Spears PD-400-001C-10, PD-400-002C-10, PD-400-003C-10, PD-400-005C-10, PD-400-007C-10 User Manual

Schedule 80 CPVC Pipe Dimensions & Pressure Ratings

Schedule 80 CPVC Pipe

Nom. Pipe

Size (in)

1/4 .540 .282 0.119 0.117 1130

3/8 .675 .403 0.126 0.163 920
1/2 .840 .526 0.147 0.225 850

3/4 1.050 .722 0.154 0.304 690

1 1.315 .936 0.179 0.449 630

1-1/4 1.660 1.255 0.191 0.617 520

1-1/2 1.900 1.476 0.200 0.751 470

2 2.375 1.913 0.218 1.040 400

2-1/2 2.875 2.290 0.276 1.582 420

3 3.500 2.864 0.300 2.121 370

3-1/2 4.000 3.326 0.318 2.735 350

4 4.500 3.786 0.337 3.2101 320
5 5.563 4.768 0.375 4.800 290

6 6.625 5.709 0.432 6.200 280

8 8.625 7.565 0.500 9.042 250
10 10.750 9.493 0.593 13.018 230

12 12.750 11.294 0.687 18.350 230

14 14.000 12.410 0.750 23.260 220
16 16.000 14.213 0.843 29.892 220

18 18.000 16.014 0.937 35.421 220
20 20.000 17.814 1.031 45.879 220

24 24.000 21.418 1.218 64.958 210

Average O.D. Average I.D. Min. Wall Nominal Wt./Ft.

Schedule 80 CPVC Technical

Maximum.

W.P. PSI*

Maximum CPVC Service Temperature 200°F

Pressure De-rating at Elevated Temperatures

The pressure ratings given above are for water, non-shock, @ 73°F. The
specified derating factors for CPVC are suitable for pipe conveying water
at elevated temperatures. To determine elevated temperature rating,
multiply 73°F [23°C] pressure rating by appropriate factor shown in the
table for desired operating temperature. When working near maximum
specified temperature, solvent cement joints are recommended in place of
threaded connections. Where disassembly is required at elevated

®

temperatures, use Spears
unions or grooved coupling connections. Spears

Special reinforced (SR) adapters, flanges,

®

recommends that only

Schedule 80 or heavier wall thickness pipe should be threaded.

See Plastic Pipe Engineering Guide for additional information

CPVC Pipe

Operating Temp (°F) De-Rating Factor

73 1.00
90 0.91

100 0.82

110 0.72

120 0.65

130 0.57

140 0.50

150 0.42

160 0.40
170 0.29

180 0.25

200 0.20

EX: 2" CPVC SCHEDULE 80 @

120°F = 400 psi x 0.65 = 260 psi max. @ 120°F

Made in the U.S.A.

Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas

See Spears® Product Sourcebook for product offerings

Page 54

Schedule 80 CPVC Pipe Dimensions & Pressure Ratings

Pipe - CPVC Schedule 40 Plain
End

10' Lengths

Schedule 80 CPVC Technical

Part Number Size L AVG.O.D.

PD-400-001C-10 1/8 10 .405 .068 .09
PD-400-002C-10 1/4 10 .540 .088 .09
PD-400-003C-10 3/8 10 .675 .091 .12
PD-400-005C-10 1/2 10 .840 .109 .18
PD-400-007C-10 3/4 10 1.050 .113 .23
PD-400-010C-10 1 10 1.315 .133 .35
PD-400-012C-10 1-1/4 10 1.660 .140 .47
PD-400-015C-10 1-1/2 10 1.900 .145 .56
PD-400-020C-10 2 10 2.375 .154 .77
PD-400-025C-10 2-1/2 10 2.875 .203 1.20
PD-400-030C-10 3 10 3.500 .216 1.57
PD-400-040C-10 4 10 4.500 .237 2.23
PD-400-050C-10 5 10 5.563 .258 2.87
PD-400-060C-10 6 10 6.625 .280 3.94
PD-400-080C-10 8 10 8.625 .322 5.95
PD-400-100C-10 10 10 10.750 .365 8.53
PD-400-120C-10 12 10 12.750 .406 10.83
PD-400-140C-10 14 10 14 .437 13.26
PD-400-160C-10 16 10 16 .500 18.16
PD-400-180C-10 18 10 18 .562 22.27
PD-400-200C-10 20 10 20 .593 26.46
PD-400-240C-10 24 10 24 .687 38.36

Minimum

Wall

Pipe - CPVC Schedule 40 Plain
End

20' Lengths

Approx. Wt.

(Lbs./Ft)

Part Number Size L AVG.O.D.

PD-400-001C 1/8 20 .405 .068 .09
PD-400-002C 1/4 20 .540 .088 .09
PD-400-003C 3/8 20 .675 .091 .12
PD-400-005C 1/2 20 .840 .109 .18
PD-400-007C 3/4 20 1.050 .113 .23
PD-400-010C 1 20 1.315 .133 .35
PD-400-012C 1-1/4 20 1.660 .140 .47
PD-400-015C 1-1/2 20 1.900 .145 .56
PD-400-020C 2 20 2.375 .154 .77

Page 55

Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas

See Spears® Product Sourcebook for product offerings

Minimum

Wall

Approx. Wt.

(Lbs./Ft)

Spears® Manufacturing Company