HD1B316
High Definition Weatherproof Bullet Camera
200 New Highway, Amityville, NY 11701
800-645-5516 / www.specotech.com
1. Package Contents
1  HD1B316 camera 
4  Mounting Screws 
1  Wrench
2. Features
4. OSD Menu
3. Controller
①
②
③
Main Menu
Lens            ▷
Shutter          ▷
BLC            ON
AGC MID
White Balance    ▷
Adjust          ▷
Reset           ▷
Return
* 1/3” Sony 720P HD CMOS Sensor (Megapixel Resolution) 
* 3.5~16mm Auto Iris Lens 
* HDcctv 720p30 Video Output (1.5Gb/S Digital over coax) 
* Video Output for Test Monitor 
* True Mechanical Day / Night (ICR) 
* Min. Illumination – Color : 0.2Lux, F1.2 / B/W : 0.01Lux, F.1.2 
* External Controls for Zoom and Focus 
* Easy mount system simplifies installation 
* Weatherproof Operation (IP-67 Rated) 
* Indoor / Outdoor : meets all your surveillance needs 
* Install using RG 59cable & BNC connectors 
* 5 year warranty
* Lens  
-DC : DC Lens Type Setting  
IRIS ADJ [ Value] : IRIS Open Level Control 
- Return : Function Back
*Shutter 
-Flicker : This function triggers the screen in the 50Hz power range, preventing the 
screen flicker that can result from the dissonance of vertical 
synchronization frequency and blink frequency. 
- Auto : Only Operate when Manuals Lens is active
- Manual : 1/30, 1/60, 1/600, 1/1200, 1/6000, 1/12000
- Return : Function Back
* BLC
- Provides light level control to overcome severe back light condition 
* AGC 
- OFF / LOW / MID / HIGH 
* White Balance
- AWB : Auto White Balance Mode Setting
- Fixed[Value] : 2300,3100,5000,6800
- Manual : White Balance Mode Manual Setting
R-Gain [Value] : R-Gain Value Control 
B-Gain [Value] : B-Gain Value Control
-Return : Function Back
* Adjust
- Sharpness [Value] : Sharpness Control
- Brightness : Adjust a brightness setting of monitoring status
- Contrast : Adjust a contrast of monitoring status 
- Day / Night : [Auto] 
[Color] 
[B/W] 
- Return : Function Back
* Reset
- Would you like to reset? Yes or No
4. OSD Menu Details
① Switch for Selection of Video out / SDI out 
② Video output for Test Monitor 
③ OSD Button (UP/DOWN/LEFT/RIGHT/SET)