Specktron SIMPLE TOUCH TDX SERIES Software Manual

13
24
25
25
Contents
Safety Instructions
Connections and Settings
Menu Operation
Maintenance
Installation
Simple troubleshooting
Safety Instructions
Before using the machine, please read the instructions carefully and keep the manual safe for future review .
Do not put the machine on places that are unstable, easy to tilt and fall.
Do not put the machine on places with direct sunlight, or places near hot objects such as
Do not put the machine in damp places or places with liquid drops and splash. Do not insert any item inside the machine
Placement
Power Supply
Screen
Range of Visibility
Temperature
Humidity
Ventilation
Headphones
Standby
Battery
Do not use the machine near equipment with strong radiation
Do not place heavy objects on the machine.
Please check and make sure compatibility between the voltage value on nameplate and the main power supply voltage
In case of thunderstorm and lightning, please unplug the power cord and antenna plug.
When the device is not in use for long periods of time, please unplug the device.
Please prevent power cord from physical or mechanical damage.
Please use special power cord, and do not modify and extend power cord.
Please check and make sure that the AC power is properly ground.
When writing on the screen, please do not use hard or sharp objects instead of the writing pen. When it needs cleaning, please unplug the power plug first.
Please use soft dust-free dry cloth to wipe the screen.
Do not use water and spray cleaner to clean the machine.
Please contact service center for cleaning of internal machine. Do not use the display on high brightness for long periods of time.
The best distance between eyes of viewer and listener and screen is 5 to 7 times of screen diagonal.
The best viewing angle between eyes of viewer and listener and screen is within 176 degrees up and down, left and right.
Do not place the machine near electric radiators or heating units. When moving the unit from extreme cold temperatures to extreme hot temperatures, keep unit off for long period of time
Do not expose the machine to rain or wet places. .
Please make sure the indoor storage area is dry and cool, machine normal humidity is 10-90%, storage humidity is 10-95%.
Please put the machine in well ventilated places and ensure the machine has good heat dissipation. Make sure ventilation of spaces 10 cm on the left, right side and back , 20 cm on the top.
Avoid using the headphones of high sound for long periods of time. .
If external earphone is needed, please turn down machine volume in advance.
The standby button on the front of machine body will not completely shut off the machine, but
Dispose of used batteries properly.󰾡
Keep batteries out of the reach of children and avoid contact with water.
Machine's normal working temperature is 0 ~ 40℃,storage temperature is -20~60
Statement
This product is Level 4 product, and in the living environment, this product may cause radio interference In this case, the user may be required to take practical measures to its interference.
electric heater or other sources of heat and strong light source.
value.
before powering it on again.
only allows the machine in standby status.
USB cable, touch pen,DVD, AV cable
1) Accessories:
Installation
Quick Start Guide
Touch pen
Remote control
Power Cord
USB
DVD
VGA Cable Cable
1 Contents
Connecting and Setting
Installation
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
Headphone Cable
AV Cable
Quick start guide, remote control, batteries, power cord, VGA cable, headphone cable,
Batteries
Charging Cable
3 Control Panel
2 Installation
1). Installation Instruction for installation of foot stool.Stand
2).Stand (optional) shall be subject to actual article.
3).Mount (optional) shall be subject to actual article.
2).Check Wall Installation Instruction for installation of wall hanging.Mount
Connecting and Setting
Installation
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
HOME button: back to home page
Return button: return to previous level menu
Menu button: call up function menu
Volume down button: turn down volume
Built-in computer USB interface
USB interface of Android system, which can access storage device to play
Receiving remote control signal, and do not place any objects to block
Volume up button: turn up volume
Items Function description
media files
remote control receiving
Remote contr ol signal
receiver
Tap to enter Energ ySaving mode Press at least 2 s econ ds to enter sta ndby mode
1).Check
PC
PC
4 Terminal Interface
Connecting and Setting
Installation
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
14
NOTE: In case of no built-in computer, it does not includes interface 14,15,16,17,18,19,20,21and 22.
Items Function des cription
Conn ect U SB d evi ces suc h as mobi le ha rd d isk , U disk, U SB ke yb oar d and mo use , US B dri ves, et c
High -de fi nit ion mul timed ia in te rfa ce sign al in pu t, co nnect t o PC (per son al c omp uter) w ith HDM I out pu t, se t-top b ox, o r ot her v ideo devi ce ca n al so re alize t ouch fu nct io n (HD MI3 can r eal iz e MHL funct ion
Conn ect ed t o dis play de vices w ith V GA in put f uncti on
Exte rna l co mpu ter aud io inpu t
Exte rna l co mpu ter ima ge inpu t
Exte rna l co mpu ter tou ch sign al in pu t. De fault t ouc h fu nct ion is av ail ab le unde r int er nal c omput er, when c onn ectin g exter nal c om put er, besi des conn ect in g ext ernal c omput er VG A and a udi o signa ls, e xt ern al comp ute r' s USB p ort nee ds to be co nne ct ed to t he equi pme nt . Und er the co ndi ti on th at driv er is ins tal le d, ex terna l com pu ter c an be tou ch cont rol le d thr ough th e equip men t (t ouc h funct ion i s ef fe cti ve in PC, VGA and H DMI cha nne l by defa ult)
Comp osi te v ide o and aud io inpu t
Coax ial o ut put
WAN i nterf ace , co nne cting R J45 t er min als
Seri al in te rfa ce, use d for mut ual t ra nsf er of dat a bet we en de vices
Conn ect ed t o dev ice wit h headp hon e input f uncti on
Powe r swi tc h, to o pen and s hut dow n AC pow er s upp ly “ ”is ON , “ ”is OFF.
AC pow er in pu t, co nnect ing AC pow er su pply
WIFI a ntenn a int er fac e
Conn ect ed t o dev ice wit h headp hon e input f uncti on
Conn ect t o de vic e with mi croph one v oi ce co llect ion (use d for r ec ord ing fun ction )
Conn ect ed t o dis play de vice wi th VG A inp ut fu nctio n
Netw ork i nt erf ace, co nnect ing R J4 5 por t to conn ect t o th e Int ernet
HDM I
USB 3. 0 int er fac e to c onn ect USB d evi ce s, su ch as mob ile h ar d dis k, U disk , USB key boa rd and mo use, US B dri ve s, et c
USB 2. 0 int er fac e to c onn ect USB d evi ce s, su ch as mob ile h ar d dis k, U disk , USB key boa rd and mo use, US B dri ve s, et c
HDMI
Conn ect ed t o dev ice wit h Displ ayP or t inp ut func tio n
Conn ect ed t o dev ice wit h HDMI in put f un cti on
14
HDM I4(4K 2K)
d
HDMI4 can realize 4K2K function. HDMI4 is on TDX-84 only )
Connecting and Setting
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
Installation
5 Remote control
1). Remote control button instruction
Ba c k
F1 - F1 2 :
Ho m e
Connecting and Setting
Installation
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
Detailed function description of remote control buttons
: Pres s thi s bu tto n to e nte r stand by wh en p owe r is on; Cl ick t hi s but ton to sw itc h on
:
:
:
:
:
Mute s wit ch
Buil t-i n co mpu ter Win dows ke y
:
:
:
:
:
in sta ndb y co ndi tion
Buil t-i n co mpu ter Spa ce key
Buil t-i n co mpu ter spa cebar Al t + Tab
Buil t-i n co mpu ter pro gram wi ndo w cl ose b utton
Numeric keys:
TV dig ita l ch ann els inp ut keys
Disp lay c ha nne l infor matio n
TV cha nne l re tur n key
Inpu t sig na l sou rce sel ectio n key, cho ose diffe ren t so urc ed acco rdi ng t o nee d
Andr oid s ys tem m ain scr een but ton
TV OSD m enu but ton , pr ess t his but ton t o po p up TV's O SD menu
Red:
Green:
Yellow:
Blue:
TV cha nne l fu nct ion but ton
TV cha nne l fu nct ion but ton
TV cha nne l fu nct ion but ton
TV cha nne l fu nct ion but ton
:
:
:
:
:
:
:
:
:
:
:
:
:
One ke y for bla nk sc reen
Back spa ce k ey
Dire cti on k ey, pres s this bu tto n fo r upw ards se lecti on
Dire cti on k ey, pres s this bu tto n fo r lef t se lec tion
Dire cti on k ey, pres s this bu tto n fo r rig ht sele ction
Dire cti on k ey, pres s this bu tto n fo r dow nward s selec tio n
conf irm at ion k ey, press th is ke y to c onf irm sel ectio n sta te
Quic kly s ta rt wr it ing s oftwa re, s el ect w ritin g pen q ui ckl y if soft war e is s tar ted.
Retu rn ke y
Buil t-i n co mpu ter pag e (prev iou s pa ge)
Buil t-i n co mpu ter pag e (next p age )
Chan nel s wi tch k ey
Volum e swi tc h key
Buil t-i n co mpu ter F1 - F1 2 funct ion k ey s
NOTE: In case of no built-in computer, all function keys related with computer are regarded as no operating functions
Install Batteries
1 Open back cover of battery component on the back of remote control
2 Install AAA type battery according to the corresponding electrode, make sure battery positive and negative pole are correct ("+"to"+", "-" to "-"), please do not mix using old and new batteries
3 After battery is installed, close the back cover of battery components, and make the following clip buckled to the bottom
Range of remote control
2).Remote control instruction
Remote control can work normally within the range of 8 meters distance, 30 degrees left and right
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
Connecting and Setting
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
Installation
from the remote control receiver; in order to protect environment, please dispose waste battery into recycling box.
Connection and Setting
For the safety of you and the machine, please do not connect any power plug before connection
1. External Computer and Touch Connection
NOTE:
External computer input, equipment's best resolution is 1920 x1080
External computer can also connect to the equipment through the HDMI cable
Recommended computer configuration:
2.0GBHZ Processor, 1GB Memory  More than 256 color display card
1GB Available Hard Drive
VGA-OUT/HDMI-OUTAudio-OUTUSB Interface
Support Resolution 800*600,1024*768
(5)Press key, and the equipment is powered on.
(6)Press the INPUT key to switch to VGA channel.
(3)After connection is completed, plug in power cord, and switch POWER to On.
(1)Use VGA line to connect to VGA output port of external computer, and meanwhile use headphone audio line to connect to external computer audio output interface.
(2)Use USB line to connect to external computer USB port.
(4)Start external computer.
Connecting and Setting
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
Installation
Audio Cable VGA Cable
USB Cable
Computer
Connecting and Setting
Installation
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
Video Game
Set-top
Satellite TV receiver
Video recorder
Camera
DVD
AV cable
2. Audio and video equipment
(1).Use AV audio and video lines to connect audio and video equipments with AV output
(yellow for video, red for right sound channel, and white for left sound channel)
(2).After line connection, plug in power cord, and switch power On
(3).Press to turn equipment on
(4).Press INPUT key to switch to CVBS port
HDMI cable
DVD Disc Player
(1).Use HDMI line to connect audio and video equipment with HDMI output
(2).After line connection, plug in power cord, and switch power On
(3).Press to turn equipment on
(4).Press INPUT key to switch to HDMI port (HDMI3 channel can realize MHL function
/HDMI4(4K2 K)
HDM I4(4K 2K)
HDMI4 channel can realize 4K2K function. HDMI4 is on TDX-84 only)
3. Coaxial connection
Audio line
Power amplif ier/stereo equi pmen t
(1).Use coaxial line to connect audio device with coaxial input
(2). After line connection, plug in power cord, and switch power On
(3).Press to turn equipment on
4. Video output connection
1). VGA output connection
(1).Use VGA line to connect display devices with VGA input, and use headphone line to
(2). After line connection, plug in power cord, and switch power On
(3).Press to turn equipment on
Computer
connect sound output
(4).Press INPUT key to switch to PC port
(5).Set internal computer as VGA output or multi-screen display
TV
Note: VGA OUT of TV outputs VGA IN graphics and sound
Connecting and Setting
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
Installation
Projector
TV
Computer
HDM I
Internet
Connecting and Setting
Installation
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
8. WAN Connection
Network cabl e
5. USB Equipment connection
6. Network cable connection
7. Microphone connection
USB Equipmen t
Router and oth er network sign al output
USB line
Network cabl e
Audio line
HDM I
11. USB Equipment connection
Serial port li ne
Computer
After using serial port line to connect central control equipment and machine, certain function of the machine can be controlled via central control equipment, such as: machine ON/off, and adjustment of sound volume, etc
PC operations
1.In case that TV is on and the computer is not started, press INPUT key to switch PC channel,
2.When it is on, hold on POWER key for 2 seconds, click to select "Confirm" in the pop-up reminder menu to turn off TV and computer together.
3.Under PC channel when it is on, touch to select "WINDOWS" button on the lower left of desktop or press "WINDOWS" key on remote control, and then select "power off" item, to turn off computer when not turning off TV.
Connecting and Setting
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
Installation
then the computer .turned on
A
1313
Menu Operation
One Touch menu operation
Call up method
Take middle point position on the bottom of display screen as starting point, use touch pen to drag towards screen center position to call up touch menu, as shown below.
Note: "Touch A Method" mentioned in this manual to call up touch menu method is shown above.
Setting menu
Input setting
Press INPUT button on remote control or via touch A method to call up Input Setting menu;
Press button on remote control to select the channel you need;
Press the Enter button on remote control or directly click with touch pen to confirm selected input channel;
Press return key on remote control, or click blank area outside menu with touch pen to exit menu.
Note: “ ”symbol represents that this channel has been connected to a signal
Inpu t Ligh t Volum e More
Conn ectin g and S et tin g
Menu Operation
Troub lesho oti ng
Care a nd Ma in ten an ce
Disp lay Mod e
Inst allat ion
Inpu t
14
Conn ectin g and S et tin g
Menu Operation
Troub lesho oti ng
Care a nd Ma in ten an ce
Disp lay Mod e
Inst allat ion
Brightness Setting
Press INPUT button on remote control or via touch A method to call up Input Setting menu;
Press button on remote control or directly click “Light”icon with touch pen to enter Brightness Setting menu;
Press button on remote control or drag brightness adjustment progress bar with touch pen to adjust brightness;
Press return key on remote control, or click blank area outside menu with touch pen to exit menu.
Volume setting
Press INPUT button on remote control or via touch A method to call up Input Setting menu;
Press button on remote control or directly click “Volume”icon with touch pen to enter Volume Setting menu;
Press button on remote control or directly drag volume adjustment progress bar with touch pen to adjust volume;
Press < Mute > button on remote control or directly click mute icon below "More Settings" with touching pen to open or close mute state;
Press return key on remote control, or click blank area outside menu with touch pen to exit menu.
Inpu t Ligh t Volum e More
Inpu t Ligh t Volum e More
Bac kligh t
Volu me
Sound
Soun d Mod e
Standard
Under Android c hannel, press INP UT bu tton on remot e cont rol or via touch A method t o call up Setting men u;
Press button o n remo te control or d irec tly click “More Set ting s”icon with t ouch p en to enter advanc ed setting menu
Press button o n remo te control or click d irectly with touc h pen to s elect each op tion ; Press return k ey on re mote contro l or fro nt panel of equ ipme nt to exit menu.
15
Sound
Adjust the vol ume of e quipment .
Dispaly
Adjust equip ment display brig htne ss/system w allp aper and system fon t size.
Apps
Display each a pplication in Andr oid system memory.
Language&input
Adjust displ ay language and inp ut met hod setting s of Andr oid system.
Conn ectin g and S et tin g
Menu Operation
Troub lesho oti ng
Care a nd Ma in ten an ce
Disp lay Mod e
Inst allat ion
More Settings (advanced setting)
1. Android channel
Sou nd
Dis play
App s
Lan guage &inpu t
Dat e&tim e
Abo ut
Eth ernet c hechi ng
Sto rage
Ethernet checking
View the curr ent ne twork conne ctio n status and the netw ork parameters of t he dev ice .
Storage
Each memory us age of display devi ce.
Date&time
Under Android s ystem, set system t ime an d format (time can be a utomatically ob tain ed or manually se t).
About device
Display Andro id system softwar e vers ion informa tion .
device
0
Bala nce
Movie Classroom Meeting
Custom
16
Conn ectin g and S et tin g
Menu Operation
Troub lesho oti ng
Care a nd Ma in ten an ce
Disp lay Mod e
Inst allat ion
Under VGA chann el, press INPUT bu tton o n remote control or v ia touch A method to call up setting menu ;
Press button o n remo te control or click d irectly with touc h pen to s elect and adjust each op tion;
Press return k ey on re mote contro l, or cl ick blank are a outs ide menu with touch p en to exit menu.
H position
Press button o n remo te control or d irec tly drag icon with to uch pe n to adjust hor izon tal position of im age;
Press button o n remo te control un der se tting menu or d irec tly click“More Se ttin gs”icon wit h touch pen or dir ectly press Menu on r emot e control und er VGA ch annel to enter adva nced setting menu ;
V Position
Press button o n remo te control or d irec tly drag icon with to uch pen to adjust ver tica l position of im age;
Phase
Press button o n remo te control or d irec tly drag icon with to uch pe n to adjust pha se position of im age;
Clock
Press button o n remo te control or d irec tly drag icon with to uch pe n to adjust clo ck of im age;
Zoom
Press button o n remo te control or p ress E nter button or dire ctly c lick icon wit h touc h pen to switch image d isplay ratio;
Auto Adjust
Press button o n remo te control or d irec tly click icon with t ouch p en to automat ical ly adjust horizontal , vertical positi on/ ph ase and clock o f imag e;
2. VGA Channel
H Position
V Position
Phase
Clock
Zoom
Auto Adjust
17
Conn ectin g and S et tin g
Menu Operation
Troub lesho oti ng
Care a nd Ma in ten an ce
Disp lay Mod e
Inst allat ion
Under channe ls other than Androi d, pre ss Menu butto n on rem ote control o r via to uch A method to call u p sett ing menu;
Press button o n remo te control or d irec tly click“More Se ttings”icon wit h touc h pen or directly pre ss Men u on remote con trol t o enter advan ced se tting menu;
Press button o n remo te control or click d irectly with touc h pen to s elect and adjust each op tion;
Press return k ey on re mote contro l, or cl ick blank are a outs ide menu with touch p en to ex it menu.
Brightness
Press button o n remo te control or d irec tly drag icon with to uch pen to adjust bri ghtn ess of image.
Contrast
Press button o n remo te control or d irec tly drag icon with to uch pen to adjust con tras t of image.
Tone
Press button o n remo te control or d irec tly drag icon with to uch pen to adjust ton e of ima ge.
Sharpness
Press button o n remo te control or d irec tly drag icon with to uch pe n to adjust sha rpne ss of image.
Color Temp
Press button o n remo te control or d irec tly drag icon with to uch pen to adjust col or temperatur e of ima ge (Cool colo r/wa rm color/au toma tic).
NR
Press button o n remo te control or d irec tly drag icon with to uch pe n to open or turn o ff no ise reduction fu ncti on.
Note: diffe rent o ptions in differ ent channels can' t be adj usted, plea se sel ect accordi ng to ac tual situation.
3. Screen Setting
Brightness
Contrast
Tone
Color Temp
NR
Sharpness
Col d War m Stan dard
18
Conn ectin g and S et tin g
Menu Operation
Troub lesho oti ng
Care a nd Ma in ten an ce
Disp lay Mod e
Inst allat ion
Annotation m enu icon
Return icon
Main interfa ce icon
Annotation b rush icon
Whiteboard software
Screenshot i con
Close icon
Resource bro wse icon
4. Annotation menu
Fig.2
Pop up sub-men u
Click to retur n to pre vious opera tion i nterface
Click to retur n to mai n interface o f Andro id system
Click to make an notation in the pic ture , click again to change brus h color
Click to enter whiteboard software Screen image w ill be saved automa tica lly when exit ing
whiteboard s oftware.
Storage loca tion: resource br owse /blackboa rd wri ting
Click to open re sources browse me nu
Click for scre ensh ot of current a nnot ation image Screenshot s tora ge location : reso urce browse/bla ckboard writing
Click to close a nnotation menu
Place two fing ers on the screen(a bout 2 0~50m ) and stay m ore th an two second s under
any chann el to ca ll up annotation me nu (Figure 1);
In annotatio n, menu is shown in Fig ure 2.
In annotatio n stat e, input only b y touc h pen, and remo te con trol cannot perfo rm notation operation
s unde
Fig.1
19
Conn ectin g and S et tin g
Menu Operation
Troub lesho oti ng
Care a nd Ma in ten an ce
Disp lay Mod e
Inst allat ion
Two Android System Interface
Switch to Andro id channel to displ ay mai n interface a s show a bove;
Press key on rem ote co ntrol to sele ct ico n below, and press Ent er key to enter correspond ing program, or dir ectl y click icon wi th tou ching pen to en ter pr ogram;
In any program , pres s Home button o n remo te control or < Home k ey> on front frame of equipment to r eturn to the main int erfa ce.
SimpleTouch
Finder
Browser
PIP
ScreenSettings
Apps
SimpleTouch
Bac kgrou nd
Menu icon
Picture in pic ture i con
Exit icon
Main Interface
SimpleTouch
Finde r
Brows er PIP DisplaySettings Apps
Enter flat pan el wri ting softwa re, se e page 19-20
Enter androi d system resource b rows er, see page 20
Enter intern et pag e, see page 21
Enter pictur e-in -picture im age, s ee page 21
Enter settin g menu p age, see page 1 3
Enter Android s ystem applicati on man agement pag e, see p age 22
Sav e
Click to pop up su b-menu (change ba ckgr ound/save )
Click to exit Wh iteb oard softwa re
Click to pop up pi cture in picture in terf ace, see page 2 1
20
Conn ectin g and S et tin g
Menu Operation
Troub lesho oti ng
Care a nd Ma in ten an ce
Disp lay Mod e
Inst allat ion
Select icon
Brush icon
Eraser icon
Image import i con
Cancel icon
Restore icon
Page icon
Add page icon
Display file s in Android system me mory a nd Android sys tem ex ternal storage.
1
2
3
4
5
1, Storage devi ce display
2, Menu/exit me nu
3, File type menu6Documents: O FFIC E type files
Blackboard w riting: images st ored b y Whiteboar d and im ages stored by annotati on scr eenshots
Video: audi o and vi deo type file s Image: image t ype fi les Music: audio t ype fi les All: files of al l type s
4, File operati on menu
5, File arrange ment menu
6, Main display a rea
Click to impor t requ ired image fr om mem ory card
Click to selec t Whit eboard writ ing sy mbols, can click or che ck to se lect
Click to write , pres s long for thre e seco nds to enter se ttin g screen, to set b rush c olor and thic knes s
Click to erase w riti ng symbols, c an be er ased by box sel ecti on
Click to cance l previous step ope rati on
Click to resto re can celled oper atio n
Display writ ing page number dis play ed by current p ictu re
Click to add a new p age of writing imag e
Finder
Sort By N ame
Sort By Ty pe
Sort By S ize
Sort By Ti me
USB 1
USB 2
Offi ce Note Vide o Pictur e Audi o All
Selec t Selec t All Diselec t New Copy Cut Delete Paste Ren ame
Click with tou ching pen to enter co rres ponding sto rage d evices area
Click menu ico n with touch pen to pop u p menu o ptions {order (type /siz e/time)} Click exit ico n with t ouch pen to dir ectl y exit resour ce bro wse.
Can perform ba sic operations to ward s file such as select/del ete/create/co py/c ut
Divided into t wo arrangement mo des by i con and by list
Display file s of cor respondin g type i n memory card
21
Conn ectin g and S et tin g
Menu Operation
Troub lesho oti ng
Care a nd Ma in ten an ce
Disp lay Mod e
Inst allat ion
Browser
load ing.. .
http ://ww w.goog le.co m/
In connected n etwork state, ent er web b rowsing for s urfi ng the internet, cl ick on " X" symbol in the upper lef t corn er to close it
PIP
1
3
4
Enter channe l browse to pop up pict ure- in-pictur e inte rface in disp laye d image (as shown in Fig ure 1)
Press button o n remo te control or d irec tly click pic ture -in-picture dis play interface po int "4 " with touchin g pen, to pop up channe l sele ction list of p ictu re-in-pic ture ( as shown in the above figure "2"), p ress b utton on remo te con trol to move select ion cursor into cha nnel l ist, then press button t o sele ct correspo ndin g channels. When se lection cursor re ache s the channel you need, pres s Ente r key to play ima ge and s ound of relat ed cha nnel on interface “ 4”, or directly click the chan nel you need to enter w ith to uch pen.
Picture-in -picture interf ace op eration key i s show n in above figu re “3” .
Click pictur e-in-picture ch anne l for full scre en
Click to exit pi ctur e-in-pict ure in terface
ScreenSettings
Shortcut Set ting i s setting men u, see p age 13
SimpleTouch
Finder Brows er PIP
DisplaySettings Apps
2
22
Conn ectin g and S et tin g
Menu Operation
Troub lesho oti ng
Care a nd Ma in ten an ce
Disp lay Mod e
Inst allat ion
Apps
Close curren t picture played
Setting
Browser
SimpleTouch
Kingsoft Office
Three Multimedia File Playback Interface
Image play
Magnify curr ent pi cture playe d Reduce curre nt picture played Play previou s picture
Play next pict ure
Play/pause
Counterclo ckwise rotate cur rent p icture play ed Clockwise ro tate current pict ure pl ayed Play setting { Anim ation effe ct (on /off)/Slide ti me int erval/Set a s wall paper}
Finder
Setti ng
Brows er SimpleTouch
Finder
See page 15
See page 21
See page 19-20
See page 20
Office appl icat ion softwar e
Plyin g Setti ng
anima tion ef fect
playi ng inte rval ti ..
Set Wal lpape r
Kings oft Off ice
SimpleTouch
Finder
Brows er PIP
DisplaySettings
Apps
23
Conn ectin g and S et tin g
Menu Operation
Troub lesho oti ng
Care a nd Ma in ten an ce
Disp lay Mod e
Inst allat ion
Close curren t audio file played
Audio play
Play previou s audio file
Play next audi o file
Play/pause
Playlist
Video play
Loop play Random play Single play
Close curren t video file played Play previou s video file
Play next audi o file
Play/pause
Playlist
Fast backwar d
Fast Forward
24
Simple troubleshooting
PC mode
Touch Function
Video function not working normally
Audio function can't work normally
Remote control failure
Machine automatically
1.Check whether there are other objects between remote control and television remote control receiving
2.Check whether the battery electrode in the remote control is correct.
3.Check whether remote control needs to replace battery.
1.Whether set sleep or not.
2.Check whether there is sudden power outage.
3.Check whether there is no signal automatic shutdown.
1.Check whether display is set correctly.
Signal out of range
Background has vertical
Image lack of color,
Display format that is
2.Check whether resolution is the best resolution.
3.Adjust line and field synchronization in menu.
1.Select automatic correction in menu.
2.Adjust clock and phase position in menu.
1.Check whether VGA is not well connected or has quality problem.
2.Adjust chromaticity and brightness or contrast in menu.
1.Select automatic correction in menu.
2.Adjust clock and phase position in menu.
Touch function invaild
Touch positioning not
1.Check whether touch driver is installed and started.
2.Check whether the size of article touched is comparable with finger.
1.Check whether driver is properly installed and make correction.
2.Check whether touch pen is facing the screen.
No picture and no sound
With horizontal or vertical
No color, color is weak
With image but without
Only one speaker has
VGA output without
1.Check whether the device has been turned on.
2.Check whether the signal wire is properly plugged in and whether the input selected is corresponding
3.If in internal computer mode, check whether internal computer is started.
1.Check whether signal wire is well connected.
2.Check whether other electronic equipment or power tools are placed around the machine.
1.Adjust chromaticity and brightness or contrast in menu.
2.Check whether signal wire is well connected.
1.Check whether mute button is pressed for mute.
2.Press VOL. + / - to adjust volume.
3.Check whether audio line is connected correctly.
1. Check whether external device is connected to the heaphone cable.
1.Adjust sound balance in menu.
2.Check whether computer sound control panel only sets up one sound channel.
3.Check whether audio line is connected correctly.
Machine fails to work normally
window, thus leading to failure of remote control.
shut down
lines or streaks
color is incorrect
not supported
correct
stripes or image dithering
or image is weak
sound
sound
sound
Connecting and Setting
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
Installation
to it.
Audio function not working normally
25
1.VGA Mode
Resolution / Display mode
Field frequency (Hz)
2.HDMI Mode
Maintenance
Proper maintenance can avoid many early faults; regular careful cleaning can keep the device running like new;
Clean screen
Clean face frame
Please mix and stir even a little fabric softener or tableware detergent with warm water.
Please use a soft cloth to be completely soaked in the mixture.
Please take out cloth and twist to half dry state to wipe machine screen.
Please use dry, soft, lint-free cloth to wipe front frame ,
.
Repeat for several times, pay attention not to squeeze water flow into
please unplug the power plug before cleaning and during maintenance to prevent electric shock.
machine when wiping machine.
No use of machine for a long time In case of no use of machine for a long time, such as holiday, please make sure to unplug the plug to prevent any possible dangers caused by power supply ripple from lightning.
i
Resolution / Display mode
Field frequency (Hz)
Connecting and Setting
Installation
Menu Operation
Troubleshooting
Care and Maintenance
Display Mode
Loading...