Insert Fittings Technical
Barbed Insert Fittings Weights & Dimensions
Dimensions of Insert Ends
ASTM D 2609
Nominal
Size in.
1/2 1-1/4 .665 .635 .015 .406
3/4 1-1/4 .865 .835 .015 .562
1-1/4 1-1/4 1.425 1.395 .025 .995
1-1/2 1-1/2 1.665 1.630 .030 1.125
2-1/2 2 2.520 2.487 .030 2.062
Insert Length
"P" min.
1 1-1/4 1.095 1.065 .020 .750
2 1-1/2 2.125 2.085 .030 1.656
3 2-1/8 3.125 3.086 .030 2.600
4 3 4.090 4.044 .030 3.525
Barb O.D. "Z"
max. min.
Barb Depth
"V" min.
Diameter "D"
Inside
min.
Dimensions of Polyethylene Pipe
ASTM D 2104 and D 2239
Nominal Size in. Average I.D. in. Tolerance in.
1/2 .622 +.010 - .010
3/4 .824 +.010 - .015
1 1.049 +.010 - .020
1-1/4 1.380 +.010 - .020
1-1/2 1.610 +.015 - .020
2 2.067 +.015 - .020
2-1/2 2.469 +.015 - .025
3 3.068 +.015 - .030
4 4.026 +.015 - .035
Insert Fittings Dimensions
G = (LAYING LENGTH) Intersection of center lines to insert bottom or thread bottom; 90° elbows, tees & crosses; ± 1/32 inch.
H = Intersection of center lines to end of insert or face of fitting; 90° elbows, tees & crosses; ± 1/32 inch.
L = Overall length of fittings; ± 1/16 inch.
N = (LAYING LENGTH) Insert bottom to insert bottom or thread bottom; couplings & straight adapters; ± 1/16 inch.
Dimensions of Spiral
Barb Ends
• ASTM D 2609
Plastic Insert Fittings for
Polyethylene (PE) Plastic Pipe.
It is the users responsibility to determine the suitability for the intended service application.
Page 11
STANDARDS & SPECIFICATIONS
• Material
®
Insert Fittings are produced from PVC
Spears
National Sanitation Foundation (NSF
Standard 14 Plastic Fittings for
Potable Water.
Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas
See Spears® Product Sourcebook for product offerings
)
®
Type 1, Minimum Cell Classification 12454.
CPVC Minimum Cell Classification 23447.
Spears® Manufacturing Company
Coupling - PVC
Insert x Insert
Dimensions Also Applicable to
1429-XXXC CPVC Inserts
Insert Fittings Technical
Barbed Insert Fittings Weights & Dimensions
Part Number Size L N
1429-005 1/23- 1/81/8 .02
1429-007 3/4 3- 1/16 1/16 .03
1429-010 1 3- 3/16 3/16 .05
1429-012 1-1/4 3- 3/16 3/16 .08
1429-015 1-1/2 3-19/32 3/32 .10
1429-020 2 3-17/32 1/16 .12
1429-025 2-1/2 4-19/32 7/32 .23
1429-030 3 4-13/16 5/16 .30
1429-040 4 6-13/32 3/8 .59
1429-060 6 7-27/32 13/32 1.64
1429-080
* Fabricated
*
8 9- 7/8 3/16 7.10
Coupling, Reducer - PVC
Insert x Insert
Part Number Size L N
1429-101 3/4X1/2 3- 1/8 1/8 .02
1429-130 1X1/2 3- 1/8 1/8 .04
1429-131 1X3/4 3- 3/16 3/16 .04
1429-1315 1X7/8 3- 1/4 1/4 .05
1429-167 1-1/4X3/4 3- 1/8 1/8 .05
1429-168 1-1/4X1 3- 1/16 1/16 .06
1429-210 1-1/2X3/4 3- 3/8 1/8 .08
1429-211 1-1/2X1 3- 3/8 1/8 .07
1429-212 1-1/2X1-1/4 3- 3/8 1/8 .09
1429-249 2X1 3- 3/8 1/8 .11
1429-250 2X1-1/4 3- 3/8 1/8 .13
1429-251 2X1-1/2 3- 5/8 1/8 .13
1429-291 2-1/2X1-1/2 4 1/8 .17
1429-422 4X3 5- 9/16 5/16 .50
1429-532 6X4 8-15/32 2- 3/16 1.51
Approx. Wt.
(Lbs.)
Approx. Wt.
(Lbs.)
Page 23
Suitable for Oil-Free air handling to 25 psi, not for distribution of compressed air or gas
See Spears® Product Sourcebook for product offerings
Spears® Manufacturing Company
Loading...