Special Tomato 66 Series User Manual
User Manual
Model# Series
66XXXXXX
UM-RSS-07-19LIT
Please read these warnings before using your
Recliner Support System.
WARNING: AVOID SERIOUS INJURY FROM FALLING OR SLIDING OUT. ALWAYS USE THE RECLINER SUPPORT
SYSTEM 5-POINT HARNESS. NEVER LEAVE OCCUPANT UNATTENDED.
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THEM FOR FUTURE
REFERENCE. THE OCCUPANT’S SAFETY IS YOUR RESPONSIBILITY.
GENERAL INFORMATION & SAFETY
• Follow all instructions carefully. Incorrect use can
cause damage to Recliner Support System.
• IMPORTANT: The 5-Point Positioning Harness
be correctly installed and adjusted before
must
using the Recliner Support System. See Page
18 for instructions.
• Occupant should always be properly secured with
the included 5-Point Harness whenever using the
Recliner Support System.
• Never leave occupant unattended.
• Never allow occupant to stand on any part of the
Recliner Support System.
• Never leave the Recliner Support System exposed to
direct sunlight or close to heat sources, e.g. a radiator
or open ame.
CARE AND CLEANING
• Before each use, ensure that all product straps are in
good working order and show no signs of fraying.
CLEANING
• The Recliner Support System may be cleaned using
a damp cloth with mild detergent. Always air-dry the
Recliner Support System before use or storage.
• In order to machine-wash the Recliner Support System, refer to Page 20 for detailed washing instructions.
• Store Recliner Support System in a cool, dry location.
Never fold or store the Recliner Support System if the
product is not completely dry.
The manufacturer reserves the right to make design changes to any of its products as part of its continuous design
improvement program.
Table of Contents
Recliner Support System
Components ...............................................................................4–5
Optional Cushions
..........................................................................6
Assembly
Recliner Drape & Base Fabric ....................................................7–8
5-Point Positioning Harness
Fabric Liner Pad
Optional:Soft-Touch Hip-Flex Seat Liner Cushion
Optional:Soft-Touch Back Liner Cushion
Shoulder, Waist, Crotch, & Chest Pads
Headrest
Calf Cushions
Legrest
.......................................................................................15
..........................................................................................17
...........................................................................11
...............................................................................16
.....................................................9–10
........................12
......................................13
........................................14
5-Point Positioning Harness Adjustment ............................18
Folding for Storage .....................................................................19
Washing Instructions ...........................................................20–21
Warranty & Contact Information.............................................22
3
ComponentsRecliner Support System
Your Recliner Support System should include the following (not to scale):
Base Fabric
Strap Guide Holes
Backrest
Section
Seat Bight
Fabric Liner Pad
Seat
Section
Legrest
Section
Recliner Drape
Seat Bight Securement Strap
Legrest Securement Strap
4
ComponentsRecliner Support System
Headrest
Headrest
Support Pads
Headrest Cushion
Headrest Straps
5-Point Harness
Calf Cushions
Calf Cushion
Attachment Straps
Calf Cushions
Shoulder Strap
Shoulder Pads (x2)
Chest Pad
Waist Pads (x2)
Lower Chest Strap
Waist Strap
Crotch Strap Crotch Pad
5
Recliner Support System
Optional Cushions
Optional: Soft-Touch Hip-Flex Seat and Back Liners
®
*Depth of Back Cushions are 1” thick at the
narrowest point and 4” thick at the widest point.
6
Assembly
Recliner Drape & Base Fabric
What you’ll need for this page:
Recliner Drape
1. Place
Recliner
Chair in
fully-reclined
position
and center
Recliner
Drape across
Recliner
Chair seat
and arms.
2. Place Base
Fabric
over Recliner
Drape. Be
sure to align
Velcro strips
on bottom
of the Base
Fabric with
matching
Velcro strips
on top of
Recliner
Drape.
Seat Bight Securement Strap
Base Fabric
Ensure back edge of
Recliner Drape is
ush with rear edge
of the Recliner
Chair armrests.
3. Attach
Seat Bight
Securement
Strap to the
Base Fabric
Velcro patch
as shown
here.
Seat Bight
Velcro patch
4. Move
Recliner
Chair
into fully
upright
position.
7
Loading...