OSD Menu for their particular application

Side View

OSD MENU TREE

PRESET MODE

• OUTDOOR

• INDOOR

MAIN SETUP***

EXIT

• SAVE • RESTORE • INITIAL

MAIN SETUP***

EXPOSURE

• ELC

• INTENSIFY• AGC

DAY / NIGHT

WHITE BAL

• ATW • PUSH • MANUAL

MONITOR

• GAMMA • CHROMA • SHARPNESS • SHADING • PED.LV

IMAGE

• BACKLIGHT •CONTRAST • POSI/NEGA •H-MIRROR •PRIVACY

• BLC • HLC • WDR • DEFOG

SPECO DNR

• LOW / MIDDLE / HIGH / OFF

MOTION

SYSTEM

• CAM TITLE

• CAM ID

200 New Highway, Amityville, NY 11701

800-645-5516 / www.specotech.com

*Accessory *

3 mounting screw 1 wrench 1 Power lead

• LOW LIGHT • LOBBY • HALLWAY • ELEVATOR

• EXT.

• ID DISP

• SYNC

• AUTO • DAY • NIGHT

• LANGUAGE•SPECIAL

OSD MENU Details

PRESET : Used for quick and easy setup

for the installation environment.

MAIN SETUP : to adjust more detailed Function, press this button then you get More OSD tree as window as right side.

EXIT

- SAVE : Press to save the current settings and exit main menu.

- RESTORE : Press to exit main menu without saving settings.

- INITIAL : Resets all settings to it’s factory defaults.

EXPOSURE : Adjusts exposure settings.

ELC (Electronic Light Control) / ALC (not used for this camera)

LENS : Select the lens type (ALC/ELC) BRIGHTNESS : Adjusts image brightness. (0~ 20) SHUTTER : Auto / Manual Shutter can be selectable (1/60 ~ 1/120000) FLK(Flicker Less) : Select this when the picture flickers (ON/OFF) AGC: Adjusts the Automatic Gain Control level. (0~20) INTENSIFY : x2-x512 (increasing magnification may cause noise/distortion).

DAY / NIGHT : Adjust Day / Night options.

DAY : Full time color mode (This camera has this function as a factory default) NIGHT : Full time B/W mode. AUTO : Day / Night is switching automatically by AGC level. EXTERN & CDS : not use for this camera

Intensifier H® Outdoor Mini Turret Camera, Wall/Ceiling Mount

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

HINT71HG – Grey, 2.9mm / HINT71HW – White, 2.9mm HINT72HG – Grey, 3.6mm / HINT72HW – White, 3.6mm

WHITE BAL : Adjusts white balancing options.

ATW : Automatically white balances the image. PUSH : if you press it in appropriate item position, then Auto White Balance

will perform once.

MANUAL : manually adjust the scene to your desired settings.

RED : Adjusts the red gain level. (0~ 20) BLUE : Adjusts the blue gain level. (0~20)

MONITOR : Sets the video output to main input types.

GAMMA : Sets the desired Gamma value (0.35/0.40/0.45/0.50/0.55/0.60/0.65/0.70) CHROMA : Sets the color gain (0~20) SHARPNESS : Sets the amount of sharpness applied on the image(0~20) SHADING : Sets the Lens Shading Compensation value. (0~20) PED. LV : Sets the Pedestal Level (0~20)

IMAGE : Adjusts various effect options.

BACKLIGHT : : Adjusts backlight options.

BLC : Produces a clearer image of an object darkened by strong backlighting. HLC : Used to contain extremely bright areas such as car headlights,

the light can be masked out.

CONTRAST : Adjusts Contrast options.

WDR : Uses a digital wide dynamic range to balance dark and over

saturated areas within the image.

DEFOG : Activate this mode when the video or the weather is foggy.

It maintains a clear picture.

POSI/NEGA : Changes to Positive or Negative image.

* IMPORTANT SAFETY INSTRUCTIONS *

1) Read these instructions. 2) Keep these instructions.

3) Heed all warnings. 4) Follow all instructions.

5) Do not use this apparatus near water. 6) Clean only with a dry cloth.

7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.

amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use the attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

H-MIRROR :Flips the image along the y-axis.

PRIVACY : Used to hide regions of the image. MASK LV : Selects the desired mask color

AREA NO.: Selects the current mask area from 1 to 8 zones DISPLAY: Selects ON/OFF to display of mask zone or not. TOP/BOTTOM/LEFT/RIGHT : Adjusts the mask zone size for directions.

SPECO DNR : Reduces the background noise caused by the digital enhancement of a low light environment. If AGC is turned OFF, DNR will be disabled (LOW/MIDDLE/HIGH)

MOTION : Adjusts motion detection settings.

SENSITIVITY : Sets the desired multiple of the digital exposure length.(0~20) AREA NO : Selects the current motion zone from area1 to 4. AREA USE : Adjusts the motion detection zone size. TOP/BOTTOM/LEFT/RIGHT : Adjusts the mask zone size for directions

SYSTEM : Adjusts various System options.

CAM TITLE : Determines the camera name. (ON/OFF) CAM ID : Sets the ID for the RS-485 (0~255) ID DISP. : ON(Disables camera NO/ID)/OFF(Displays camera No/ID) LANGUAGE : Sets the desired OSD language. SPECIAL : Adjusts special options.

DEFECT DET : To remove “White Spot(Dead Pixel)” on screen FONT COLOR : Sets the camera OSD color(0~8)

200 New Highway, Amityville, NY 11701

800-645-5516 / www.specotech.com

* WARNING *

“To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.” “Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.”

Pour réduire le risque de feu ou de décharge électrique, n’exposez pas cet appareil à la pluie ou à l’humidité. L’appareil doit être gardé à l’abri des goutes ou des éclaboussures et aucun objet remplie d’un liquide, comme un vase, ne devrait être posé sur l’appareil.

In USA and Canada, Use a Class 2 power supply only

* CAUTION *

These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Ces instructions d'entretien sont pour l'utilisation par le personnel de service qualifié seulement. Afin d’éviter tout danger de décharge électrique, n’exécutez pas d’autre entretien que ceux indiqué dans le manuel d’instruction À moins que vous soyez qualifié pour le faire.

•FCC Information *

This equipment has been tested and found to comply with limits for a class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Speco Technologies is constantly developing product improvements. We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 082114