Speco AP248, AP324 Specsheet
300Mbps Outdoor Point-to-Point
Video Network Bridge with DIP Function
AP224 24V, 2.4GHz
AP248 48V, 2.4GHz
AP324 24V, 5.85GHz
AP348 48V, 5.85GHz
Features
•Dip switch programming saves significant setup time
•Point-to-point connection between camera and recorder/viewer
or two network points
•Signal up to 7000’ line of sight
•Includes ball joint mount with wall and pole mount attachments
•Backward compatible with AP200M / AP300M / AP200M48 / AP300M48
•Sold each, can be used up to four points to one
•2 year warranty
Specifications
DRAM DDR2 64MByte
FLASH 8MByte
Port 10/100Mbps LAN*2
11a: 54M, 48M, 36M, 24M, 18M, 12M, 9M, 6Mbps
HT20: 7.2M, 14.4M, 21.7M, 28.9M, 43.3M, 57.8M,
65M, 72.2M, 14.4M, 28.9M, 43.3M, 57.8M, 86.7M,
Speed
Transmission DSSS, up to 7000’ line of sight
Modulation OFDM / BPSK / QPSK / CCK / DQPSK / DBPSK
Standards
Protocol
Power
RF@25±2dB
115.6M ,130M, 144.4Mbps
HT40: 15M, 30M, 45M, 60M, 90M, 120M, 135M,
150M, 30M, 60M, 90M, 120M, 180M, 240M, 270M,
300Mbps
IEEE802.11n, IEEE802.11g, IEEE802.11b,
IEEE802.3u, IEEE802.3af, IEEE802.3at
CSMA/CA, TCP/IP, IPX/SPX, NetBEUI, DHCP,
NDIS3, NDIS4, NDIS5
AP224/AP324: PoE 24V 1A (included)
AP248/AP348 PoE 48V 0.5A (not included)
802.11a
• 6-24Mbps I 27±2dB
• 36-48Mbps I 26±2dB
• 54Mbps I 25±2dB
802.11n
Sensitivity
Frequency
Direction Horizontal / Vertical
Gain 18DBi
WEP Management
SNMP MIB
Telnet Yes
Serial Yes
MAC address control
Encryption WEP 64/128bits,WPA,WPA2,802.1x
Power Supply
Operating Temperature
Storage Temperature
Humidity ≤95% (non-condensed)
Dimensions 7.9” (Dia.) x 3.12” Deep, 5.12” Deep with Mount
Front View
802.11a I 6Mbps ≤ -89; 54Mbps ≤ -73
802.11n
• HT20 I MCS 0 ≤ -86; MCS 7 ≤ -68
• HT40 I MCS 0 ≤ -83; MCS 7 ≤ -65
AP3XX: 4900 - 6100MHz
AP2XX: 2372 - 2532MHz
Yes
Yes
Yes
APX24 includes 24V PoE injector
APX48 requires 48V PoE power (not included)
-22° F - 149° F
-58° F - 176° F
Side View
Bottom View
Example of
AP324/AP224
setup
A
R
E
Y
W
Y
A
T
R
N
R
A
Speco Technologies is constantly developing and improving products. We reserve the right to modify product design and specications without notice
and without incurring any obligation. Spec Rev. 8/9/17
800-645-5516 • Fax: 631-957-9142 or 631-957-3880 • specotech.com
Loading...