Speco DVR-4TN, DVR-8TN, DVR-16TN, DVR-16TT, DVR-16TS User Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
®
www.specotech.com
DVR-4TN
DVR-8TN
DVR-16TN
DVR-16TS
DVR-16TT
Triplex+ Digital Video Recorder Family
With Network/DDNS Video Server
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
1
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
2
Caution and Preventive Tips
• Take care not to drop the unit or subject the unit to major shocks or jolts.
• Do not place this unit on an unstable stand, bracket or mount.
• This unit is designed for indoor use only. Do not place the unit near water or in other
extremely humid conditions.
• This unit should not be placed in a built-in installation unless proper ventilation is provided.
• Please check the type of power source available before you plug and operate the unit.
• If the clearing is necessary, note to plug the unit from the outlet before uncovering the top
cover. Do not use liquid cleaners or aerosol cleaners. Use only a damp cloth for cleaning.
• Always power down the system prior to connecting and disconnecting accessories, with
the exception of USB devices.
• Lithium battery: Danger of explosion if battery is incorrectly replaced. Replace with
the same type of battery or equivalent type recommended by the battery manufacturer.
Dispose of used batteries according to the battery manufacturer’s instructions.
This symbol intends to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the
appliance.
This symbol intends to alert the user to the presence of unprotected “Dangerous
Voltage” within the product’s enclosure that may be strong enough to cause a
risk of electric shock.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
3
Important Information
Before proceeding, please read and observe all instructions and warnings in this
manual. Retain this manual with the original bill of sale for future reference and, if necessary,
warranty service. When unpacking your unit, check for missing or damaged items. If any item is
missing, or if damage is evident, DO NOT INSTALL OR OPERATE THIS PRODUCT. Contact your
dealer for assistance.
Rack Mounting
Consult with the supplier or manufacturer of your equipment rack for the proper procedure
and hardware for mounting this product in a safe fashion. Avoid uneven loading or
mechanical instability when rack-mounting units. Make sure the units are installed to get
enough airflow for safe operation. The maximum temperature for rack-mounted units is 104
°F/40 °C. Check product label for power supply requirements to assure that no overloading
of supply circuits or over current protection occurs. Main grounding must be reliable and
uncompromised by any connections.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
4
Table of Contents
1. Overview .....................................................................................................................11
1.1 Product Key Features ........................................................................................12
1.2 Product Application Diagram..............................................................................13
2. System Setup..............................................................................................................13
2.1 Position the Unit.................................................................................................14
2.2 Selecting Video Format......................................................................................14
2.3 Connecting Devices to the Unit..........................................................................14
2.4 Rear Panel Connections....................................................................................15
3. General System Setup ...............................................................................................18
3.1 Front Panel Introduction ....................................................................................19
3.1.1 LED Definition.........................................................................................19
3.1.2 Functional Keys ......................................................................................20
3.2 Configuring the HDD in the unit .........................................................................23
3.3 Power Up/ Down the Unit ..................................................................................24
3.4 Entering OSD Setup Menu ................................................................................25
3.5 System Date/ Time Setting ................................................................................26
3.5.1 Set Date/ Time ........................................................................................26
3.5.2 Daylight Saving Time Setup ..................................................................27
3.6 Network Time Protocol Setup ............................................................................28
3.7 Record Schedule/ Quality Setting......................................................................29
3.6.1 Record Mode ..........................................................................................29
3.6.2 Schedule Setup.......................................................................................30
Day/ Night Time Start..............................................................................30
Day/ Night Time End...............................................................................30
Weekend Schedule.................................................................................30
Weekend Start/ End ................................................................................31
3.6.3 Preset Record Configuration...................................................................31
3.6.4 Per Camera Configuration ......................................................................32
3.6.5 To Record Event Video Only ...................................................................32
4. Basic Operation..........................................................................................................33
4.1 Viewing Live/ Playback Video............................................................................33
4.1.1 Viewing Modes........................................................................................33
4.1.2 Digital Zoom............................................................................................34
4.1.3 Viewing Live Cameras ............................................................................34
To Freeze Live Image..............................................................................34
4.1.4 Viewing Recorded Video.........................................................................34
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
5
Key Usage in Playback ...........................................................................35
Pause Playback and Single Step Forward..............................................35
Viewing Live Image in Playback Mode....................................................36
4.1.5 Dual Main Output (For DVR-16TT Only) .................................................36
4.2 Sequence Setup ................................................................................................37
4.2.1 Sequence on Main Monitor .....................................................................37
4.2.2 Call Monitor Control ................................................................................37
4.3 Searching Recorded Video................................................................................38
4.3.1 Searching by Time ..................................................................................38
4.3.2 Searching by Event.................................................................................39
4.4 Video Export ......................................................................................................40
4.4.1 Export from OSD Setup Menu ................................................................40
4.4.1.1 Select the External Device......................................................40
4.4.1.2 Select Video for Exporting.......................................................41
4.4.1.3 Digital Signature......................................................................42
4.4.1.4 Erase Disc...............................................................................42
4.4.2 Quick Video Export through Front Panel.................................................42
4.4.2.1 ezBurn Introduction.................................................................43
4.4.2.2 To Export Normal Video ..........................................................44
4.4.2.3 To Export Event Video.............................................................44
4.5 Deleting Recorded Video...................................................................................45
4.6 Dome Control.....................................................................................................46
4.6.1 Dome Connection ...................................................................................46
4.6.2 Dome Protocol Setup..............................................................................46
4.6.3 RS485 Setup...........................................................................................47
4.6.4 Dome Controlling Key .............................................................................48
4.6.5 Setting Preset Points...............................................................................49
4.6.6 Calling Preset Points...............................................................................50
5. Advanced System Configuration ..............................................................................51
Key Usage in OSD Menu............................................................................................51
Key Usage in Virtual Keyboard...................................................................................52
5.1 System Setup ....................................................................................................53
5.1.1 Version ....................................................................................................53
5.1.1.1 Model Name & Version ...........................................................53
5.1.1.2 Software Upgrade via Local Device ........................................54
5.1.1.3 Software Upgrade via Internet ................................................54
5.1.2 Language................................................................................................55
5.1.3 Date / Time..............................................................................................55
5.1.3.1 Date / Time Setting(s) .............................................................55
5.1.3.2 Time Zone...............................................................................56
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
6
5.1.3.3 Date / Time Display.................................................................56
5.1.3.4 Date Display Mode..................................................................56
5.1.3.5 Time Display Mode .................................................................57
5.1.3.6 Date/Time Order .....................................................................57
5.1.3.7 Daylight Saving Time Setup ....................................................57
Daylight Saving Time ..............................................................57
DST Start / End .......................................................................57
DST Bias.................................................................................57
5.1.3.8 Network Time Protocol Setup..................................................57
NTP Server .............................................................................58
Automatically Time Sync.........................................................58
Manually Time Sync................................................................58
5.1.4 Unit Name...............................................................................................58
5.1.5 Password ................................................................................................59
5.1.5.1 Admin / User Password(s) ......................................................59
5.1.5.2 Enable Password ....................................................................59
5.1.5.3 Load Factory Password ..........................................................60
5.1.6 Network Setup ........................................................................................60
5.1.6.1 LAN Select ..............................................................................61
5.1.6.2 LAN Setup...............................................................................61
DHCP......................................................................................61
IP ............................................................................................62
Netmask..................................................................................62
Gateway..................................................................................62
DNS ........................................................................................62
PPPoE Account.......................................................................63
PPPoE Password....................................................................63
PPPoE Max Idle......................................................................64
Router Setting .........................................................................64
Connect At Booting .................................................................65
Network Restart ......................................................................65
5.1.6.3 Dial-in Setup ...........................................................................67
Dial-in Service.........................................................................68
Dial-in Account ........................................................................68
Dial-in Password .....................................................................69
Server IP.................................................................................69
Client IP ..................................................................................69
Dial-in Idle Time ......................................................................70
Dial-in Max Time .....................................................................70
5.1.6.4 Dial-out Setup .........................................................................70
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
7
Dial-out DHCP ........................................................................71
Dial-out DHCP ........................................................................71
Dial-out IP ...............................................................................71
Dial-out Netmask ....................................................................71
Dial-out Gateway ....................................................................71
Dial-out DNS ...........................................................................71
Phone Number........................................................................72
Dial-out Account......................................................................72
Dial-out Password...................................................................73
Dial-out Idle Time....................................................................73
Dial-out Max Time...................................................................73
Connect ..................................................................................73
5.1.6.5 Trigger Port .............................................................................73
5.1.6.6 Email Address .........................................................................74
5.1.6.7 SMTP Setup............................................................................74
Email via SMTP ......................................................................74
SMTP Server ..........................................................................75
SMTP Port ..............................................................................75
SMTP Account ........................................................................75
SMTP Password .....................................................................76
5.1.6.8 DDNS Setup ...........................................................................76
Enable DDNS..........................................................................76
Host Name..............................................................................77
DDNS Port ..............................................................................77
Submit/ Update .......................................................................77
ezDDNS..................................................................................78
5.1.7 RS485 Setup...........................................................................................78
5.1.7.1 Unit ID.....................................................................................78
5.1.7.2
Baud Rate...............................................................................78
5.1.7.3 Bits..........................................................................................78
5.1.7.4 Stop.........................................................................................79
5.1.7.5 Parity.......................................................................................79
5.1.8 Audio Output...........................................................................................79
5.1.9 Key Beep ................................................................................................79
5.2 Monitor Setup ....................................................................................................80
5.2.1 Show Camera Title..................................................................................80
5.2.2 Title Position............................................................................................80
5.2.3 Monitor Brightness ..................................................................................81
5.2.4 Monitor Contrast .....................................................................................81
5.2.5 Monitor Chrominance..............................................................................81
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
8
5.2.6 Screen Center Adjust ..............................................................................81
5.2.7 Show Color Bar.......................................................................................82
5.2.8 VGA Resolution.......................................................................................82
5.3 Camera Setup....................................................................................................82
5.3.1 Camera Select ........................................................................................83
5.3.2 Dome Protocol ........................................................................................83
5.3.3 Dome ID..................................................................................................83
5.3.4 Camera Title............................................................................................83
5.3.5 Covert .....................................................................................................84
5.3.6 Termination .............................................................................................84
5.3.7 Brightness...............................................................................................84
5.3.8 Contrast ..................................................................................................85
5.3.9 Saturation................................................................................................85
5.3.10 Hue.......................................................................................................85
5.3.11 Audio Association....................................................................................85
5.4 Record Setup.....................................................................................................85
5.4.1 Record Mode ..........................................................................................86
5.4.2 Schedule Setup.......................................................................................87
5.4.2.1 Day / Night Time Start / End....................................................87
5.4.2.2 Weekend Schedule.................................................................87
5.4.2.3 Weekend Start / End ...............................................................87
5.4.3 Preset Record Configuration...................................................................88
5.4.4 Per Camera Configuration ......................................................................88
5.4.4.1 Camera Select ........................................................................88
5.4.4.2 Normal PPS ............................................................................89
5.4.4.3 Normal Qlty.............................................................................89
5.4.4.4 Event Max PPS.......................................................................89
5.4.4.5 Event Qlty ...............................................................................89
5.4.4.6 Event Active ............................................................................89
5.4.5 ezRecord Setup ......................................................................................89
5.4.6 Data Lifetime...........................................................................................91
5.4.7 Pre-Alarm Recording ..............................................................................91
5.4.8 Circular Recording ..................................................................................91
5.4.9 Audio Recording .....................................................................................92
5.4.10 Purge Data ...........................................................................................92
5.4.10.1 Purge All Data .........................................................................92
5.4.10.2 Purge All Event Data ...............................................................92
5.4.10.3 Purge Event Before.................................................................92
5.4.10.4 Start to Purge..........................................................................92
5.5 Sequence Setup ................................................................................................93
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
9
5.5.1 Main / Call Monitor Dwell ........................................................................93
5.5.2 Main / Call Monitor Schedule ..................................................................93
5.6 Event Setup .......................................................................................................94
5.6.1 Internal Buzzer........................................................................................94
5.6.2 Event Icon...............................................................................................94
5.6.3 Email Notice............................................................................................95
5.6.4 Email Attachment ....................................................................................95
5.6.5 Event Full Screen....................................................................................95
5.6.6 Event Duration ........................................................................................95
5.6.7 Per Channel Config.................................................................................96
5.6.7.1 Channel Select........................................................................96
5.6.7.2 Video Loss Detect...................................................................96
5.6.7.3 Motion Detect..........................................................................96
5.6.7.4 Detection Config .....................................................................97
Detected Area Setup ...............................................................97
Sensitivity................................................................................97
Area Threshold .......................................................................98
Detected Area Percentage ......................................................98
5.6.7.5 Alarm In ..................................................................................98
5.6.7.6 Alarm Out................................................................................98
5.6.7.7 Digital Deterrent ......................................................................98
5.7 Database Setup ...............................................................................................100
5.7.1 Total / Free Size of HDD .......................................................................100
5.7.2 Avail. REC Time ....................................................................................101
5.7.3 Internal / External Disks ........................................................................101
5.8 Configuration ...................................................................................................102
5.8.1 Load Factory Default.............................................................................102
5.8.2 Import Configuration .............................................................................102
5.8.3 Export Configuration .............................................................................103
5.8.3.1 Copy Destination...................................................................103
5.8.3.2 Configuration Name ..............................................................103
5.8.3.3 Begin Export .........................................................................103
5.9 Video Export ....................................................................................................104
5.9.1 Select Device........................................................................................104
5.9.2 Select Channel......................................................................................105
5.9.3 From / To Time ......................................................................................105
5.9.4 Select Events........................................................................................106
5.9.5 Data Type..............................................................................................106
5.9.6 Digital Signature....................................................................................106
5.9.7 Erase Disc.............................................................................................107
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
10
5.9.8 Begin Export .........................................................................................107
5.10 Text Setup........................................................................................................107
5.10.1 Text Function.......................................................................................107
5.10.2 Text Overlay ........................................................................................108
5.10.3 Exception Text Setup...........................................................................108
5.10.3.1 Exception No.........................................................................108
5.10.3.2 Trigger...................................................................................108
5.10.3.3 Exception String....................................................................108
5.10.3.4 By Numerals .........................................................................108
5.10.4 Input Setup..........................................................................................109
5.10.4.1 Port Selection........................................................................ 110
5.10.4.2 Input source .......................................................................... 110
5.10.4.3 Camera Selection .................................................................110
5.10.4.4 Text Filter ..............................................................................110
5.10.4.5 Manual Filter Setup............................................................... 111
5.10.4.6 Input Process........................................................................ 111
5.10.4.7 Text Baud Rate ..................................................................... 111
5.10.4.8 Text Bit .................................................................................. 111
5.10.4.9 Text Stop ............................................................................... 111
5.10.4.10 Text Parity ............................................................................. 111
5.11 Shutdown......................................................................................................... 112
Appendix A: Technical Specifications .........................................................................113
Appendix B: Record Configuration..............................................................................115
Appendix C: Record Duration.......................................................................................119
Appendix D: Dial-up Connections via Modem ............................................................122
Establishing Dial-in Connection ................................................................................122
Establishing Dial-out Connection..............................................................................126
Appendix E: Verifying Digital Signature ......................................................................132
Appendix F: Alarm I/O Pin Definition...........................................................................135
Appendix G: HDD PC Player Tool Introduction...........................................................137
Using EXT2IFS on Your PC......................................................................................137
Start Playing the *.drv file..........................................................................................139
Appendix H: IR Remote.................................................................................................141
Appendix I: ezRecord Diagram Sample.......................................................................143
Appendix J: Connect to External Storage Device.......................................................146
Appendix K: Recording in MPEG-4/ MJPEG Format...................................................147
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
11
1. Overview
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit is an integrated digital
video recorder that combines the features of a time-lapse audio/ video
recorder, a multiplexer, and a video server to create a single security CCTV
solution.
Its outstanding triplex+ operation enables users to view live or playback
recorded video, have remote access through network simultaneously while
recording other video, and to view previously recorded video instantly by
entering the time and date or selecting recorded video from the event list.
The total number of PPS (Pictures per Second) makes the main difference
among these models, shown as below table:
DVR-4TN/ 8TN/ 16TN DVR-16TS DVR-16TT
NTSC
120 pps 240 pps 480 pps
PAL
100 pps 200 pps 400 pps
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series includes SpecoRemote™, the
remote viewing and configuration software that is a Web-browser plug-in,
which allows the user to view live, or recorded video images, and enables
remote configuration. The remote software is stored in the DVR-4TN/ 8TN/
16TN/ 16TS/ 16TT series unit and deployed over a LAN, WAN or Internet
connection to remote Windows-based computers. This simplifies the
installation and maintenance of the software components so all remote users
are kept up to date.
DVR-4TN
DVR-8TN
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
12
DVR-16TN/ 16TS/ 16TT
1.1 Product Key Features
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series offers advanced features not
typically found in standard multiplexers; it integrates the full features of a DVR,
multiplexer and video server (by using the software SpecoRemote™). The
key features of the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series are listed as
follows.
• MPEG-4 high quality compression and MJPEG
• 4/8/16 channels for video input
• Triplex+ operation enabling simultaneous viewing live or playback while
continuing to record
• SpecoRemote™ web-based software for remote monitoring and control
via LAN or Internet including CMS
• Embedded Linux operating system
• Real-time “live display” for each channel
• Recording frame rate up to 480 pps(NTSC)/ 400 pps(PAL)
• 2 Channels of audio recording/ playback
• 4 USB2.0 ports for video clip export and/or backup
• Easy software upgrade via USB ThumbDrive
®
, CD/RW or Internet Remote
Application
• Up to 4 internal hard drives support up to 3TB capacity
• POS Support
• IEEE 1394 for external storage and NAS for TS/TT
• 2X Digital Zoom available in LIVE mode
• Automatic camera detection (Plug & Play)
• Covert camera operation provides enhanced security and administrator
control
• Per camera configuration for camera settings, frame rate, picture bit rate,
alarms, motion detection.
• Programmable day/ night/ weekend scheduling
• Programmable main monitor/ call-monitor switching sequence
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
13
• Powerful alarm processor allows flexible alarm trigger and responses,
including alarm, motion, and camera failure
• Dome control protocols: Speco, Pelco D, Pelco P, Fastrax 2 and AD422
• Two levels of password security
1.2 Product Application Diagram
Connect the unit with other devices as shown in the system diagram below to
complete a video surveillance solution. The figure also displays the
expandability and flexibility of this digital recording system.
2. System Setup
Priority notices and an introduction on system installation will be described in
this chapter. Please follow the instructions to operate the unit.
In order to prevent the unit from data loss and system damage that can be
caused by a sudden power fluctuation, use of an Uninterruptible Power
Supply (UPS) is highly recommended.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
14
2.1 Position the Unit
Position/ mount the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit in an
appropriate, steady location and make sure the power is off before making
any connections. The area should avoid hindering or blocking the unit from
airflow. Enough airflow is needed to protect the unit from overheating.
The maximum allowable temperature of operating environment is 104°F/
40°C.
The unit utilizes heat-conducting techniques to transfer internal heat to the
case, especially to the bottom side of the unit.
NOTE: Be sure not to remove the rubber feet, and always leave a
space for air ventilation on the unit’s bottom side.
2.2 Selecting Video Format
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit is designed to operate
under either NTSC or PAL video formats. Please contact a qualified service
person to perform the installation procedure.
2.3 Connecting Devices to the Unit
This section lists some important notices that should be read before
making any connections to the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series
unit.
NOTE: Connect short-term external devices, such as USB
ThumbDrive
®
, USB CD-RW, USB Hard Disk Drive, etc., only after the
unit is successfully powered up.
Connecting Required Devices
Before powering up, you should connect cameras and a main monitor to the
unit for basic operation. If needed, connect a call monitor for displaying full
screen video of all installed cameras in sequence.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
15
Connecting Short-term Device
If you plan to install any short-term external devices, such as USB CD-RW,
USB Hard Disk Drive, etc, to the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series
and want to use them as part of the unit system, make sure those devices
are connected only after the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT is
powered up. The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit can only
recognize the external devices after the power-up process is completed.
2.4 Rear Panel Connections
There are several connectors on the rear panel of the DVR-4TN/ 8TN/ 16TN/
16TS/ 16TT series unit available for installations. The following figure shows
the connectors by name and a detailed description of each connector follows.
There is one difference between the rear panels of different models;
DVR-4TN/ 8TN/ 16TN has two IEEE 1394 connectors and DVR-16TS/ TT has
one 1000M LAN Port instead, shown as below figures.
Rear Panel of DVR-4TN/ 8TN/ 16TN:
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
16
Rear panel of DVR-16TS/ 16-TT:
Main Monitor (S-Video/ BNC/ VGA)
S-Video, BNC and VGA output connectors are available for connecting to a
main monitor. The main monitor displays live image and playback recorded
video in full-screen or multiple window format.
Call Monitor (BNC)
The call monitor is used to display full screen video of all installed cameras in
sequence. The BNC call monitor connector allows the user to connect an
optional call monitor to the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit.
Reference to dual monitor support on TS/TT (refer to section 4.1.5)
Video Input
A group of BNC connectors is available for video input streams from installed
cameras. The number of connectors is equal to the number of channels; the
DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit has 4/ 8/ 16 BNC connectors
on the rear panel, respectively.
Video Looping
The other group of BNC connectors positioned on the rear panel is for looping
out video input.
RS-232C
The unit provides a RS-232C communication port for sending and receiving
signals.
Alarm I/O & RS485 Port
The unit provides an Alarm I/O and RS485 port that offers user the flexibility
required to connect the unit to other devices.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
17
Refer to Appendix F: Alarm I/O Pin Definition for detailed pin information on
the Alarm I/O for the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT.
IEEE1394 (for DVR-4TN/ 8TN/ 16TN only)
DVR-4TN/ 8TN/ 16TN series unit is equipped with two IEEE1394 (FireWire®)
ports for extended connections.
LAN 1000M (for DVR-16TS/ 16-TT only)
This port is for DVR-16TS/ 16-TT to connect to a NAS device.
Audio In/ Out
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit provides two channels of
audio recording and playback. The Audio In RCA connector is offered for
connecting an audio source device (e.g. external amplified microphone) to the
unit. The Audio Out RCA connector is available for connecting an audio output
device (e.g. amplified speakers) to the unit.
USB 2.0 (x4)
There are two USB2.0 ports in the rear panel and two in the front panel to
allow users to connect external USB devices to the unit, such as a
ThumbDrive®.
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit allows the user to preset
the OSD settings using a USB mouse.
LAN (RJ-45)
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit is capable of networking.
The LAN port allows the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit to
access the network/ Internet through an Ethernet connection.
Power Supply
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit includes an AC power
connection jack. Please use the power supply cord that ships with the unit.
NOTE: Use of other power supply may cause overloading.
Power Switch
The power switch is used to power up or shut down the unit.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
18
3. General System Setup
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT
series DVR allows the user to easily
access some general operations through the front panel. The following
subsections introduce general operation of the unit.
The regularly displayed OSD information and its positions are shown in the
following figure. The channel title is displayed on the top-left side of the
window, either in full screen mode or in multiple channel mode. The current
operating mode, including Call mode, Dome-Control mode, Playback mode,
Freeze mode and Sequence mode, is displayed on the bottom-left side of the
screen. The date/ time information is displayed on the bottom-right side.
Ch4
►*1
2005/11/09 PM04:31:22
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
19
3.1 Front Panel Introduction
The unit’s front panel controls enable the user to control the unit and preset
programmable functions.
3.1.1 LED Definition
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit’s LEDs on the front panel
are described as follows.
Power LED (Green)
The LED should be lit when the power is connected.
HDD LED (Green)
The LED will be lit while the HDD is processing data to or from the connected
HDD(s).
Alarm LED (Red)
The LED should be lit when an alarm is triggered.
Network LED (Green)
The LED should be lit when the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit
is connected to a network and blink when any data is being transferred.
REC LED (Red)
The LED should blink while the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit
is recording.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
20
3.1.2 Functional Keys
The DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit’s function keys on the front
panel are described below for normal operation.
COPY
This is used to quick export video to an external device, including USB
CD-RW and ThumbDrive®, etc. For more detailed operating instructions, refer
to section 4.4.2 Quick Video Export through Front Panel
CALL
Press to enter call monitor control mode; press ESC to exit.
NOTE: TS/TT supports Dual Monitor (refer to section 4.1.5).
Direction Keys
• In Zoom mode, these keys function as Direction keys.
• In the OSD setup menu, the Direction keys are used to move the cursor to
previous or next fields. To change the value in the selected field, press UP
/ DOWN keys.
DOME
Press this key to enter dome control mode. Please refer to section 4.6 Dome
Control for more details about controlling operation.
ESC
Press to cancel or exit from certain mode or OSD menu without changing the
settings made previously.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
21
MODE
Press repeatedly to select desired main monitor display format. There are four
view modes available: full screen, 4-window (2×2), 9-window (3×3), and
16-window (4×4). Refer to section 4.1.1 Viewing Modes for more detailed
information.
PLAY/ STOP
Press this key to switch between live image and playback video.
NOTE: Video taken within the latest 5 ~ 10 minutes cannot be played
back because the video is still saved in the buffer.
SEQ (Sequence)
Press to start automatic sequencing of the video coming in from the installed
cameras.
FREEZE
• Press FREEZE while viewing live image, the live video will be frozen, but
the date/ time information shown on the monitor will continue updating.
Press FREEZE again to return to live mode.
• Press FREEZE while playing recorded video, the playback video will be
paused. Press LEFT/ RIGHT to move the recorded video reverse/ forward
by a single step. Press FREEZE again to continue playing video.
MENU
Press this key to call up the OSD setup menu.
SEARCH
In both Playback and Live mode, the user can press SEARCH to call up the
Search menu for searching and playing back recorded video by date and time
or events.
ZOOM/ ENTER
• In OSD menu or selection interface, press this key to make the selection or
save settings.
• In live full screen view mode, press this key to view a 2× zoom image;
press it again to return.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
22
CHANNEL
• In both Live and Playback modes, press the CHANNEL key to view the
corresponding video in full screen. The number of the CHANNEL keys
corresponds to the number of cameras supported by the unit.
• In dome control mode, the key “1” is used to access the Set/ Go preset
menu; the key “2” is used to hide or display the dome setting parameters.
JOG/ SHUTTLE
The jog/ shuttle knob, shown in the figure below, is a combination of a shuttle
ring with an embedded jog disk, which is used to provide wide range in
playback control. Note that the jog/ shuttle knob is active only when the DVR
unit is in Playback mode.
• While playing back video, you can use the shuttle ring to select different
speeds of forward and backward playing. Rotating the shuttle ring causes
the unit to playback in fast forward/ backward playing speed. According to
the angle you rotate the shuttle ring, you can choose the playing speed
from 1×, 2×, 4×, 8×, 16×, and 32×, in both forward and reverse directions,
shown in the figure below:
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
23
• Inside the shuttle ring is the jog disk, shown in the illustration below, it can
be turned completely in either direction. Once you freeze the video, you
can use the jog disk to go to single-step play back. Clockwise rotation
causes forward one-step playback; and counterclockwise rotation causes
backward one-step playback. This is for JPEG recoding only.
3.2 Configuring the HDD in the unit
There is an empty cartridge positioned on the front panel where the user can
install a swappable HDD. There are two possible situations when you install a
HDD into your DVR.
• If you install a new HDD, the DVR will format it and add it into your
database automatically.
• If you install a used HDD that does not have the DVR format, the DVR will
show, “1 disk(s) with wrong data format! Please format then add to the
database manually”. Then please follow the steps described below:
- Enter the menu with the administrator privilege and access the
<Database Setup> submenu
- Access the <Internal (or external) Disks>
- When you see the available disk/s, select <format> to format it
- After formatting is OK, select <Add> to add the HDD(s) into your
database.
The recommended HDDs are listed as below:
Diamond Max Plus 9 80G/ 160G/ 300G
Maxtor
Diamond Max Plus 16 80G/ 160G/ 300G
Barracuda 7200.7 200G
Barracuda 7200.8 250G/ 300G/ 400G Seagate
Barracuda 7200.10 750G
Hitachi
Deskstar 7200rpm 60G/ 300G/ 400G/ 500G
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
24
3.3 Power Up/ Down the Unit
If you must shut down the DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit for
any reason, use the proper shut down and power up procedures to avoid
damage to your DVR unit..
To Power Up the Unit
First check if the type of power source available is compatible before plugging
in your DVR. Then turn on the unit using the power switch on the rear panel.
The color bar and system checking information will be shown on the monitor.
It will disappear when the unit has been completely powered up.
To Restart / Shutdown the Unit
Press MENU and input the administrator password to access the OSD Main
menu. Select <Shutdown> in Main Menu and press ENTER to enter the
Shutdown menu, which displays as follows.
Shutdown
1. Power Off
2. Reboot
Execute
Execute
<Power Off>
Select this item to shut down the unit. Do not disconnect the power during
shut down until the message “You can safely turn off DVR now!” displays.
<Reboot>
Select this item to reboot the unit. The color bar and system checking
information are displayed on the monitor until the unit is completely restarted.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
25
3.4 Entering OSD Setup Menu
The OSD Main menu contains a list of items that are used to configure the
DVR-4TN/ 8TN/ 16TN/ 16TS/ 16TT series unit. To enter the Main menu,
correct Administrator or User password is required.
Three sets of passwords are offered for different Administrators and Users – if
there is more than one.
To enter OSD Main menu, press MENU and then enter either Administrator or
User password. The Password Verification screen will display as follows.
Password Verification
________
Press Channel Keys To Enter Password
(4-8 Digits)
Press ◄ Key To Delete
NOTE: If entering wrong password for 3 times, the system will be
locked out, and you will not be able to enter OSD menu within 2
minutes.
The default passwords are shown in the following table. The same passwords
are used for entering the remote viewing software SpecoRemote™.
Administrator Passwords User Passwords
1234 4321
It is strongly recommended that you change the passwords to prevent
unauthorized access to the unit.
After entering the correct password, the Main menu is displayed.
Main Menu
1. System Setup
2. Monitor Setup
3. Camera Setup
4. Record Setup
5. Sequence Setup
6. Event Setup
7. Database Setup
8. Configuration
9. Video Export
10. Text Setup
11. Shutdown
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
26
Move the cursor up/ down over the OSD items using the Direction keys and
press ENTER to enter the selected sub-menu.
3.5 System Date/ Time Setting
The user can set the current date, time and other OSD parameters in the
Date/ Time menu. The administrator’s privileges are required for entering the
submenu. In the OSD Main menu, select <System Setup> and press ENTER,
then select <Date/ Time> to access the Date/ Time menu; the menu displays
as follows.
Date/ Time
1. Date
2. Time
3. Time Zone
4. Date/ Time Display
5. Date Display Mode
6. Time Display Mode
7. Date/ Time Order
8. Daylight Saving Time Setup
9. Network Time Protocol Setup
2005/02/21
PM10:39:26
OFF
1 Row
Y/M/D
24 HR
Date First
3.5.1 Set Date/ Time
Set Date/ Time
Select <Date>/ <Time> and press ENTER to adjust the settings. LEFT/
RIGHT keys are used to move the cursor to previous or next field, ENTER is
for selecting, and UP/ DOWN are used to change the value in the selected
field.
NOTE: The reset date/ time setting applies for recording new video,
the date and time of previously recorded video will not be changed.
NOTE: To avoid record database corruption, after changing the date/
time setting, it is recommended to clear the database.
Date/ Time Display
Users are allowed to choose to set the date/ time OSD displays in 1 or 2 rows.
Use the UP/ DOWN keys to change the setting. The default is to display the
date/ time OSD in one row.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
27
Date Display Mode
This function allows user to set the OSD display type of the date/ time. There
are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>. “Y”
represents “Year”, “M” represents “Month” and “D” represents “Day”.
Move to the desired item and press ENTER, the option starts blinking. Use UP
/ DOWN keys to change the setting. The default setting is <Y/M/D> in both
NTSC/ PAL formats.
Time Display Mode
The user can choose to set the time format to <12 hour> or <24 hour>. Use
the UP/ DOWN keys to change the format. The default setting is <12 hour>.
Date/ Time Order
This item is used to set the order of the date/ time display to <Date First> or
<Time First>. Use UP/ DOWN keys to change the setting.
3.5.2 Daylight Saving Time Setup
The items in this sub-menu are for those people whom live in certain regions
to observe Daylight Saving Time.
Daylight Saving Time
Select <ON> to enable, or <OFF> to disable the function.
If the function is disabled, the DST Start/ End time and DST Bias will be
grayed out and cannot be accessed.
NOTE: If this function is enabled, the date/ time information will be
shown on the screen with a DST icon when playing back recorded
video or searching video in the event list. “S” indicates summer time
and “W” indicates wintertime.
DST Start/ End
This is used to program the daylight saving duration. Use Direction keys to
move the cursor to the next or previous field, use UP/ DOWN to change the
settings in the selected field.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
28
DST Bias
<DST Bias> allows the user to set the amount of time to move forward from
the standard time for daylight saving time. The available options are <30>,
<60>, <90> and <120> minutes.
3.6 Network Time Protocol Setup
This section guides you to synchronize your unit to fit the local time.
Go the <System Setup> Æ <Date/ Time> Æ <Time Zone>. Refer to below
figure and select your time zone from the options.
Then go to <System Setup> Æ <Date/ Time> Æ <Network Time Protocol
Setup> and select <ON> for the item <Automatically Time Sync>. When this
function is ON, time sync will be performed every hour in order to observe
correct time of your local zone.
NOTE: If you want the unit to automatically synchronize the local time,
the <Time Zone> item MUST NOT be set to <OFF>, or the function
cannot be activated.
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
29
3.7 Record Schedule/ Quality Setting
The Record Setup menu allows the user to set recording quality, recording
schedules and other recording parameters. This menu will not be able to
access if you enter the OSD Setup Menu with User’s password. In the Main
menu, move the cursor to <Record Setup> and press ENTER; the following
menu is displayed.
Record Setup
1. Record Mode
2. Schedule Setup
3. Preset Config
4. Per Camera Config
5. ezRecord Setup
6. Data Lifetime
7. Pre-Alarm Recording
8. Circular Recording
9. Audio Recording
10. Purge Data
720×240@60PPS
Standard
0 Days
15 Sec
ON
ON
3.6.1 Record Mode
The Record Mode is for selecting resolution and recording rate. The relative
record settings, such as preset configuration, will follow the record mode
setting. In normal circumstance, we recommend you to select
<720×240@60PPS> in NTSC format; or <720×288@50PPS> in PAL format.
Move the cursor to <Record Mode> and press ENTER, then select a Record
mode using the UP/ DOWN keys.
NOTE: After changing the Record Mode setting, this warning message
“This will FORMAT ALL HARDDISKS and LOAD THE FACTORY
DEFAULT CONFIG!” will appear on the screen. Press ENTER to
confirm the selection. The unit will then start to format the hard disks
and load the factory default settings, or press ESC to abort.
We strongly recommend that you back up your programmed
configuration before making any changes to Record Mode
settings.
Loading...