Speco WDRD20H, WDRB11H, WDRD10H, WDRD11H, WDRD21H Instruction Manual

INSTRUCTION
MANUAL

SPECO 960H WDR Series

Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 12/01/2013

WDRB10H

(Outdoor IR Bullet Camera)

WDRD10H

(Outdoor IR Dome Camera)

WDRD20H

(Indoor IR Dome Camera)

WDRB11H

(Outdoor Bullet Camera with mount plate)

WDRD11H

(Outdoor Dome Camera)

WDRD21H

(Indoor Wall & Ceiling Mount Dome Camera)

WDRD21HW

(Indoor Wall & Ceiling Mount Dome Camera)

- 1 -

◑



Contents ...................................................... 1

◑



Precautions ................................................. 2, 3

◑



Safety Instructions ...................................... 4

◑



Package Contents ....................................... 5

◑



Camera Installation ..................................... 6-15

◑



Specications .............................................. 16-21

◑



Camera Dimension ..................................... 22-24

◑



Features ...................................................... 25

◑



OSD Menu Details ...................................... 26-56

◑



Trouble Shooting ......................................... 57

Precautions

- 2 -

Precautions

Do not install the camera in
extreme temperature conditions.

Do not touch the front lens of the
camera.

Never keep the camera pointed
directly at strong light.

Do not expose the camera to
radioactivity.

Do not install the camera under
unstable lighting conditions.

Do not drop the camera or subject
it to physical shocks.

Only use the camera under conditions
where temperatures are between

-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.

This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.

It can cause malfunctions to occur. If exposed to radioactivity the CCD

will fail.

Severe lighting change or flicker can
cause the camera to work improperly.

Housing damage can compromise
weatherproof ratings.

NOTE

* If the camera is exposed to spotlight or object reflecting strong light,

smear or blooming may occur.

* please check that the power satisfies the normal specification before

connecting the camera.

- 3 -

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ISO14001

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ISO14001

The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ISO14001

The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.

INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.

WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

☞Do NOT use power sources other than those specified.

In USA and Canada, Use Class 2 Power Supply Only

- 4 -

Safety Instructions

Precautions for use

Please handle this camera carefully :

◑

This camera should be installed by qualied personnel only

◑

There are no user serviceable parts inside

◑

Do not disassemble this camera other than to make initial adjustments

◑

Use a UL approved regulated 24 volt AC or 12 volt DC power supply

◑

Use appropriate low voltage power cable to prevent re or electrical shock

◑

Please insure that your installation area can support the weight of the camera

◑

Do not use a strong or abrasive detergent when cleaning the camera

◑

Do not install near cooling or heating device

- 5 -

Package Contents

Please make sure that the following items are included in the Package:

1) WDRB10H

• 1 Video Test Connector, Power Jack

• 1 Focus Adjustment

• 1 Bracket Base

• 1 Wrench

• Set Screw

- 4 Tapping Screws 4x25

- 4 Hexagon Socket Screws M5x10

2) WDRD10H

• 1 Video Test Connector, Power Jack

• 1 Chameleon Cover

• 1 Wrench

• Set Screw

- 3 Tapping Screws 4x40

- 1 Hexagon Socket Screw M4x8

3) WDRD20H

• 1 Video Test Connector, Power Jack

• 1 Chameleon Cover

• Set Screw

- 3 Tapping Screws 4x25

4) WDRB11H

• 1 Video Test Connector, Power Jack

• 1 Bracket Base

• 2 Wrenches

• Set Screw

- 4 Tapping Screws 4x25

- 4 Hexagon Socket Screws 5x10

5) WDRD11H

• 1 Video Test Connector, Power Jack

• 1 Chameleon Cover

• 1 Wrench

• Set Screw

- 3 Tapping Screws 4x40

- 1 Hexagon Socket Screw M4x8

6) WDRD21H

• 1 Video Test Connector, Power Jack

• 2 Screws

- 2 Tapping Screws 4x20

7) WDRD21HW

• 1 Video Test Connector, Power Jack

• 2 Screws

- 2 Tapping Screws 4x20

- 6 -

CAMERA INSTALLATION

jvuulj{Gwv~lyGjhislG

XUG~oluG|zpunGXYG}vs{zGkjGOGG\WWGhPG

YUG~oluG|zpunGY[G}vs{zGhjGO[WG}GhP

ZUGjvuulj{G}pklvGjhislG

Tjvuulj{GiujGjhislG{vG{olGiujGqhjrUG

[UGjvuulj{GhGGOyGP

TjGORGSGjvtPGGwGGGOTUGjvtPGG

uGGGlGhGkGGtG
kGG˄vu˅GGGU

kjGXY}GwGz

wGpGaylk

jGaGORP

ishjraOTP

ylkORP

wGz

hjGY[}

R

T

jvtG

hGvG

wGhGk G

uGhGk

- 7 -

CAMERA INSTALLATION

Compatibility

2) WDRD10H / WDRD20H

CVCJBD INTPMDFM INTCMINTWM

1) WDRB10H

INTCM INTJBS CVCJBB

- 8 -

CAMERA INSTALLATION

Compatibility

3) WDRB11H

CVCJBB INTJBS INTCM

4) WDRD11H

CVCJBD INTPMDFM INTCMINTWM

- 9 -

CAMERA INSTALLATION

Compatibility

5) WDRD21H / WDRD21HW

DFM

- 10 -

1. WDRB10H

TAPPING SCREW 4X25, 4EA

HEXAGON SOCKET SCREW M5X10, 4EA

CAMERA ASSEMBLY

CAMERA INSTALLATION

CAUTION : The installation instructions in this manual are for use by qualified service
personnel only. To reduce the risk of electric shock, do not perform any servicing other
than that contained in the operating instructions unless you are qualified to do so.

- 11 -

2. WDRD10H

BASE ASSEMBLY

TAPPING SCREW 4X25, 3EA

DOME COVER ASSEMBLY

CAMERA INSTALLATION

- 12 -

3. WDRD20H

TAPPING SCREW 4X25, 3EA

DOME COVER ASSEMBLY

BASE ASSEMBLY

CAMERA INSTALLATION

- 13 -

4. WDRB11H

HEXAGON SOCKET SCREW M5X10, 4EA

TAPPING SCREW 4X25, 4EA

BASE ADAPTOR BRACKET

CAMERA INSTALLATION

CAMERA ASSEMBLY

- 14 -

5. WDRD11H

CAMERA INSTALLATION

BASE ASSEMBLY

TAPPING SCREW 4X25, 3EA

DOME COVER ASSEMBLY

- 15 -

6. WDRD21H / WDRD21HW

TAPPING SCREW 4X20, 2EA

DOME COVER ASSEMBLY

BASE ASSEMBLY

CAMERA INSTALLATION

- 16 -

SPECIFICATIONS

Speco Technologies

(Outdoor IR Bullet Camera)

DC Auto Iris Varifocal Lens 2.8-12mm

WDRB10H

■

MODEL

WDRB10H

1/3'' SONY HAD CCD 960H (DUAL SCAN)

NTSC

1,028(H) x 508(V)
976(H) x 494(V)

2:1 Interlace
Internal
Available
ON/OFF

700 TV Lines

52dB (AGC off, Weight on)

0.000006LUX(IR LED ON)
ATW(1,800K ~ 10,500K) / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK

AUTO / (1/60SEC~ 1/100,000SEC)
AUTO(x2~ x512)

Level Adjustable (MAX 42dB)
OFF, LOW, MIDLOW, MID, MIDHIGH, HIGH (2D+3D)
OFF / ON (CONTRAST: LOW, MIDLOW, MID, MIDHIGH, HIGH)

ON/OFF (4 Zone)
ON/OFF (15 Zone)

OFF , V-FLIP, H-FLIP, HV-FLIP
0 ~15 Level Adjustable
COLOR, AUTO_(EXT ON/OFF)
SMART- IR(AUTO, CENTER Adjustable) , ATR WD-EX ON/OFF
0 ~ 255 Level Adjustable (x1 ~ x16) PAN / TILT

ON/OFF
Auto: 64 Points
Coaxial

ENGLISH,JAPANESE,DEUTSCH,FRENCH, RUSSIAN, PORTUGUESE, SPANISH
Dual Voltage
IR LED ON:700mA Max
DC Auto Iris Varifocal Lens (2.8-12mm)

-4ºF ~ 140ºF RH 95% Max

-4ºF ~ 140ºF RH 95% Max

3.94"(W) * 3.94"(H) * 8.27"(D)

3.09 Ibs

Image Sensor

TV System

Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D

BLC / HLC

Horizontal Resolution
S/N (Y Signal)
Minimum Illumination
White Balance
Electronic Shutter Speed
Slow Shutter (Sense-Up)
Gain Control
2D.3DNR
WDR
Motion Detection
Privacy
Mirror
Sharpness
Day/Night switch

IR OPT (SMART- IR, ATR WD-EX)

Digital E-ZOOM
DIS

DEFECT ADJ

Communication

Language

Power
Power Consumption

Lens

Storage Temperature
Operating Temperature
Dimension
Weight

- 17 -

SPECIFICATIONS

Speco Technologies

(Outdoor IR Dome Camera)

DC Auto Iris Varifocal Lens 2.8-12mm

WDRD10H

■

MODEL

WDRD10H

1/3'' SONY HAD CCD 960H (DUAL SCAN)

NTSC

1,028(H) x 508(V)
976(H) x 494(V)

2:1 Interlace
Internal
Available
ON/OFF

700 TV Lines

52dB (AGC off, Weight on)

0.000006LUX(IR LED ON)
ATW(1,800K ~ 10,500K) / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK

AUTO / (1/60SEC~ 1/100,000SEC)
AUTO(x2~ x512)

Level Adjustable (MAX 42dB)
OFF, LOW, MIDLOW, MID, MIDHIGH, HIGH (2D+3D)
OFF / ON (CONTRAST: LOW, MIDLOW, MID, MIDHIGH, HIGH)

ON/OFF (4 Zone)
ON/OFF (15 Zone)

OFF , V-FLIP, H-FLIP, HV-FLIP
0 ~15 Level Adjustable
COLOR, AUTO_(EXT ON/OFF)
SMART- IR(AUTO, CENTER Adjustable) , ATR WD-EX ON/OFF
0 ~ 255 Level Adjustable (x1 ~ x16) PAN / TILT

ON/OFF
Auto: 64 Points
Coaxial

ENGLISH,JAPANESE,DEUTSCH,FRENCH, RUSSIAN, PORTUGUESE, SPANISH
Dual Voltage
IR LED ON:500mA Max
DC Auto Iris Varifocal Lens (2.8-12mm)

-4ºF ~ 140ºF RH 95% Max

-4ºF ~ 140ºF RH 95% Max

5.12"(Dia) * 3.94"(H)

1.98 Ibs

Image Sensor

TV System

Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D

BLC / HLC

Horizontal Resolution
S/N (Y Signal)
Minimum Illumination
White Balance
Electronic Shutter Speed
Slow Shutter (Sense-Up)
Gain Control
2D.3DNR
WDR
Motion Detection
Privacy
Mirror
Sharpness
Day/Night switch

IR OPT (SMART- IR, ATR WD-EX)

Digital E-ZOOM
DIS

DEFECT ADJ

Communication

Language

Power
Power Consumption

Lens

Storage Temperature
Operating Temperature
Dimension
Weight

- 18 -

SPECIFICATIONS

Speco Technologies

(Indoor IR Dome Camera)

DC Auto Iris Varifocal Lens 2.8-12mm

WDRD20H

■

MODEL

WDRD20H

1/3'' SONY HAD CCD 960H (DUAL SCAN)

NTSC

1,028(H) x 508(V)
976(H) x 494(V)

2:1 Interlace
Internal
Available
ON/OFF

700 TV Lines

52dB (AGC off, Weight on)

0.000006LUX(IR LED ON)
ATW(1,800K ~ 10,500K) / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK

AUTO / (1/60SEC~ 1/100,000SEC)
AUTO(x2~ x512)

Level Adjustable (MAX 42dB)
OFF, LOW, MIDLOW, MID, MIDHIGH, HIGH (2D+3D)
OFF / ON (CONTRAST: LOW, MIDLOW, MID, MIDHIGH, HIGH)

ON/OFF (4 Zone)
ON/OFF (15 Zone)

OFF , V-FLIP, H-FLIP, HV-FLIP
0 ~15 Level Adjustable
COLOR, AUTO_(EXT ON/OFF)
SMART- IR(AUTO, CENTER Adjustable) , ATR WD-EX ON/OFF
0 ~ 255 Level Adjustable (x1 ~ x16) PAN / TILT

ON/OFF
Auto: 64 Points
Coaxial

ENGLISH,JAPANESE,DEUTSCH,FRENCH, RUSSIAN, PORTUGUESE, SPANISH
Dual Voltage
IR LED ON:500mA Max
DC Auto Iris Varifocal Lens (2.8-12mm)

-4ºF ~ 140ºF RH 95% Max

-4ºF ~ 140ºF RH 95% Max

5.12"(Dia) * 3.94"(H)

1.32 Ibs

Image Sensor

TV System

Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D

BLC / HLC

Horizontal Resolution
S/N (Y Signal)
Minimum Illumination
White Balance
Electronic Shutter Speed
Slow Shutter (Sense-Up)
Gain Control
2D.3DNR
WDR
Motion Detection
Privacy
Mirror
Sharpness
Day/Night switch

IR OPT (SMART- IR, ATR WD-EX)

Digital E-ZOOM
DIS

DEFECT ADJ

Communication

Language

Power
Power Consumption

Lens

Storage Temperature
Operating Temperature
Dimension
Weight

- 19 -

SPECIFICATIONS

Speco Technologies

(Weatherproof Bullet Camera with mount plate)

DC Auto Iris Varifocal Lens 2.8-12mm

WDRB11H

■

MODEL

WDRB11H

1/3'' SONY HAD CCD 960H (DUAL SCAN)

NTSC

1,028(H) x 508(V)
976(H) x 494(V)

2:1 Interlace
Internal
Available
ON/OFF

700 TV Lines

52dB (AGC off, Weight on)

0.000006LUX
ATW(1,800K ~ 10,500K) / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK

AUTO / (1/60SEC~ 1/100,000SEC)
AUTO(x2~ x512)

Level Adjustable (MAX 42dB)
OFF, LOW, MIDLOW, MID, MIDHIGH, HIGH (2D+3D)
OFF / ON (CONTRAST: LOW, MIDLOW, MID, MIDHIGH, HIGH)

ON/OFF (4 Zone)
ON/OFF (15 Zone)

OFF , V-FLIP, H-FLIP, HV-FLIP
0 ~15 Level Adjustable
COLOR, AUTO_(EXT ON/OFF)
SMART- IR(AUTO, CENTER Adjustable) , ATR WD-EX ON/OFF
0 ~ 255 Level Adjustable (x1 ~ x16) PAN / TILT

ON/OFF
Auto: 64 Points
Coaxial

ENGLISH,JAPANESE,DEUTSCH,FRENCH, RUSSIAN, PORTUGUESE, SPANISH
Dual Voltage
DC 12V 400mA / AC24V 170mA
DC Auto Iris Varifocal Lens (2.8-12mm)

-4ºF ~ 140ºF RH 95% Max

-4ºF ~ 140ºF RH 95% Max

3.46"(W) * 4.01"(H) * 11.02"(D)
3 lbs

Image Sensor

TV System

Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D

BLC / HLC

Horizontal Resolution
S/N (Y Signal)
Minimum Illumination
White Balance
Electronic Shutter Speed
Slow Shutter (Sense-Up)
Gain Control
2D.3DNR
WDR
Motion Detection
Privacy
Mirror
Sharpness
Day/Night switch

IR OPT (SMART- IR, ATR WD-EX)

Digital E-ZOOM
DIS

DEFECT ADJ

Communication

Language

Power
Power Consumption

Lens

Storage Temperature
Operating Temperature
Dimension
Weight

- 20 -

SPECIFICATIONS

Speco Technologies

(Weatherproof Dome Camera with Chameleon™ Cover)

DC Auto Iris Varifocal Lens 2.8-12mm

WDRD11H

■

MODEL

WDRD11H

1/3'' SONY HAD CCD 960H (DUAL SCAN)

NTSC

1,028(H) x 508(V)
976(H) x 494(V)

2:1 Interlace
Internal
Available
ON/OFF

700 TV Lines

52dB (AGC off, Weight on)

0.000006LUX
ATW(1,800K ~ 10,500K) / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK

AUTO / (1/60SEC~ 1/100,000SEC)
AUTO(x2~ x512)

Level Adjustable (MAX 42dB)
OFF, LOW, MIDLOW, MID, MIDHIGH, HIGH (2D+3D)
OFF / ON (CONTRAST: LOW, MIDLOW, MID, MIDHIGH, HIGH)

ON/OFF (4 Zone)
ON/OFF (15 Zone)

OFF , V-FLIP, H-FLIP, HV-FLIP
0 ~15 Level Adjustable
COLOR, AUTO_(EXT ON/OFF)
SMART- IR(AUTO, CENTER Adjustable) , ATR WD-EX ON/OFF
0 ~ 255 Level Adjustable (x1 ~ x16) PAN / TILT

ON/OFF
Auto: 64 Points
Coaxial

ENGLISH,JAPANESE,DEUTSCH,FRENCH, RUSSIAN, PORTUGUESE, SPANISH
Dual Voltage
DC 12V 400mA / AC24V 170mA
DC Auto Iris Varifocal Lens (2.8-12mm)

-4ºF ~ 140ºF RH 95% Max

-4ºF ~ 140ºF RH 95% Max

5.12"(Dia) * 3.94"(H)

1.98 lbs

Image Sensor

TV System

Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D

BLC / HLC

Horizontal Resolution
S/N (Y Signal)
Minimum Illumination
White Balance
Electronic Shutter Speed
Slow Shutter (Sense-Up)
Gain Control
2D.3DNR
WDR
Motion Detection
Privacy
Mirror
Sharpness
Day/Night switch

IR OPT (SMART- IR, ATR WD-EX)

Digital E-ZOOM
DIS

DEFECT ADJ

Communication

Language

Power
Power Consumption

Lens

Storage Temperature
Operating Temperature
Dimension
Weight

- 21 -

SPECIFICATIONS

Speco Technologies

(Indoor Wall & Ceiling Mount Dome Camera)

DC Auto Iris Varifocal Lens 2.8-12mm

WDRD21H

■

MODEL

WDRD21H

1/3'' SONY HAD CCD 960H (DUAL SCAN)

NTSC

1,028(H) x 508(V)
976(H) x 494(V)

2:1 Interlace
Internal
Available
ON/OFF

700 TV Lines

52dB (AGC off, Weight on)

0.000006LUX
ATW(1,800K ~ 10,500K) / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK

AUTO / (1/60SEC~ 1/100,000SEC)
AUTO(x2~ x512)

Level Adjustable (MAX 42dB)
OFF, LOW, MIDLOW, MID, MIDHIGH, HIGH (2D+3D)
OFF / ON (CONTRAST: LOW, MIDLOW, MID, MIDHIGH, HIGH)

ON/OFF (4 Zone)
ON/OFF (15 Zone)

OFF , V-FLIP, H-FLIP, HV-FLIP
0 ~15 Level Adjustable
COLOR, AUTO_(EXT ON/OFF)
SMART- IR(AUTO, CENTER Adjustable) , ATR WD-EX ON/OFF
0 ~ 255 Level Adjustable (x1 ~ x16) PAN / TILT

ON/OFF
Auto: 64 Points
Coaxial

ENGLISH,JAPANESE,DEUTSCH,FRENCH, RUSSIAN, PORTUGUESE, SPANISH
Dual Voltage
DC 12V 250mA
DC Auto Iris Varifocal Lens (2.8-12mm)

-4ºF ~ 140ºF RH 95% Max

-4ºF ~ 140ºF RH 95% Max

5.51"(Dia) * 4.09"(H)

1.54 lbs

Image Sensor

TV System

Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D

BLC / HLC

Horizontal Resolution
S/N (Y Signal)
Minimum Illumination
White Balance
Electronic Shutter Speed
Slow Shutter (Sense-Up)
Gain Control
2D.3DNR
WDR
Motion Detection
Privacy
Mirror
Sharpness
Day/Night switch

IR OPT (SMART- IR, ATR WD-EX)

Digital E-ZOOM
DIS

DEFECT ADJ

Communication

Language

Power
Power Consumption

Lens

Storage Temperature
Operating Temperature
Dimension
Weight

- 22 -

SPECIFICATIONS

Speco Technologies

(Indoor Wall & Ceiling Mount Dome Camera)

DC Auto Iris Varifocal Lens 2.8-12mm

WDRD21HW

■

MODEL

WDRD21HW

1/3'' SONY HAD CCD 960H (DUAL SCAN)

NTSC

1,028(H) x 508(V)
976(H) x 494(V)

2:1 Interlace
Internal
Available
ON/OFF

700 TV Lines

52dB (AGC off, Weight on)

0.000006LUX
ATW(1,800K ~ 10,500K) / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK

AUTO / (1/60SEC~ 1/100,000SEC)
AUTO(x2~ x512)

Level Adjustable (MAX 42dB)
OFF, LOW, MIDLOW, MID, MIDHIGH, HIGH (2D+3D)
OFF / ON (CONTRAST: LOW, MIDLOW, MID, MIDHIGH, HIGH)

ON/OFF (4 Zone)
ON/OFF (15 Zone)

OFF , V-FLIP, H-FLIP, HV-FLIP
0 ~15 Level Adjustable
COLOR, AUTO_(EXT ON/OFF)
SMART- IR(AUTO, CENTER Adjustable) , ATR WD-EX ON/OFF
0 ~ 255 Level Adjustable (x1 ~ x16) PAN / TILT

ON/OFF
Auto: 64 Points
Coaxial

ENGLISH,JAPANESE,DEUTSCH,FRENCH, RUSSIAN, PORTUGUESE, SPANISH
Dual Voltage
DC 12V 250mA
DC Auto Iris Varifocal Lens (2.8-12mm)

-4ºF ~ 140ºF RH 95% Max

-4ºF ~ 140ºF RH 95% Max

5.51"(Dia) * 4.09"(H)

1.54 lbs

Image Sensor

TV System

Total Pixels
Effective Pixels
Scanning System
Synchronization
O.S.D

BLC / HLC

Horizontal Resolution
S/N (Y Signal)
Minimum Illumination
White Balance
Electronic Shutter Speed
Slow Shutter (Sense-Up)
Gain Control
2D.3DNR
WDR
Motion Detection
Privacy
Mirror
Sharpness
Day/Night switch

IR OPT (SMART- IR, ATR WD-EX)

Digital E-ZOOM
DIS

DEFECT ADJ

Communication

Language

Power
Power Consumption

Lens

Storage Temperature
Operating Temperature
Dimension
Weight

- 23 -

CAMERA DIMENSION

1) WDRB10H

2) WDRD10H

3.94”dia

8.27”

4.72”

3.94”dia

5.12”dia

5.12”dia

3.94”dia

4.49”

1.61”

- 24 -

CAMERA DIMENSION

3) WDRD20H

4) WDRB11H

5.12”dia

5.12”dia

3.94”dia

3.94”

1.61”

3.46”

4.01”

3.11”

3.89” dia

11.02”

5.90”

5.03”

10.51”

- 25 -

CAMERA DIMENSION

5) WDRD11H

6) WDRD21H / WDRD21HW

1.25”

4.09”

5.51” dia

4.60” dia

5.51” dia

5.12”dia

5.12”dia

3.94”dia

3.94”

1.61”

- 26 -

FEATURES

2D.3DNR Filtering Method of Newly Advanced DNR Function

Newly developed 2D filtering enhances Digital Noise reduction at low light levels. 2D
Filtering of the Video Signal Optimises the Signal to Noise ratio.

High Resolution

The combination of a Sony Super HAD CCD image sensor and DNR DSP provides an
excellent resolution of 700 TV lines.

Wide Dynamic Range

WDR is a powerful and ultra advanced technology that captures cleaner and superior
high resolution pictures even where the images appear dark because there is a strong
back light present.

High Spotlight BLC Function

Users Can Adjust and Select the Special Required Area to Observe the Target Object
Under the Strong Spots of Light Exist.

Illumination

With an Incredibly minimum illumination of 0.01Lux, the sensor can capture good
images even in extremely low light conditions. Noise is significantly reduced by the
ultra advanced DNR (Digital Noise Reduction) technology.

Additional Functions

OSD - On Screen Display menu with multi-Language support.
Privacy Masking -15 zones, Motion - 4 zones.

- 27 -

Menu items can be selected by using the OSD buttons of the camera

1. Press the Set Up button.

* The Set Up menu will be displayed on the monitor.

2. Move and select the required function using the Up and Down button.

* Move the arrow indicator Up or Down to select the desired feature by pressing

the Up or Down button.

Menu Set Up (SPECO TECH 1/3)

SPECO TECH 1/3

SPECO TECH 1/3

LENS

SHUTTER/AGC
PICT ADJUST
WHITE BAL
WDR
2D.3DNR

NEXT
EXIT

LENS

SHUTTER/AGC
PICT ADJUST
WHITE BAL
WDR
2D.3DNR

NEXT
EXIT

AUTO

AUTO

ANTI CR

SAVE ALL

AUTO

AUTO

ANTI CR

SAVE ALL

- 28 -

3. Change menu settings using the Left or Right button.

* Available values or Status are displayed by pressing the Left or Right buttons.

Press the button until desired value / status is displayed.

4. After Changing the setting move the arrow indicator to EXIT and press the

SET button to EXIT.

This function is used to set the mechanical iris of the lens.

1. Move the arrow indicator to Lens using the Up and Down buttons on the Set Up menu screen.

2. Select the mechanical iris type by pressing the left or right button between Manual and Auto.

NOTE

* Move to the available submenu by moving arrow to desired feature.

Lens

SPECO TECH 1/3

LENS

SHUTTER/AGC
PICT ADJUST
WHITE BAL
WDR
2D.3DNR

NEXT
EXIT

AUTO

AUTO

ANTI CR

SAVE ALL

- 29 -

3. Set DC or Video by selecting type on the Auto Iris screen.

4. Press the RETURN to return to the SETUP menu.

This function is used to select Automatic or Manual shutter speed control.

1. On the Set Up menu screen select SHUTTER/AGC by using the Up or Down button.

2. Select the desired shutter mode by pressing the Left or Right button.

Shutter/AGC

AUTO IRIS

TYPE
MODE
SPEED
MODE
RETURN

DC
AUTO
075
OUTDOOR

SPECO TECH 1/3

LENS

SHUTTER/AGC

PICT ADJUST
WHITE BAL
WDR
2D.3DNR

NEXT
EXIT

AUTO

AUTO

ANTI CR

SAVE ALL

- 30 -

AUTO SETUP

SHUT+AUTO IRIS
126

AGC->SLOW1

-----

HIGH LUMINANCE

* MODE : Shutter is fixed at 1/60, 1/50 and average brightness maintains

* BRIGHTNESS : Adjust the brightness level 0~255 by pressing the left or the right button.

LOW LUMINANCE

* MODE

- OFF : AGC and SLOW(SENSE-UP) OFF

- AGC : AGC ON and SLOW(SENSE-UP) OFF.

Enter the LOW LUMINANCE SETUP and adjust GAIN level by pressing the left or the right button.

- SLOW(SENS-UP) : SLOW(SENSE-UP) ON and AGC OFF.

Enter the LOW LUMINANCE SETUP and adjust SLOW(SENSE-UP) level by pressing the left or the right

button.

- AGC->SLOW1(SENS-UP) : AGC and SLOW(SENSE-UP) ON.

When over the selected AGC MAX level, SLOW(SENSE-UP) turns on.

- AGC->SLOW2(SENS-UP) : AGC and SLOW(SENSE-UP) ON.

When over the selected AGCMIN level, SLOW(SENSE-UP) turns on.

- SLOW(SENS-UP)->AGC : AGC and SLOW(SENSE-UP) ON.

When over the selected SLOW(SENSE-UP) level, AGC turns on.

* BRIGHTNESS : Adjust the bright level x0.25 , x0.5 , x0.75 , x1.0 by pressing the left or the right button.

* RETURN : Move previous page.

HIGH LUMINANCE
MODE
BRIGHTNESS
LOW LUMINANCE
MODE
BRIGHTNESS
RETURN

- 31 -

MANUAL SETUP

MODE
SHUT
AGC

RETURN

SHUT
1/60(S)
6(DB)

* SHUTTER : Adjust the shutter level 1/60, FLK, 1/100, 1/250, 1/500, 1/1000,1/2000, 1/4000, 1/10000 (S)

adjust the red color GAIN by pressing the left or the right button.

* Adjust the AGC level 6, 12, 18, 24, 30, 36, 42, 44.8, (DB) by pressing the left or the right button.

* RETURN : Move previous page.

NOTE

* AGC (Auto Gain Control)

A higher gain increases brightness but also increases noise.

- 32 -

PICT Adjust

Move the cursor to PICT ADJUST press the SET button.

SPECO TECH 1/3

LENS
SHUTTER/AGC

PICT ADJUST

WHITE BAL
WDR
2D.3DNR

NEXT
EXIT

AUTO
AUTO

ANTI CR

SAVE ALL

PICT ADJUST

MIRROR
CONTRAST
SHARPNESS
HUE
R-GAIN
B-GAIN
RETURN

OFF
039
008
050
158
158

* MIRROR : Select Off, Flip Vertical, Flip Horizon, Flip Horizon and Vertical by pressing the left or the right

button.

* CONTRAST : Adjust the contrast level 0~063 by pressing the left or the right button.

* SHARPNESS : Adjust the sharpness level 0~015 by pressing the left or the right button.

* HUE : Adjust the color level 0~100 - RED, GREEN, BLUE, YELLOW, CYAN, MAGENTA

* R-GAIN : Adjust the red color GAIN 0~255 by pressing the left or the right button.

- 33 -

* B-GAIN : Adjust the blue color GAIN 0~255 by pressing the left or the right button.

* RETURN : Move previous page.

White Balance

This function is used to set the white balance operation mode.

1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down button.

2. Select the desired mode by using the Left or Right button.

SPECO TECH 1/3

LENS
SHUTTER/AGC
PICT ADJUST

WHITE BAL

WDR
2D.3DNR

NEXT
EXIT

AUTO
AUTO

ANTI CR

SAVE ALL

ATW SETUP

SPEED

DELAY CNT

ATW FRAME

ENVIRONMENT

RETURN

005

005

x1.5

INDOOR

- 34 -

* ATW : Auto tracking white, normal environment setting under fluorescent lamp or outdoors.

- SPEED : Select the start point of auto tracking speed and time by pressing the left or the right button.

- DELAY CNT : Select the start point of Auto tracking speed and time by pressing the left or the right button.

- ATW FRAME : Set up the frame megnification by pressing the left or the right button.

- ENVIRONMENT : It improves color temperature chase accuracy in accordance with environmental set-up.

Select the environment by pressing the left or the right button.

- RETURN : Select return to save the changes in the ATW menu and return to the SETUP menu.

* PUSH : Regardless of subject condition, adjust white balance. Always control locking mode with full-in

frame, white color as set point.

* USER1 WB: The gain values for the outdoor fixed mode are used as the adjustment items of USER1 on the

internal OSD menu.

* USER2 WB: The gain values for the fluorescent light fixed mode are used as the adjustment items of

USER2 on the internal OSD menu.

* ANTI CR : COLOR rolling control

* MANUAL WB: The B and R gain values for manual WB are set on this screen.

- LEVEL UP : Induce change to high color temperature side.

- LEVEL DOWN : Induce change to low color temperature side.

* PRESET : Reset the adjusted color temperature side.

* PUSH LOCK : To get the most suitable status at current lighting environment, push the SET button while

camera focuses on a white plain paper.

- 35 -

* WDR : The wide dynamic range (WDR) function of a camera is intended to provide clear images even

under back light circumstances where intensity of illumination can vary excessively, namely when there are

both very bright and very dark areas simultaneously in the field of view of the camera.

WDR(Wide Dynamic Range)

SPECO TECH 1/3

LENS
SHUTTER/AGC
PICT ADJUST
WHITE BAL

WDR

2D.3DNR

NEXT
EXIT

AUTO
AUTO

ANTI CR

SAVE ALL

WDR SETUP

MODE

CONTRAST

RETURN

ON

MIDHIGH

* MODE : Adjust WDR function ON or OFF.

* CONTRAST : Increase bright illuminance and dark illuminance level over average value and then control

the contrast. Select the LOW, MIDLOW, MID, MIDHIGH, HIGH by pressing the left or the right button.

* RETURN : Move previous page.

- 36 -

WDR OFF WDR ON

2DNR function does Y,C filtering and decrease noise.

The level of 3DNR noise removal mode is getting higher, noise removal effect will be good, but ghost effect

may be shown up. Select OFF, LOW , MIDLOW , MID , MIDHIGH , HIGH by pressing the left or the right

button.

2D.3DNR

SPECO TECH 1/3

LENS
SHUTTER/AGC
PICT ADJUST
WHITE BAL
WDR

2D.3DNR

NEXT
EXIT

AUTO
AUTO

ANTI CR

SAVE ALL

- 37 -

Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu.

EXIT

This function is used to save the various settings of the internal OSD menu in the EEPROM together.

SAVE ALL is always displayed on the bottom line of the top menu. Its display position cannot be changed.

SAVE ALL

Move to next page.(SETUP MENU 2/3)

NEXT

- 38 -

Menu items can be selected by using the OSD buttons of the camera

1. Press the Set Up button.

* The Set Up menu will be displayed on the monitor.

2. Move and select the required function using the Up and Down button.

* Move the arrow indicator Up or Down to select the desired feature by pressing

the Up or Down button.

Menu Set Up (SPECO TECH 2/3)

SPECO TECH 2/3

SPECO TECH 2/3

HLC/BLC

DAY/NIGHT
EZOOM
DIS
PRIVACY
MOTION DET

BACK
EXIT

HLC/BLC

DAY/NIGHT
EZOOM
DIS
PRIVACY
MOTION DET

BACK
EXIT

AUTO

OFF

OFF

NEXT
SAVE ALL

AUTO

OFF

OFF

NEXT
SAVE ALL

- 39 -

3. Change menu settings using the Left or Right button.

* Available values or Status are displayed by pressing the Left or Right buttons.

Press the button until desired value / status is displayed.

4. After Changing the setting, move the arrow indicator to EXIT and press the

SET button to EXIT.

This function is used to set the mechanical iris of the lens.

1. Move the arrow indicator to Lens using the Up and Down buttons on the Set Up menu screen.

2. Select the mechanical iris type by pressing the left or right button between Manual and Auto.

NOTE

* Move to the available submenu by moving arrow to desired feature.

HLC/BLC

SPECO TECH 2/3

HLC/BLC

DAY/NIGHT
EZOOM
DIS
PRIVACY
MOTION DET

BACK
EXIT

AUTO

OFF

OFF

NEXT
SAVE ALL

- 40 -

HLC/BLC

HLC

CLIP LEVEL

SCALE

BLC

RETURN

OFF

000

010

-----

* HLC : HLC, control and mask process for a strong light source. Select OFF, ON , AUTO by pressing the

left or the right button.

* CLIP LEVEL : Adjust the Brightness mask level by pressing the left or the right button.

* SCALE : Adjust the Brightness signal control level by pressing the left or the right button.

* BLC : Turn off or on the Back light compensation

* RETURN : Move previous page.

Picture can be displayed in either color of black and white.

1. Select DAY/NIGHT using the Up or Down button on the SETUP menu screen.

2. Select the desired mode using the Left and Right buttons.

DAY/NIGHT

SPECO TECH 2/3

HLC/BLC

DAY/NIGHT

EZOOM
DIS
PRIVACY
MOTION DET

BACK
EXIT

AUTO

OFF

OFF

NEXT
SAVE ALL

- 41 -

IR OPTIMIZER

SMART IR
LEVEL
ATR WD-EX
RETURN

CENTER
015
ON

* BURST : Adjust color signal ON/OFF in night(B/W) mode.

* DELAY CNT : Adjust the DELAY time level 0~255 for day&night switch by pressing the left or the right

button.

* DAY→NIGHT : Adjust the DAY→NIGHT switch level 0~255 by pressing the left or the right button.

* NIGHT→DAY : Adjust the NIGHT→DAY switch level 0~255 by pressing the left or the right button.

* IR OPT : If you select AUTO, SMART IR function will be applied to the whole field.

DAY&NIGHT SETUP

BURST
DELAY CNT
DAY->NIGHT
NIGHT->DAY
IR OPT
EXTON
RETURN

OFF
003
000
000
OFF
ON

SMART IR AREA

TOP
BOTTOM
LEFT
RIGHT
RETURN

046
079
085
150

- 42 -

- SMART IR : adjust the division field level by pressing the left or the right button.

TOP : 000~114 Level adjustable

BOTTOM : 000~122 Level adjustable

LEFT :000~223 Level adjustable

RIGHT : 000~239 Level adjustable

- LEVEL : Strength control level by pressing the left or the right button.

- ATR WD-EX : ATR WD-EX works only in B/W mode. (IR LED linkage)

- RETURN : Move previous page.

→ AUTO: The mode will automatically switches to COLOR in normal condition and switches to BW mode

when ambient illumination is low.

Press the SET button to set the switching time or D→N(AGC), N→D(AGC) in AUTO mode.

SMART IR ONSMART IR OFF

* EXTON : When outside signal input is worked, DAY&NIGHT is interlocked.

EXTON

DELAY CNT

POLARITY

RETURN

003

ACTIVE HIGH

- 43 -

- DELAY CNT : Adjust the DELAY time level 0~255 for day&night switch by pressing the left or the

right button.

- POLARITY : HIGH , LOW select the active high or low of outside input signal reversal

- RETURN : Move previous page.

EZOOM

SPECO TECH 2/3

HLC/BLC
DAY/NIGHT

EZOOM

DIS
PRIVACY
MOTION DET

BACK
EXIT

AUTO

OFF

OFF

NEXT
SAVE ALL

EZOOM SETUP

MAG

PAN

TILT

RETURN

000

512

256

- MAG : (x1 ~ x16) Digital Zoom

- PAN : Left and right control level 0~1023

- TILT : Up and down control level 0~511

- RETURN : Move previous page.

- 44 -

Image stabilization

DIS(Digital Image Stabilizer)

SPECO TECH 2/3

HLC/BLC
DAY/NIGHT
EZOOM

DIS

PRIVACY
MOTION DET

BACK
EXIT

AUTO

OFF

OFF

NEXT
SAVE ALL

Hide an area you want to hide on the screen.

When the PRIVACY menu screen is displayed, press the Up and Down buttons to set to PRIVACY.

PRIVACY

SPECO TECH 2/3

HLC/BLC
DAY/NIGHT
EZOOM
DIS

PRIVACY

MOTION DET

BACK
EXIT

AUTO

OFF

OFF

NEXT
SAVE ALL

- 45 -

* AREA SEL : Selects the mask frame to be adjusted.

* MODE : Adjust AREA SEL function ON or OFF.

* POSITION : PRIVACY MASK field set-up

* COLOR : Sets the colors of the mask frames.

It selects the palette values below (where m: 0-7, color setting - 1) for settings 1 to 8.

* TRANSP : Sets the transparency ratio of the mask frames.

The same transparency ratio value is set for all the mask frames.

* MOSAIC : Sets the mask frame mosaic function to ON or OFF.

OFF: Mosaic function OFF

ON: Mosaic function ON

* RETURN : Move previous page.

PRIVACY

AREA SEL
MODE
POSITION
COLOR
TRANSP
MOSAIC
RETURN

1/15
OFF

-----

-----

-----

-----

MOTION DETECTION

SPECO TECH 2/3

HLC/BLC
DAY/NIGHT
EZOOM
DIS
PRIVACY

MOTION DET

BACK
EXIT

AUTO

OFF

OFF

NEXT
SAVE ALL

- 46 -

* DETECT SENSE : Motion detection strength level 0~127 control

* BLOCK DISP : Controls the ON/OFF status of the motion detection block display.

* DETECT AREA : BLOCK field set-up

* MONITOR AREA : Sets whether to use the monitoring frames.

- AREA SEL 1/4 : Selects the monitoring frame be set.

- MODE

OFF: The monitoring frames are not used.

ON: The monitoring frames are used.

- TOP : Sets the top side of the monitoring frame selected by the AREA SEL parameter.

- BOTTOM : Sets the bottom side of the monitoring frame selected by the AREA SEL parameter.

- LEFT : Sets the left side of the monitoring frame selected by the AREA SEL parameter.

- RIGHT : Sets the right side of the monitoring frame selected by the AREA SEL parameter.

* RETURN : Move previous page.

MOTION DET

DETECT SENSE
BLOCK DISP
DETECT AREA
MONITOR AREA
RETURN

111
OFF

BACK

Move to previous page. (SETUP MENU 1/3)

- 47 -

Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu.

Move to next page.(SETUP MENU 3/3)

EXIT

NEXT

This function is used to save the various settings of the internal OSD menu in the EEPROM together.

SAVE ALL is always displayed on the bottom line of the top menu. Its display position cannot be changed.

SAVE ALL

- 48 -

Menu items can be selected by using the OSD buttons of the camera

1. Press the Set Up button.

* The Set Up menu will be displayed on the monitor.

2. Move and select the required function using the Up and Down button.

* Move the arrow indicator Up or Down to select the desired feature by pressing

the Up or Down button.

Menu Set Up (SPECO TECH 3/3)

SPECO TECH 3/3

SPECO TECH 3/3

SYCNDAY/NIGHT

CAMERA ID
LANGUAGE
DEFECT ADJ
CAMERA RESET

BACK
EXIT

SYCNDAY/NIGHT

CAMERA ID
LANGUAGE
DEFECT ADJ
CAMERA RESET

BACK
EXIT

INT

OFF
ENGLISH

SAVE ALL

INT

OFF
ENGLISH

SAVE ALL

- 49 -

To select the position where the camera ID should be displayed on the screen.

Move the cursor to POS and press the SET button.

INT (Internal Synchronisation)

SYNC

CAMERA ID

SPECO TECH 3/3

SPECO TECH 3/3

SYCNDAY/NIGHT

CAMERA ID
LANGUAGE
DEFECT ADJ
CAMERA RESET

BACK
EXIT

SYCNDAY/NIGHT

CAMERA ID

LANGUAGE
DEFECT ADJ
CAMERA RESET

BACK
EXIT

INT

OFF
ENGLISH

SAVE ALL

INT

OFF

ENGLISH

SAVE ALL

- 50 -

CAMERA ID SETUP

ABCDEFGHIJKLMNOPQRSTUV

WXYZ0123456789-!”#$%&’

()_’,￥:;<=>?@^*×＋/

←→↑↓

CLR POS

RETURN

* A - )Each user font: A selected character is registered at the position selected by the CAMERA ID cursor

when the Enter operation input is performed from the status in which the characters have been selected

using the character selection cursor. The camera ID cursor then moves one character to the right.

* ← → ↑ ↓:The camera ID cursor moves in the direction of the arrow when the Enter operation input is

performed from the status in which ←, →, ↑ or ↓ has been selected using the character selection cursor.

* CLR:The character selected by the camera ID cursor is cleared when the Enter operation input is

performed from the status in which CLR has been selected using the character selection cursor.

* POS:The display switches to the camera ID display position setting screen when the Enter operation

input is performed from the status in which POS has been selected using the character selection cursor.

On the camera ID display position setting screen, the camera ID display position is changed in real time in

response to the left, right, up or down operation input. When the Enter operation input is performed, the

display position is entered, and the display returns to the camera ID setting screen.

- 51 -

Selects the language in which to display the internal OSD menu.

The menus can be changed in real time in the selected language.

Detection ADJUSTABLE (White pixel detection and compensation mode) 64 Points compensation.

LANGUAGE

DEFECT ADJ

SPECO TECH 3/3

SPECO TECH 3/3

SYCNDAY/NIGHT
CAMERA ID

LANGUAGE

DEFECT ADJ
CAMERA RESET

BACK
EXIT

SYCNDAY/NIGHT
CAMERA ID
LANGUAGE

DEFECT ADJ

CAMERA RESET

BACK
EXIT

INT
OFF

ENGLISH

SAVE ALL

INT
OFF
ENGLISH

SAVE ALL

- 52 -

DEFECT ADJ

DETTH

DETPGAIN

START

RETURN

002

034

* DETTH : In light block situation, if the brightness value of white pixel is low, more white pixel is

detected and is high, lower white pixel is detected.

* DETPGAIN : In light block situation, while white spot is being detected, gain level set-up, level is

getting higher, more white pixel is detected.

* START : When White pixel compensation is done, SUCCESS will show up on the monitor. EX) When

more 64 POINTS are detected, ERROR will show up.

* RETURN : Move previous page.

This function initializes all the internal OSD menu settings together.

CAMERA RESET

SETUP MENU 3/3

SYCNDAY/NIGHT
CAMERA ID
LANGUAGE
DEFECT ADJ

CAMERA RESET

BACK
EXIT

INT
OFF
ENGLISH

SAVE ALL

- 53 -

Press the SET button in the EXIT menu to save the current settings and exit the SETUP menu.

Move to previous page.(SETUP MENU 2/3)

EXIT

BACK

This function is used to save the various settings of the internal OSD menu in the EEPROM together.

SAVE ALL is always displayed on the bottom line of the top menu. Its display position cannot be changed.

SAVE ALL

- 54 -

●

Trouble Shooting

PROBLEM

Nothing appears on

the screen.

☞

Check the power cable, power supply output and video

connection between the camera and monitor.

☞

Are the camera lens or the lens glass dirty?

Clean the lens / glass with a soft clean cloth.

☞

Adjust the monitor controls, as required.

☞

If the camera is facing a very strong light, change

the camera position.

☞

Adjust the lens focus.

☞

Adjust the contrast control of the monitor.

☞

If there is an intermediate device, correctly set the 75Ω/Hi-z.

☞

Has MOTION DET been set to ON in the menu?

☞

Has MD AREA been properly dened?

☞

Check that the AGC setting in the EXPOSURE menu is’t set to OFF.

☞

Check the EXPOSURE menu and make sure SHUTTER is set to------.

☞

Make sure that the camera isn’t facing direct sunlight or

uorescent lighting. If necessary,change the camera position.

☞

Check the settings in WHITE BALANCE menu.

☞

Check the camera is correctly connected to an appropriate

regulated power source.

The image on the

screen is dim.

The camera is not

working properly
and the surface of
the camera is hot.

The image on the

screen is dark.

Motion Detection

is not activated.

The color of the

picture is not correct.

The image on the

screen ickers.

The SENS-UP does

not work.

POSSIBLE CAUSE

- 55 -

- 56 -

- MEMO -

- 57 -

- MEMO -

- 58 -

- MEMO -

200 New Highway

Amityville, NY 11701

631-957-8700

1 800 645 5516

www.specotech.com