Speco EPCOAX Specsheet
Ethernet and Power Over Coax
Adaptor Kit
EPCOAX One transmitter unit (IPC)
One receiver unit (SV)
Power supply
Features
• Use Coaxial cable to transmit power and Ethernet data.
• Maximum transmission distance up to 3200’ (2km).
• Network delay less than 1ms
• Loop circuit mode feature means that if there is a breakdown in the
1” (H)
circuit, system can still function normally
• Meets MIT rack installation standard
• Supports resolutions up to 1080p
• Optional rack mount available to mount up to 16 units together on
a rack: EPRACK
Specications
Maximum Transmission Distance .....Up to 3200’ (2km) via RG59 cable;
Transmission distance decreases with higher resolutions and smaller gauge wire.
LED Status Indicators .......................Power (Red)
PoE/Data Ethernet (Green)
Network Ethernet (Green to indicate connection, yellow to indicate activity)
Protection ..........................................ESD (Contact and Air Discharge Level 3)
Operating Temperature ..................... 32° F – 131° F
Storage Temperature ........................-40° F – 185° F
Operating Humidity ...........................0% – 95% RH
Dimensions .......................................4” (W) x 1” (H) x 3.25” (L)
Weight ...............................................6.4 oz. each (transmitter and receiver)
4” (W)
1 2
EPOC
1 2
EPOC
Power
Ethernet
Power
Ethernet
48-57VDC
12VDC
Speco Technologies is constantly developing and improving products.
We reserve the right to modify product design and specications without notice
and without incurring any obligation. Spec Rev. 2/6/15
800-645-5516 • Fax: 631-957-9142 or 631-957-3880 • specotech.com
Optional Accessory
EPRACK
Rack Mount
Loading...