Page 1
e
Thank you for your choice of Speco Technologies’
an easy way to mount your in
Mounting Brackets
Cut hole of appropriate size for your speaker in ceiling tile.
2' rails on opposite sides of the bracket. The rail is folded, and the bracket should slide between the folds.
the bracket to be centered on the rails.
Line bracket and rails over ceiling tile hole.
If you are using a 2' x 2' tile, the position of the rails on the tile does not matter.
If you are using a 2' x 4' tile, make
they line up with the ceiling tile grid.
Insert the speaker with the backside going through the open side of the tile (i.e., the side the bracket is not on). The
clamps should go past the tile and bracket.
Using a screwdriver, tighten each dog
Insert tile, speaker and bracket into ceiling grid.
positioned in the tile grid as described above, there should be no issues.
For heavier speakers that include a safety loop, it's recommended using that loop as an additional measure of safety
by securing the speaker to the building structure wit
veloping
We reserve the right to modify product design and specifications without notice and without incurring any obligation.
. 200 New Highway .
. This unit is designed and
as the metal is sharp.***
sure the rails lay across the 2' side. They will not provide support unless
hin tiles may show some sag, but as long as the rails ar
BBRRCC SSeerriieess CCeeiilliinngg TTiille
MMoouunnttiinngg BBrraacckkeetts
manufactured to provide
BRC Series mounting brackets
-ceiling speakers.
INCLUDED IN PACKAGE:
(2) Center
(4) Mounting Rails
INSTALLATION INSTRUCTIONS:
Slide
Position
o
o
***Use CAUTION
s
Speco Technologies is constantly de
Speco Technologies
dog-leg
-leg clamp tightly so that it clamps the bracket and tile.
and improving products.
Amityville . NY . 11701 . www.specotech.com
T
h appropriate gauge wire.
e properly
Rev. 02/21/18
Loading...