CVC6146SCS Series
540 Line Color Dome Camera
Wall & Ceiling Mountable
Please read this manual thoroughly before operation and keep
it handy for further reference.
WARNING & CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE T HE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE
CAUTION
The lighting flash with an arrowhead symbol, within an equilate ral triangle is
Intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient m agnitude to constitute
a risk of electric shock to persons____________________________________
The exclamation point within an equilateral triangle is intended to alert the user
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL._______________
to
the
presence
of
important
operating
and
maintenance
(serving)
instructions
in the literature accompanying the appliance__________________
INFORMATION -This equipment has been tested and found to company with
limits for a class a digital device Pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
Interference When the equipments operated in a commercial environment.
This equipment generates, uses, and Can Radiate radio frequency energy and
if not installed and used in accordan ce with the instruction manual, may Cause
Harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which
Case the user will be required to correct the interference at his own expense.
WARNING – Change or modification not expressly approved by the manufacturer could void
the user’s authority to operate the e quipment_____________________________ _____
CAUTION : To prevent electric shock and risk of fire hazards.
DO
NOT
use
power
sources
other
than
that
specified
.
_
_____
DO NOT expose this appliance to rain or moisture.000
This installation should be made by a qualified service person and should conform to all local codes.
Contents
Package Contents
3
Precautions
4
Camera Installation
5
Features
Internal Components
6
8
OSD
9
1
Operating Your Camera
SET UP
SET UP LENS
10
10
10
SHUTTER SPEED CONTROL
BACK LIGHT
AUTO GAIN (AGC)
WHITE BALANCE
CAMERA TITLE
MIRROR
10
10
11
11
12
DAY/NIGHT/SYNC
MOTION DETECTION
PRIVACY
GAMMA
RESET
ADJUST
12
12
12
13
13
13
Specifications
EXIT
14
13
Dimensions
15
2
Warranty
16
PACKAGE CONTENTS
• Please make sure that the following items are included
in the package:
1 CVC6146SCS SeriesCamera
2 Mounting Screws
1 Video test Connector
Please leave this manual with the end-user for future
reference.
COMPATIBILITY
DFM Series
“A” type Box
3
Electrical Box is not included in the package but
Is compatible with the camera
PRECAUTIONS
• THIS DOME CAMERA SHOULD BE ONLY INSTALLED BY
QUALIFIED PERSONNEL
• TO PREVENT A FIRE OR ELECTRICAL HAZARD PLEASE USE
PROPER POWER CABLE
• THE DOME COVER SHOULD BE TREATED WITH CARE. DO
NOT CLEAN THE COVER WITH AN ABRAISIVE CLEANING
MATERIAL - PLEASE USE A SOFT CLOTH OR TISSUE TO
CLEAN THE DOME COVER
• THERE ARE NO USER-SERVICEABLE PARTS INSIDE.
PLEASE DO NOT DISASSEMBLE THIS CAMERA OTHER THAN
TO MAKE INITIAL ADJUSTMENTS
• PLEASE USE A UL APPROVED REGULATED 24 VOLT AC OR
12 VOLT DC POWER SUPPLY
• PLEASE USE APPROPRIATE LOW VOLTAGE POWER CABLE
TO PREVENT FIRE OR ELECTRICAL SHOCK
• PLEASE INSURE THAT YOUR INSTALLATION AREA CAN
SUPPORT THE WEIGHT OF THE CAMERA
• PLEASE HANDLE THIS CAMERA CAREFULLY:
- DON’T USE A STRONG OR ABRASIVE DETERGENT WHEN
CLEANING THE CAMERA.
- DO NOT EXPOSE THE CAMERA TO DIRECT SUN
4
CAMERA INSTALLATION
CONNECT POWER CABLE
1. WHEN USING 12 VOLTS DC (constant voltage 500 mA)
CONNECT
POWER INPUT:RED
2. WHEN USING 24 VOLTS AC (20 Volt Amps)
-CONNECT ACCESSORY CABLE TO THE POWER JACK
AND CONNECT 24V AC TO THE LEAD
POWER SUPPLY
CONNECT
CENTER:(+)
3. CONNECT VIDEO CABLE
-CONNECT BNC CABLE TO THE BNC JACK.
CONNECT
BLACK:(-)
POWER RED(+)
POWER SUPPLY
AC 24V
YELLOW:VIDEO OUT
5
INTERNAL COMPONENTS
1. Mechanical
(2) Joy Stick
Controller
(1) DC AUTO-IRIS LENS
Adjust between TÅÆW (TELE ÅÆ WIDE) to set the
(1) DC Auto iris Lens
(2.8~11mm)
angle (focal length) Set the focus by adjusting
∞
ÅÆ
N
NOTE: BOTH OF THE ABOVE ADJUSTMENTS GET LOCKED
INTO POSITION THROUGH THE USE OF "LOCKING HANDLES".
(2) JOY STICK
TO SET THE OSD (ON SCREEN DISPLAY) , PRESS THE JOY
6
STICK FOR ONE SECOND AND SET AS DESCRIBED
IN THE MANUAL
INTERNAL COMPONENTS
2. Joy Stick
Video Test Terminal
UP
RIGHT
SET
OSD Joystick Switch
LEFT
DOWN
7
Push the Joy stick for one second, and the OSD appears
on the screen. Move the Joy Stick up, down, left & right to
control the OSD functions.
Features
When the image is in front of strong background lighting,
your camera allows you to get a clear image.
BLC
Horizontal resolution of 540 TV lines is
achieved by using a SONY Double Speed CCD with
410,000 pixels, yielding pictures with a high S/N ratio.
High Resolution
OSD
All camera functions are menu driven for easy use.
The camera can show color pictures in all lighting
conditions, or you can have it automatically switch to a B/W
ELECTRONIC DAY/NIGHT
Built in motion detector with adjustable areas of coverage will
flash a warning on the screen when motion is detected.
Motion Detection
picture in low light conditions
8
Operating your camera
OSD Function
LENS
SHUTTER
BLC
DC MAN UAL
A
UTO FLK FIXED MAN UA L
A
GC
WHITE BAL.
FUNCTION
OFF ON
OFF ON
ATWA
WB FIXED MAN UA L
RETURN
CAMERA ID
MIRROR
DAY / NIGHT
MOTION DET
PRIVACY
GAMMA
ON
OFF
ON OF F
COLOR AUT O B/W
ON OFF
ON OFF
LANGUAGE
RESET
0.05~1.00
USER
ENGLISH
한국어 汉语 漢語 日本 語
A
DJUS
T
CONTRAST
SHARPN ESS
CB_GAIN
9
RETURN
CR_GAIN
RETURN
Operating your camera – SETUP
1) LENS
<DC / MANUAL>
2) SHUTTER
<AUTO / FLK / FIXED / MANUAL
>
Selects Lens Type.
Adjusts shutter settings.
Flicker-less mode (FLK) reduces on-screen flickering.
Electronic Shutter Control (AUTO) adjusts brightness level on screen.
Manual mode allows you to adjust the shutter speed
from1/60~1/120,000 of a second (NTSC), or 1/50~1/100,000(PAL).
FLK is the only option available when the camera lens is set to the
recommended DC mode.
3) BLC
<ON / OFF>
4) AGC
Provides light level control to overcome severe
backlighting conditions.
10
<ON / OFF>
Adjusts value of AGC gain. Increase the GAIN level to brighten the
picture. (noise / distortion may develop)
5) WHITE BAL
.
<ATC / AWB / FIXED / MANUAL>
Controls color on the screen.
Select Auto Tracking White Balance (ATW) when the color
temp. is 2400°K~12000°K (for example when under a fluorescent
light or outdoors).
Manual mode allows you to increase or decrease the red
or blue factor on screen.
Auto White Balance Control (AWC) automatically adjusts
the white balance to your specific environment.
6) FUNCTION
(6-1) RETURN
Return to the main SETUP menu.
<OFF / ON>
(6-2) CAMERA ID
Display a name and/or
number on the monitor.
Return to the main SETUP menu.
To add a camera title:
CAMERA ID : Select character by moving joystick up and
down.
C = Delete the entire name and start again.
111
POSITION = Position the camera title on the screen.
Push down the button to set the position.
(6-3) MIRROR
<ON / OFF>
Produce a horizontal mirror image on screen.
(6-4) DAY / NIGHT
<AUTO / COLOR / BW>
AUTO = Automatically detect color or black/white.
Delay – When the Day & Night function starts or stops (0~15sec)
Start Level –Set the brightness level where the Day & Night
function start to operate
End Level – Set the brightness level where the Day & Night
function stops operate
COLOR = Full time color mode
B/W = Full time B/W mode
(6-5) MOTION DET
<ON / OFF>
AREA = Select motion detection area.
MOTION TH = Select low luminous motion threshold value.
MOTION TRACE = Display motion trace.
(6-6) PRIVACY
<ON / OFF>
12
AREA SEL = Select a motion detection grid (top left, top ,right, bottom left,
bottom right) to modify.
AREA STATE = Activate or deactivate the selected grid.
LEFT/RIGHT/TOP/BOTTOM = Alter the dimensions of the selected grid.
COLOR = Select color of privacy area.
(6-7) GAMMA
<ON / USER>
Sharpen the image on screen.
Excessive sharpening may cause picture noise.
(6-8) LANGUAGE (English / 한국어 / 汉语/漢語 / 日本語)
Choose language that should be displayed.
(6-9) RESET
Restore all factory default settings.
7)
ADJUST
Adj
ust level of sharpness / contrast / CB_Gain /
CR_Gain.
8) EXIT(SAVE)
Save OSD settings and exit the SETUP menu.
1311
SPECIFICATIONS
1/3”, SONY SUPER HAD CCD ,
410
,
000 pixels
DC 12V & AC24V ( Dual Voltag e)
CVC6146SCS Series
Imag e Sensor
Power Source
ITEM
1.0V [p- p] Composite, 75
Ω
2 : 1 Inter laced 525 Li nes / 60Fi elds / 30F rames
1 : 1.3 ~ 2.0
755(H ) x 582(V) , 1/3” CCD
,p
Video O utput
Scanni ng System
Maximum Aperture Ratio
Effecti ve Pixels
A
UTO / OFF
W-ATW / FIXED / AWB / MANU AL
1/50 ~ 1/100,000 sec
ON / OFF
540 TV Li ne
Back Lig ht Compensation
WHITE BALANC E
Elec tr ic Shutter Speed
Gain Control
Resolution
Built - in
MD 64 / OFF
50dB (Weig ht On)
0.3Lux (F 1.3)
On Scr een Displ ay
Mot ion Detecti on
S/N ( Y sig nal)
Mi n. Ill umination
14
-10℃ ~ +50℃ (14℉ ~122℉)
ON / OFF (4 Prog rammable Zone)
30% ~ 90% R H
Oper ati onal Temper atur e
PRIVAC Y Func ti on
Oper ati onal Humi dity
DIMENSIONS
* SIDE VIEW
* TOP VIEW
15
WARRANTY
16
MEMO
200 New Highway
Amityville, NY 11701
631-957-8700
www.specotech.com
Rev. 100125
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice
and without incurring any obligation.
Loading...