HDT471
HD-SDI 720/1080P Selectable
Traditional Camera with CS Mount
Dual Voltage (12VDC / 24VAC)
Please read this manual thoroughly before operation and keep
it handy for future reference.
WARNING & CAUTION
in
th e
lit e r a t ur e
ac c o m p an y i n g
th e
ap p l i an c e
__ _ _ _ __ _ _ _ __ _ _ _ __ _
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE T HE R IS K OF ELECTRIC SHOCK
D O N O T RE MO V E CO V E R ( O R B A CK ) .
N O U S E R S ER VI C E AB L E P A RT S I N S ID E
R E F E R S E R V I C I N G T O Q U A L I F I E D
S E RV IC E P E RS O NN EL . _ __ __ _ _ __ __ _ _ __
The lighting flash with an arrowhead symbol, within an equilateral triangle is
Intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons____________________________________
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (serving) instructions
I N F O R M AT IO N - T h i s eq u ip m e n t h a s b ee n t e s te d a n d f o u n d t o co m p l y wi t h
l i mi t s f or a c l a s s A d ig i ta l d e vi c e p u rs u a nt t o p ar t 1 5 o f t he F CC r u l e s.
T h e s e l i m i t s a r e d e s i g n ed to p ro vid e re a s on a b le p ro te ct i o n a g ai n s t h a r m f ul
i n t e r f e r e n c e w he n t h e e q u ip m e nt i s o p e r a t e d i n a c om me rc ia l e n v i r o n me n t .
Th i s e q u i p me n t g e n e r at e s , u s e s , a n d c a n r a d i a t e ra d i o f re q u e n c y e ne r g y a nd
if no t i n s t a lled a n d u s ed i n a c c orda n c e w ith the i n s t r u c t ion m a n u a l, ma y c a u s e
ha r mf u l in te r f e r e nce t o r a di o c o mmun i c a t ion s . O p e rati o n o f th i s e q ui p m e n t in a
r e s i d e n t i a l a r e a i s l i k e l y t o c a u s e h a r m f u l i n t e r f e r e n c e i n w h i c h
ca s e th e u s er w i l l b e req u i r ed t o c o r r e ct t h e i nte r f e re n c e at h i s o w n exp e n s e.
WARNING – Change or modification not expressly approved by the manufacturer could void
the user ’s author ity t o operate the equipment___ __________ ___ ___ ___ ____________
CAUTION : To prevent electric shock and risk of fire hazards:
DO NOT use power sources other than what is specified.______
This installation should be made by a qualified service person and should conform to all local codes.
2
PACKAGE CONTENTS & INSTALLATION
OSD
HD
-
SDI
OSD
HD
-
SDI
Please make sure that the following items are included
in the package:
1 Camera
1 Wrench
1 Video-Out Cable
1 Power Cable
Back Panel Configuration
Joystick
POWER
IN
CVBS OUT
VIDEO
OUT
3
FEATURES
4. PIP (Picture in Picture)
Zoom is activated, motion detected picture is shown in
1. MEGAPIXEL HIGH RESOLUTION
1/3” 2.1Megapixel Progressive CMOS sensor provides Full HD 1080p
video resolution.
2. SENS-UP
Digitally manipulates the exposure level of the image to produce bright
images in the darkest of scenarios.
3. DNR (Digital Noise Reduction)
High performance DSP Technology to reduce the gain noise in
digital image processing, producing clear sharp images in low light
conditions.
When D-
inset window.
5. DPC (Defect Pixel Correction)
Detection and correction of defective pixels in
a camera image sensor array.
6. TRUE DAY / NIGHT
Switches to appropriate mode (Color or B/W) mechanically.
7 . Miscellaneous
Various features including motion detection,
privacy masking, defog, BLC, etc.
4
LENS Mode
DC
●●●●
EXPOSURE
●●●●
●●●●
WHITE BAL.
●●●●
Indoor
●●●●
SHUTTER
ACCE
ATW
●●●●
OSD MENU TREE
Outdoor
●●●●
AGC
●●●●
DEFOG
●●●●
AWC->SET
●●●●
SENS-UP
●●●●
BACKLIGHT
●●●●
INDOOR
●●●●
BRIGHTNESS
●●●●
RETURN
●●●●
OUTDOOR
MANUAL
●●●●
DAY & NIGHT
AUTO
●●●●
NR
2DNR
●●●●
RETURN
●●●●
SPECIAL
CAM TITLE
●●●●
LANGUAGE
●●●●
RETURN
●●●●
ADJUST
SHARPNESS
●●●●
720 / 1080
●●●●
●●●●
●●●●
COLOR
3DNR
●●●● ●●●●
●●●●
●●●●
RETURN
●●●●
●●●●
BW
●●●●
LEVEL (3D DNR)
D-EFFECT
DEFECT
MONITOR
●●●●
EXT
●●●●
●●●●
●●●●
OSD
SMART NR
●●●●
MOTION
RS-485
LSC
●●●●
PRIVACY
●●●●
VERSION
●●●●
NTSC/PAL
●●●●
RESET
FACTORY
●●●●
EXIT
RETURN
●●●●
5
OSD MENU DETAILS
-
Set AGC Mode to High to increase the Gain.
1) LENS <DC / Manual>
2) EXPOSURE
<SHUTTER / AGC / SENS-UP / BRIGHTNESS /ACCE/ DEFOG /
BACKLIGHT / RETURN>
SHUTTER : Adjust shutter settings : Auto / A. FLK / Manual
- A. FLK mode reduces on-screen flickering.
- Electronic Shutter Control (AUTO) adjusts brightness level on
screen.
- Manual mode allows you to adjust the shutter speed from
1/30 ~1/50,000 and also x2 ~ x30.
AGC (Auto Gain Control) : High / Middle / Low
- Controls Gain Noise to improve image quality.
SENS-UP : Off / Auto(x2 ~ x30)
- Automatically detects ambient light level and maintains a clear
picture in low light conditions.
BRIGHTNESS : Adjust Brightness of the lens (1~100 Steps)
ACCE : Off / Low / Middle / High
- Adaptive color contrast enhancement
DEFOG : Off / Low / Middle / High
- Turn Defog ON to compensate for external conditions.
BACKLIGHT : Off / BLC / HSBLC
- BLC : Will compensate for extremely bright background conditions.
- HSBLC : To mask a strong light at a designated area.
Return
6
OSD MENU DETAILS
To find the optimal setting for current luminance environment in this
you to increase or decrease the red or blue factor.
3) WHITE BAL.
<ATW / AWC-SET / INDOOR / OUTDOOR / MANUAL>
ATW : Auto Tracking White Balance.
- Use this mode when the color temp. is between 1,800~10,000K
AWC->SET :
-
mode. To manually set, point the camera towards a sheet of white paper
and use the Joystick.
INDOOR : Loads indoor camera settings.
OUTDOOR : Loads outdoor camera settings.
MANUAL
- To fine-tune White Balance manually. Set White balance first by using
ATW or AWC mode before Manual mode. After that , if there is still a white
balance issue, switch to manual mode to fine-tune. Manual mode allows
4) DAY / NIGHT <AUTO / COLOR / BW / EXT>
AUTO : Automatic D/N switching according to ambient illumination.
Delay / D-N / N-D / Return Modes are provided.
COLOR : Sets the camera to display color video
B/W : Sets the camera to display B/W video
EXT : Auto D/N switching by using external signals (IR version only).
5) NR <2DNR / 3DNR / LEVEL / SMART NR>
- To reduce the background noise in a low luminance environment with
2D + 3D filtering system.
2DNR : Reduce Noise Level in static objects.
3DNR : Reduce Noise Level in non-static objects.
LEVEL : Control 3D DNR Level.
Smart NR : Reduce “Ghost Effect” caused by moving objects.
7
OSD MENU DETAILS
6-6) LANGUAGE :
6) SPECIAL
6-1) CAM TITLE : To program and display a camera title on the monitor.
6-2) D-EFFECT :
<Freeze / Mirror / D-Zoom / Neg.Image / Return>
- Freeze : Freezes the display image.
- Mirror : Changes the video image via a vertical flip or mirror.
- D-Zoom : Digital Zoom In / Out up to 64x.
PIP : When D-Zoom is activated, the original picture will be
shown in inset window.
PAN/TILT : Desired Pan /Tilt location of the PIP window
- Neg.Image : Image reversal ON/OFF
6-3) MOTION :
- A signal is generated by the camera whenever motion is
detected. You can define 3 areas and control its sensitivity.
6-4) PRIVACY :
To disable video in a selected area. 8 areas selectable.
< ENG/ JPN/ CHN1/ CHN2>
6-7) DEFECT :
Activate this setting when “White Spots or Dead Pixels” are detected.
- Live DPC : It corrects “Dead Pixel” while the camera is activated.
- Level : Set the desired level of Live DPC
- Static DPC : It corrects “ Dead Pixel” when the camera is using Sens-Up.
- Sens-Up : Set the designated Sens-Up value for Static DPC.
6-6) RS-485 : Pelco D is supported. (Optional)
7) ADJUST
7-1) SHARPNESS : Level / Resolution / Return
* Activate “Resolution” mode to get better resolution.
7-2) MONITOR : CRT / LCD modes are provided.
7-3) OSD : Change OSD Text colors.
7-4) LSC : Lens Shading Correction.
7-5) NTSC / PAL : Select your TV system.
7-6) 720 / 1080 : Select your desired video size and resolution.
7-7) Return
8) RESET
8
SPECIFICATIONS
Item HDT471
Image Sensor 1/3” Progressive CMOS Sensor
Total Pixels 2010(H) x 1180(V) Approx. 2.22Megapixels
Effective Pixels 1944(H) x 1092(V) Approx. 2.12Megapixels
Video Output 1920(H) X 1080(V) 30P, 1280(H) X 720(V) 60P
Video Output Format
Min. Illumination
S/N (Y signal) 52dB (AGC Off)
AGC LOW / MIDDLE / HIGH SELECTABLE
SHUTTER OFF / A.FLK / 1/30~1/50000 / X30 ~ X2 / AUTO
SENS-UP OFF / AUTO (X2~X30)
ACCE OFF / LOW / MIDDLE / HIGHT SELECTABLE
WHITE BALANCE ATW / AWC-SET / INDOOR / OUTDOOR / MANUAL
DAY / NIGHT AUTO / COLOR / BW / EXT SELECTABLE
NR(NOISE REDUTION) 2DNR / 3DNR / SMART NR SELECTABLE
MOTION DET.
PRIVACY MASKING
HD-SDI Output (1.5G/s, SMPTE 292M),
Analog second video output, CVBS out simultaneously
0.1Lux (F.1.2, 50IRE, AGC Max.)
0.01Lux (Sens-Up : Auto:x30)
ON | OFF (3 Programmable Zone)
ON | OFF (8 Programmable Zone)
LENS SHADING
CORRECT.
Power Source 12VDC & 24VAC ( Dual Voltage )
Power Consumption 250mA (DC) / 240mA (AC)
Synchronization Internal
Lens Type Optional CS Mount Lens
Operational Temperature 14℉℉℉℉ ~122℉℉℉℉
Operational Humidity 30% ~90% RH
Dimension 2.48(W)x 2.04(H)x5.03(L)
Weight 1.1Ibs
ON / OFF SELECTABLE
9
DIMENSIONS
* TOP VIEW
Unit : mm
* SIDE VIEW
10
WARRANTY
11
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice
and without incurring any obligation.
200 New Highway
Amityville, NY 11701
631-957-8700
www.specotech.com
Rev. 130206
Loading...