Speco 16WM, 4WM, 8WM, DVR4WM, DVR8WM Setup Manual
...
Speco Technologies is constantly developing product improvements. We reserve the right to modify product
design and specifications without notice and without incurring any obligation. Rev. 11/10/09.
DVR4WM/8WM/16WM
Setup Guide
Speco Technologies
200 New Highway
Amityville, NY 11701
800-645-5516
www.specotech.com
2
DVR4WM/8WM/16WM
Setup Guide
Package Content
Inspect the DVR’s packaging. Make sure that the DVR-4WM/8WM/16WM is packed properly.
Remove all items from the box and make sure it contains the following items.
DVR-4WM/8WM/16WM
Remote
Control
Power
Adaptor
Power Cord
Quick
Guide
Internal Connections
1
LAN 10/100M
(RJ-45)
The DVR is capable of networking. Once the unit is connected to the LAN network, users can
remotely access the DVR through the remote software and SpecoRemote on a PC.
2
USB Port
The USB 2.0 port allows users to connect an external USB device to the unit, such as a USB
ThumbDrive or Flashdrive.
3
Alarm I/O &
RS-485
The DVR provides alarm I/O and RS485 ports that offer users the flexibility required to connect
the DVR to other devices.
4
Main
MonitorBNC
The DVR can connect to a monitor via a BNC connector.
5
Call Monitor
(BNC)
The call monitor is used to display full screen video of all installed cameras in sequence. The
BNC Call Monitor connector allows users to connect the DVR with an optional call monitor.
6
Video In
(BNC)
A group of BNC connectors is provided for video input streams from installed cameras.
1 3 4 5 6
2 7 8 9 10
3
7
Main Monitor
Audio Out
Main Monitor Audio Out RCA connector is provided for the DVR to connect an audio output
device (e.g. an amplified speaker).
8
Call Monitor
Audio Out
Call Monitor Audio Out RCA connector is provided for the DVR to connect an audio output
device (e.g. an amplified speaker).
9
Audio In
Audio In connectors are for the DVR to connect audio source devices. For DVR-4WM, 4 RCA
Audio In connectors will be provided; whereas for DVR-8WM and DVR-16WM, a D-Sub Audio
In connector is provided.
10
Power Jack
The DVR has a free voltage DC power connection jack. Please connect the power supply
adapter shipped with the unit.
4
Pin Definition of Alarm I/O & RS-485, and Audio In
Alarm I/O & RS-485:
DVR-4WM:
Pin Definition Pin Definition Pin Definition Pin Definition
1
Alarm Out Open
5
Alarm In 1
9
Alarm Out Close
13
GND
2
Alarm Out COM
6
Alarm In 2
10
GND
14
GND
3
RS485 D+
7
Alarm In 3
11
GND
15
GND
4
RS485 D−
8
Alarm In 4
12
GND
15pin D-sub connector I/O cable for 4TL: Speco # DVR4TLALMCBL
DVR-8WM & DVR-16WM:
Pin Definition Pin Definition Pin Definition
1
Alarm Out Open
10
Alarm In 5
19
Alarm In 10
(DVR-16WM)
2
Alarm Out COM
11
Alarm In 6
20
Alarm In 11
(DVR-16WM)
3
RS485 D+
12
Alarm In 7
21
Alarm In 12
(DVR-16WM)
4
RS485 D−
13
Alarm In 8
22
Alarm In 13
(DVR-16WM)
5
Reserved
14
Alarm Out Close
23
Alarm In 14
(DVR-16WM)
6
Alarm In 1
15
Reserved
24
Alarm In 15
(DVR-16WM)
7
Alarm In 2
16
Reserved
25
Alarm In 16
(DVR-16WM)
8
Alarm In 3
17
Reserved
9
Alarm In 4
18
Alarm In 9 (DVR-16WM)
25p D-sub I/O cable for 8/16TL: Speco # DVR816TLALMCBL
Audio In (DVR-8WM & DVR-16WM only):
Pin Definition Pin Definition Pin Definition
1
Audio 1
10
GND
19
Audio 12 (DVR-16WM)
2
Audio 3
11
GND
20
Audio 14 (DVR-16WM)
3
Audio 5
12
GND
21
Audio 16 (DVR-16WM)
4
Audio 7
13
Reserved
22
GND
5
Audio 9 (DVR-16WM)
14
Audio 2
23
GND
6
Audio 11 (DVR-16WM)
15
Audio 4
24
GND
7
Audio 13 (DVR-16WM)
16
Audio 6
25
Reserved
8
Audio 15 (DVR-16WM)
17
Audio 8
9
GND
18
Audio 10 (DVR-16WM)
25p D-sub Audio cable for 8/16TL: Speco # DVR816TLAUDCBL
Power On the DVR
Please follow the proper power on procedures to avoid damaging the DVR.
• Connect all necessary components, e.g. monitor and cameras, before powering the DVR.
• Check the type of power source before connecting the power adaptor to the DVR. The
acceptable power input is between AC110V ~ AC240V.
Loading...