Speco HINT600VH, HINT600H User Manual
HINT600VH / HINT600H
2.5”
Intensifier H® Series Color Miniature Board Camera
DIMENSIONS
2.5”
1.1”
2.1”
3.5”
[HINT600VH]
1.4”
[HINT600H]
1.4”
200 New Highway, Amityville, NY 11701
800-645-5516 / www.specotech.com
*Accessory *
1 mounting screw
1.4”
1.6”
CONFIGURATION
[HINT600VH]
[HINT600H]
④④④④
③③③③
②②②②
①①①①
④④④④
③③③③
②②②②
①①①①
⑥⑥⑥⑥
2.1”
⑤⑤⑤⑤
⑤⑤⑤⑤
OSD MENU TREE
PRESET MODE
• OUTDOOR
• INDOOR
MAIN SETUP***
EXIT
• SAVE • RESTORE • INITIAL
MAIN SETUP***
EXPOSURE
• ALC
• INTENSIFY• AGC
DAY / NIGHT
WHITE BAL
• ATW • PUSH • MANUAL
MONITOR
• GAMMA • CHROMA • SHARPNESS • SHADING • PED.LV
IMAGE
• BACKLIGHT •CONTRAST • POSI/NEGA •H-MIRROR •PRIVACY
• BLC • HLC • WDR • DEFOG
SPECO DNR
• LOW / MIDDLE / HIGH / OFF
• LOW LIGHT • LOBBY • HALLWAY • ELEVATOR
• EXT.
• AUTO • DAY • NIGHT
①①①①
DC 12V /
⑤⑤⑤⑤
OSD Joy-Stick
②②②②
GND /
③③③③
VIDEO
⑥⑥⑥⑥
IRIS Jack for DC Lens
④④④④
N/C
MOTION
SYSTEM
• CAM TITLE
• CAM ID
• ID DISP
• SYNC
• LANGUAGE•SPECIAL
HINT600VH / HINT600H
H. Resolution
700 TV
Lines
ATW : Automatically white balances the image.
Intensifier H® Series Color Miniature Board Camera
OSD MENU Details
PRESET : Used for quick and easy setup
Of the installation environment.
MAIN SETUP : to adjust more detailed
functions, press this button to open up
the menu tree.
EXIT
- SAVE : Press to save the current
settings and exit main menu.
- RESTORE : Press to exit main menu
without saving settings.
- INITIAL : Resets all settings to its factory
defaults.
EXPOSURE : Adjusts exposure settings.
ALC (For HINT600VH) / ELC (for HINT600H)
LENS : Select the lens type (ALC/ELC)
BRIGHTNESS : Adjusts image brightness. (0~ 20)
SHUTTER : Auto / Manual Shutter can be selectable (1/60 ~ 1/120000)
FLK(Flicker Less) : Select this when the picture flickers (ON/OFF)
AGC: Adjusts the Automatic Gain Control level. (0~20)
INTENSIFY : x2-x512 (increasing magnification may cause noise/distortion).
DAY / NIGHT : Adjusts Day / Night options.
DAY : Full time color mode (This camera has this function as a factory default)
NIGHT : Full time B/W mode.
AUTO : Day / Night is switching automatically by AGC level.
EXTERN & CDS : not used for this camera
WHITE BAL : Adjusts white balancing options.
PUSH : if you press it in appropriate item position, then Auto White Balance
will perform once.
MANUAL : manually adjust the scene to desired settings.
RED : Adjusts the red gain level. (0~ 20)
BLUE : Adjusts the blue gain level. (0~20)
MONITOR : Sets the video output to main input types.
GAMMA : Sets the desired Gamma value (0.35/0.40/0.45/0.50/0.55/0.60/0.65/0.70)
CHROMA : Sets the color gain (0~20)
SHARPNESS : Sets the amount of sharpness applied on the image(0~20)
SHADING : Sets the Lens Shading Compensation value. (0~20)
PED. LV : Sets the Pedestal Level (0~20)
IMAGE : Adjusts various effect options.
BACKLIGHT : : Adjusts backlight options.
BLC : Produces a clearer image of an object darkened by strong backlighting.
HLC : Used to contain extremely bright areas such as car headlights,
the light can be masked out.
CONTRAST : Adjusts Contrast options.
WDR : Uses a digital wide dynamic range to balance dark and over
saturated areas within the image.
DEFOG : Activate this mode when the video or the weather is foggy.
It maintains a clear picture.
POSI/NEGA : Changes to Positive or Negative image.
SYSTEM : Adjusts various System options.
CAM TITLE : Determines the camera name. (ON/OFF)
CAM ID : Sets the ID for the RS-485 (0~255)
ID DISP. : ON(Disables camera NO/ID)/OFF(Displays camera No/ID)
LANGUAGE : Sets the desired OSD language.
SPECIAL : Adjusts special options.
SPECIFICATIONS
Lens
Power Source DC 12V (150mA)
Image Sensor 1/3” COLOR 960H CCD
Total Pixels 1020(H) x 508(V) (NTSC)
Effective Pixels 976(H) x 494(V) (NTSC)
Scanning System 2 : 1 Interlaced
Synchronization Internal
Min. Illumination 0.01Lux at F1.2, 0.00001Lux (Intensify 512x)
S/N (Y signal) 50dB (AGC Off)
On Screen Display Built-in
Intensify OFF / AUTO (x2 ~ x512)
DAY / NIGHT AUTO / DAY / NIGHT / EXT
Back Light Compensation BLC / HLC
Contrast D-WDR / DEFOG
White Balance ATW /PUSH/MANUAL
DNR LOW / MIDDLE / HIGH
Motion Detection ON/OFF (4 Programmable Zones)
Privacy Masking ON/OFF (8 Programmable Zones)
Operational Temp. 14°F - 122°F
Storage Temp. -4°F - 140°F
Weight HINT600H(5.5oz.), HINT600VH(6 oz.)
200 New Highway, Amityville, NY 11701
800-645-5516 / www.specotech.com
DEFECT DET : To remove “White Spot(Dead Pixel)” on screen
FONT COLOR : Sets the camera OSD color(0~8)
ITEM 960H 700TVL Miniature Board Camera
HINT600VH (2.8-12mm auto iris VF lens)
HINT600H (2.9mm fixed lens)
H-MIRROR :Flips the image along the y-axis.
PRIVACY : Used to hide regions of the image.
MASK LV : Selects the desired mask color
AREA NO.: Selects the current mask area from1 to 8 zones
DISPLAY: Selects ON/OFF to display of mask zone or not.
TOP/BOTTOM/LEFT/RIGHT : Adjusts the mask zone size for directions.
SPECO DNR : Reduces the background noise caused by the digital enhancement of a low
light environment. If AGC is turned OFF, DNR will be disabled.
(LOW/MIDDLE/HIGH)
MOTION : Adjusts motion detection settings.
SENSITIVITY : Sets the desired multiple of the digital exposure length.(0~20)
AREA NO : Selects the current motion zone from area1 to 4.
AREA USE : Adjusts the motion detection zone size.
TOP/BOTTOM/LEFT/RIGHT : Adjusts the mask zone size for directions
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without
notice and without incurring any obligation. Rev. 141218
Loading...